T-11-622-D3-SSC-GR - Source Photonics, Inc.

T-11-622-D3-SXX-XX

622Mbps PIN-TIA Receiver Modules-ROSA (3.3V)

20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486

9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213

LUMNDS548-MAY0806

rev. A.1

LUMINENTOIC.COM

Features

• InGaAs/InP PIN Photodiode with transimpedance ampliﬁ er

• High sensitivity with AGC*

• Differential ended output

• Single +3.3V operation

• -40~85ºC operating temperature

Packaging

• SC/LC/MU ROSA package

Application

• 622Mbps SONET/SDH receivers

• 622Mbps ATM receiver

• RoHS Compliant available

Parameter Symbol Value Unit

Supply Voltage VCC 4.5 V

Operating Temperature Topr -40 ~ 85 ºC

Storage Temperature Tstg -40 ~ 85 ºC

Absolute Maximum Ratings (Tc=25ºC)

Parameter Symbol Min Typ Max Unit Test Conditions

Detection Range -1100 1310 1650 nm -

Gain@10Mbps Differential G 6 7 - V/mW Measure differentially, AC coupled,

RL=50Ω

Bandwidth (to -3dB point) BW 404 470 - MHz -

Saturation Power Psat -7 -6 - dBm BER<10-10@622Mbps, PRBS223-1

Er=10dB

Sensitivity Sens. - -33 -30 dBm BER<10-10@622Mbps, PRBS223-1

Er=10dB

Output Resistance Rout 48 50 52 ohm -

AC/Optical and Electrical Characteristics (Tc=25ºC)

(Operating at VCC=3.3V,Tc=25ºC, λ=1310nm, 9/125µm SM ﬁ ber)

Note: 1.Pin assignment can be customized.

2.Speciﬁ cations subject to change without notice.

Parameter Symbol Min. Typ. Max. Unit

Power Supply VCC 3.0 3.3 3.6 V

Differential Ouptput Voltage Vd- 260 450 mV

Supply Current (no load) Icc - 21 30 mA

DC Electrical Characteristics (Tc=25ºC)

T-11-622-D3-SXX-XX

622Mbps PIN-TIA Receiver Modules-ROSA (3.3V)

20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486

9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213

LUMNDS548-MAY0806

rev. A.1

LUMINENTOIC.COM

Pin Assignment

Packaging Dimension Units in mm.

Pin assignment

1~Vcc

2~Dout

3~Dout

4~GND(CASE)

T-11-622-D3-SSC-XX

T-11-622-D3-SLC-XX

T-11-622-D3-SMU-XX

IMPORTANT NOTICE!

All information contained in this document is subject to change without notice, at Luminent＇s sole and absolute discretion.

Luminent warrants performance of its products to current specifications only in accordance with the company＇s standard one-year war-

ranty; however, specifications designated as “preliminary＂ are given to describe components only, and Luminent expressly disclaims

any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fit-

ness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company＇s Terms and Conditions of

Sale for further warranty information.

Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of pat-

ents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right,

copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein

are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in

implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using

or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any

damages resulting from such use or sale.

THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS＂ BASIS. Customer agrees that Luminent is not liable for any

actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this

document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that

the information contained herein is current.

Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment

is highly recommended. Follow guidelines according to proper ESD procedures.

Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.

622Mbps PIN-TIA Receiver Modules-ROSA (3.3V)

T-11-622-D3-SXX-XX

LUMNDS548-MAY0806

rev. A.1

20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486

9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213

LUMINENTOIC.COM

Warnings

Legal Notice

Ordering Information

D=ROSA

Package Connector

SC/LC/MU

Fiber Application

S=SM 9/125µm

RoHS Compliant

-/G5/GR

Blank = RoHS non-compliant product

GR = Full RoHS compliant product (no exemption)

Voltage

3=3.3V