TS, 1N5400 THRU 1N5408 3.0 AMPS. SILICON RECTIFIERS Voltage Range 50 to 1000 Volts Current 3.0 Amperes DO-201AD Features ; @ Low forward voltage drop @ High current capability @ High reliability 1.0(25.4) @ High surge current capability .220(5.6) MIN. . 197(5.0) Mechanical Data DIA. Ly Cases:Molded plastic U e Epoxy:UL 94V-0 rate flame retardant .375(9.5) e Lead:Axial leads,solderable per MIL-STD-202, : 335(8.5) Method 208 guaranteed @ Polarity:Color band denotes cathode end e High temperature soldering guaranteed: 4.0(25.4) 250C/10 seconds/.375",(9.5mm) lead MIN. lengths at 5 Ibs.,(2.3kg) tension Maat }<___ | e Weight:1.2 grams DIA. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60HZz, resistive or inductive load. For capacitive load, derate current by 20% Type Number 1N5400 | 1N5401 | 1N5402 |1N5404 | 1N5406 |1N5407 | 1N5408] UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Vv Maximum RMS Voltage Vems | 3 70 140 280 420 560 700 Vv Maximum DC Blocking Voltage Vpc 50 100 200 400 600 800 1000 Vv Maximum Average Forward Rectified Current 3.0 A -375"(9.5mm) Lead Length @TA = 75 C IF(AV) . Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load IFsm A (JEDEC method) 200 Maximum Instantaneous Forward Voltage @2.0A VF 1.0 Vv Maximun DC Reverse Current @ Ta=25" IR 5.0 uA at Rated DC Blocking Voltage @ TA=100C 100 uA Maximun Full Load Reverse Current, Full A Cycle Average .375"(9.5mm) Lead Length | 30 u @TL=75C R Typical Junction Capacitance (Note 1) Cy 50 pF Typical Thermal Resistance (Note 2) Rea 8 cwW Operating Temperature Range T -55 to+125 c Storage Temperature Range TsTG -55 to+150 C NOTES: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2.Thermal Resistance from Junction to Ambient .375"(9.5mm) Lead Length. RATING AND CHARACTERISTIC CURVES 1N5400 THRU 1N5408 TS, FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60Hz |___ Resistive or Inductive Load .375"(9.5mm) Lead Length 1 \ AVERAGE FORWARD CURRENT AMPERES ND n 50 75 100 AMBIENT TEMPERA TURE. (C) 0 25 125 150 175 FIG.4-TYPICAL REVERSE CHARACTERISTICS 10 Tj=100C o Tj=25C Pulse Width=300#s 1% Duty Cycle INSTANTANEOUS FORWARD CURRENT.(A) = a So & .01 A 6 8 1.0 1.2 FORWARD VOLTAGE.(V) 14 16 1.8 PEAK FORWARD SURGE CURRENT.(A) INSTANTANEOUS FORWARD CURRENT.(A) = a 3 a = oO S PEAK FORWARD SURGE CURRENT.(A) N So S a o FIG.2- MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT 8.3ms Single Half Sine-Wave JEDEC Method 5 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL JUNCTION CAPACITANCE = 5 10 REVERSE VOLTAGE.(V) 50 100 FIG.5- TYPICAL REVERSE CHARACTERISTICS 20 40 60 80 RERCENT OF RATED PEAK REVERSE VOLTAGE.(%) 100 120 140