Comparator and Reference Circuits
Preliminary Technical Data
ADCMP350–ADCMP357
Rev. PrB
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.
FEATURES
Comparators with 0.6V or 1.2V On-Chip References
Output Stages
Open-Drain Active-Low (ADCMP350/1)
Push-Pull Active-Low (ADCMP352/3)
Open-Drain Active-High (ADCMP354/5)
Push-Pull Active-High (ADCMP356/7)
High Voltage (up to 22V) tolerance on VIN and Open-Drain
Output Pins
Low Power Consumption (10µA)
10nA Input Bias Current
20mV Hysteresis
Specified Over -40°C to +125°C Temperature Range
4-Lead SC70 Package
APPLICATIONS
Microprocessor Systems
Computers
Controllers
Intelligent Instruments
Portable Equipment
GENERAL DESCRIPTION
The ADCMP350-ADCMP357 are comparator and reference
circuits suitable for use in general purpose applications. High
performance over the -40°C to +125°C temperature range make
them suitable for use in automotive and other thermally harsh
applications, while low power consumption and space efficient
SC70 packaging make them ideal for battery powered portable
equipment
FUNCTIONAL BLOCK DIAGRAMS
V
IN
ADCMP350/1/4/5
GND
OUT/OUT
V
CC
V
CC
ADCMP352/3/6/7
GND
OUT/OUT
V
CC
REF
REF
V
IN
Table 1. Selection Table
Output Stage
Part No. Reference
Voltage (V) OUT OUT
ADCMP350 0.6 Open-Drain -
ADCMP351 1.2 Open-Drain -
ADCMP352 0.6 Push-Pull -
ADCMP353 1.2 Push-Pull -
ADCMP354 0.6 - Open-Drain
ADCMP355 1.2 - Open-Drain
ADCMP356 0.6 - Push-Pull
ADCMP357 1.2 - Push-Pull
ADCMP350–ADCMP357 Preliminary Technical Data
Rev. PrB | Page 2 of 4
SPECIFICATIONS
(VCC=Full Operating Range, TA=-40°C to +125°C, unless otherwise noted.)
Parameter Min Typ Max Units Test Conditions/Comments
SUPPLY
VCC Operating Voltage Range 2.25 3.6 V
VIN Operating Voltage Range 22 V
Supply Current 10 15 µA
INTERNAL REFERENCE
ADCMP350/2/4/6 0.585 0.6 0.615 V VCC=3.3V, TA=-40°C to +85°C
0.579 0.6 0.621 V VCC=3.3V, TA=-40°C to +125°C
ADCMP351/3/5/7 1.17 1.2 1.23 V VCC=3.3V, TA=-40°C to +85°C
1.158 1.2 1.242 V VCC=3.3V, TA=-40°C to +125°C
VIN HYSTERESIS 20 mV
INPUT BIAS CURRENT 10 nA VCC=3.3V
THRESHOLD TEMPERATURE COEFFICIENT 30 ppm/ºC
VIN TO OUT DELAY 5 µs VIN= VTH to (VTH-100mV)
OUT/OUT VOLTAGE LOW 0.3 V VIN<VTH min, ISINK=1.2mA
OUT/OUT VOLTAGE HIGH 0.8xVcc V VIN>VTH max, ISOURCE=500µA
OUT/OUT OPEN-DRAIN OUTPUT LEAKAGE CURRENT 1 µA
VCC>VTH, OUT/OUT=22V
ABSOLUTE MAXIMUM RATINGS
Table 3. TA = 25°C unless otherwise noted.
Parameter Rating
VCC -0.3V to +6V
VIN -0.3V to +25V
OUT, OUT (Open-Drain) -0.3V to +25V
OUT, OUT (Push-Pull) -0.3V to (VCC+0.3V)
Operating Temperature Range -40°C to +125°C
Storage Temperature Range -65°C to +150°C
θJA Thermal Impedance, SC70 146°C/W
Lead Temperature
Soldering (10 sec) 300°C
Vapour Phase (60 sec) 215°C
Infrared (15 sec) 220°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Preliminary Technical Data ADCMP350–ADCMP357
Rev. PrB | Page 3 of 4
PIN CONFIGURATION AND FUNCTIONAL DESCRIPTIONS
1
23
4VCC
GND
OUT
VIN
ADM109x
Table 4. Pin Functional Descriptions
Pin No. Name Description
1 VIN Monitors analog input voltage
2 GND Ground
3 OUT/OUT Digital output. Active-high or active-low and open-drain or push-pull options
depending on model number
4 VCC Power supply
ESD CAUTION
`
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
ADCMP35x
ADCMP350–ADCMP357 Preliminary Technical Data
Rev. PrB | Page 4 of 4
OUTLINE DIMENSIONS
0.30
0.15
0.10 MAX
1.00
0.80
SEATING
PLANE
0.18
0.10 0.30
0.10
0.10 COPLANARITY
2
4 3
1
2.20
1.80
PIN 1
0.50 BSC
0.70
0.50
1.35
1.15
2.40
1.80
1.10
0.80
0.65 BSC
PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82
EXCEPT FOR WIDTH OF PIN-2 AS SHOWN
Figure 1. 4-Lead Thin Shrink Small Outline Transistor Package [SC70]
(EIAJ SC82 body)
(KS-4)
Dimensions shown in millimeters
ORDERING GUIDE
Model Temperature Range Package Type Branding
ADCMP350AKS -40°C to +125°C SC70-4 M0Z
ADCMP351AKS -40°C to +125°C SC70-4 M10
ADCMP352AKS -40°C to +125°C SC70-4 M11
ADCMP353AKS -40°C to +125°C SC70-4 M12
ADCMP354AKS -40°C to +125°C SC70-4 M13
ADCMP355AKS -40°C to +125°C SC70-4 M14
ADCMP356AKS -40°C to +125°C SC70-4 M15
ADCMP357AKS -40°C to +125°C SC70-4 M16
© 2004 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective companies.
Printed in the U.S.A. PR04746-0-4/04(PrB)
