Standard Products RAD7260-NCx Power MOSFET Die Data Sheet April, 2012 www.aeroflex.com/MOSFETS FEATURES INTRODUCTION 200Vbreakdown voltage 50 A current rating 0.034RDS(on) Aeroflex RAD's new radiation tolerant power MOSFETs are now available in die, seven standard package options and custom packaging for HiRel environments. Applications within military, aerospace, medical, nuclear power generation, high energy physics research laboratories can benefit from the use of this new series of MOSFETs. Aeroflex's Power MOSFETs are radiation tolerant to 100 krad(Si) and SEGR/SEB immune to their full rated breakdown potential. 150nC gate charge -55oC to +125oC temperature range Operational Environment radiation testing to MIL-STD750 - Total-dose: 100 krads(Si) - SEGR/SEB immune to Xe at full rated drain potential Bare Die - Prototype, EMs and Class S Drop-in compatible with industry standards Class S MOSFETs built to your custom flow Operational power losses are minimized by Aeroflex's ideal combination of low RDS(on) and gate charge. Die size is optimized for maximum current rating while meeting industry norms. These units are suitable for standalone and hybrid applications. The RAD7260-NCx Die are well suited for low loss switching applications, such as DC-to-DC Converters and solid-state relays. They are drop-in compatible with industry standards. ELECTRICAL CHARACTERISTICS (Case temperature (Tc) = 25oC unless otherwise specified) CHARACTERISTICS Drain-Source Breakdown Voltage Gate-Threshold Voltage Gate-Body Leakage Zero-Gate Leakage Drain Current TEST CONDITIONS MIN TYP MA X Vgs - 0V, Id = 1mA 200 - - V Vgs(th) Vds = Vgs, Id = 1.0mA 2.0 - 4.0 V Vgs = +20V - - 100 nA - - 25 250 A - - 0.034 ohms - - 150 nC V Igss Idss1 Vds = 160V, Vgs = 0V Idss2 Vds = 160V, Vgs = 0V, Tc = 125oC Rds(on) Vgs = 12V, Id = 40A Gate Charge at 12V Qg(12) Vgs = 12V Junction-to-Case UNITS BVdss Drain-Source On Resistance Diode Forward Voltage LIMITS Id = 50A Vdd = 100V Vsd Id = 50A, Vgs = 0V 0.6 - 1.2 Rjc NA/Die - - - o C/W POST-RADIATION ELECTRICAL CHARACTERISTICS CHARACTERISTICS Drain-Source Breakdown Voltage3,4 TEST CONDITIONS Vgs(th) UNITS MIN MAX Vgs - 0V, Id = 1mA 200 - V Vgs = Vds, Id = 1.0mA 1.5 4.0 V Bvdss Gate-Threshold Voltage3,4 LIMITS Gate-Body Leakage Forward2,3,4 Igss Vgs = +20, Vds = 0V - 100 nA Zero-Gate Voltage Drain Current 3,4 Idss Vgs = 0V, Vds = 160V - 25 A Vgs = 12V, Ids = 40A - 0.034 ohms Rds(on) Drain-Source On-Resistance1,3,4 Notes:* for die products, the maximum current may be limited by packaging 1. Pulse test, 300us max 2. Absolute value 3. Gamma = 100 krads(Si) 4. Gamma irradiation bias at both Vgs = 12V, Vds = 0V and Vgs = 0V, Vds = 80% BVdss SEE (SINGLE-EVENT-EFFECTS) CHARACTERISTICS Single Event Effects - Safe Operating Area SYMBOL ENVIRONMENT1 ION SPECIES ENERGY (MeV) TYPICAL LET (MEv/MG/CM2) TYPICAL RANGE (u) APPLIED VGS BIAS (V) MAX VDS BIAS (V)2 Kr 906 30 113 -10 200 Xe 1232 59 99 -5 200 Notes: 1. Fluence = 1E6 ions/cm2 (typical), T = 25oC 2. Does not exhibit Single Event Burnout (SEB) or Single Event Gate Rupture (SEGR). DIE FEATURES Die Size - 0.279" x 0.324" Nominal Gate Pad - .010" x 0.22"Nominal Source Pad - 0.109" x 0.270" Nominal Die Thickness - 14 mils Top Metal - 40kA (+10%) A1 1% Si Back Metal - Ti(2kA)NiV(10kA)Ag(2kA) (+10%) 2 ELECTRICAL TESTING AT WAFER PROBE: CURRENT LOWER LIMIT VOLTAGE igss Vgs=5V 100 igss Vgs=20V 100 igss Vgs-30V 1 idss Vds=160V 2 25 uA idss Vds=200V 10 1000 uA bvdss Ids=1mA UPPER LIMIT LOWER SPEC ITEM 200 UPPER SPEC UNIT uA 100 nA uA 200 V rdon Vgs=12V Ids=0.5A .034 .034 m rdon Vgs=12V Ids=2A .034 .034 m vsd Isd=2A 0.6 1.2 0.6 1.8 V vth Ids=250A 2.7 3.9 2.00 4.00 V 100 nA igssr Vgs=-20V 100 igssr Vgs=-30V 1 uA idss Vds=200V 10 uA igss Vgs=20V 100 100 nA AEROFLEX RAD RAD7260-NCx PART NUMBERING: PART # BREAKDOWN POTENTIAL (V) RDSON (m) DRAIN CURRENT (A) GATE CHARGE (nC) TID LEVEL (krad(SI) SEE Die size PKG SCREENING RAD7260-NCP 200 34 50 150 100 Xe 6 Bare Die Prototype RAD7260-NCE 200 34 50 150 100 Xe 6 Bare Die EM RAD7260-NCS 200 34 50 150 100 Xe 6 Bare Die Space 3 Aeroflex RAD- Datasheet Definition Advanced Datasheet - Product In Development Preliminary Datasheet - Shipping Prototypes Datasheet - Class S Compliant, QML or JAN COLORADO Toll Free: 800-645-8862 Fax: 719-594-8468 INTERNATIONAL Tel: 805-778-9229 Fax: 805-778-1980 NORTHEAST Tel: 603-888-3975 Fax: 603-888-4585 SE AND MID-ATLANTIC Tel: 321-951-4164 Fax: 321-951-4254 WEST COAST Tel: 949-362-2260 Fax: 949-362-2266 CENTRAL Tel: 719-594-8017 Fax: 719-594-8468 www.aeroflex.com info-ams@aeroflex.com Aeroflex RAD (Aeroflex) reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused 4