ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) Dual Channel Quad Channel FEATURES A 1 8 E C 2 7 C * Current transfer ratio at IF = 10 mA C 3 6 C * Isolation test voltage, 5300 VRMS A 4 5 E A 1 16 E * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC C 2 15 C C 3 14 C A 4 13 E A 5 12 E C 6 11 C * CSA 93751 C 7 10 C * BSI IEC 60950; IEC 60065 A 8 9 E AGENCY APPROVALS * UL1577, file no. E52744 system code H, double protection * DIN EN 60747-5-2 (VDE 0884) available with option 1 i179015-3 V D E * FIMKO i179012-1 DESCRIPTION The ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input and output. The ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 are especially designed for driving medium-speed logic and can be used to eliminate troublesome ground loop and noise problems. Also these couplers can be used to replace relays and transformers in many digital interface applications such as CTR modulation. The ILD1, ILD2, ILD5 has two isolated channels in a single DIP package and the ILQ1, ILQ2, ILQ5 has four isolated channels per package. ORDERING INFORMATION I L x # - X 0 PART NUMBER # # DIP-# Option 6 7.62 mm 10.16 mm Option 7 Option 9 T PACKAGE OPTION TAPE AND REEL x = D (Dual) or Q (Quad) > 0.7 mm DUAL CHANNEL AGENCY CERTIFIED/PACKAGE UL, CSA, BSI, FIMKO > 0.1 mm QUAD CHANNEL CTR (%) 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 ILD1 ILD2 ILD5 - - - - ILD2-X006 - - - - SMD-8, option 7 ILD1-X007T (1) ILD2-X007T (1) - - - - SMD-8, option 9 ILD1-X009T (1) ILD2-X009T (1) ILD5-X009T (1) - - - DIP-16 - - - ILQ1 ILQ2 ILQ5 DIP-16, 400 mil, option 6 - - - ILQ1-X006 ILQ2-X006 - SMD-16, option 7 - - - ILQ1-X007 ILQ2-X007T (1) - SMD-16, option 9 - - - ILQ1-X009T (1) ILQ2-X009T (1) ILQ5-X009T (1) DIP-8 DIP-8, 400 mil, option 6 Rev. 1.8, 28-Jun-11 1 50 to 400 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors DUAL CHANNEL AGENCY CERTIFIED/PACKAGE QUAD CHANNEL CTR (%) VDE, UL, CSA, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 DIP-8 ILD1-X001 ILD2-X001 ILD5-X001 - - - - ILD2-X016 - - - - SMD-8, option 7 - ILD2-X017 - - - - SMD-8, option 9 ILD1-X019T - - - - - DIP-16 - - - - ILQ2-X001 - DIP-16, 400 mil, option 6 - - - - ILQ2-X016 - SMD-16, option 7 - - - - ILQ2-X017T (1) - DIP-8, 400 mil, option 6 50 to 400 Notes * Additional options may be possible, please contact sales office. (1) Also available in tubes; do not put T on end. ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Surge current IFSM 2.5 A Power dissipation Pdiss 100 mW 1.3 mW/C Derate linearly from 25 C OUTPUT Collector emitter reverse voltage Collector current ILD1 VCEO 50 V ILQ1 VCEO 50 V ILD2 VCEO 70 V ILQ2 VCEO 70 V ILD5 VCEO 70 V ILQ5 VCEO 70 V IC 50 mA IC 400 mA Pdiss 200 mW 2.6 mW/C 5300 VRMS t < 1 ms Power dissipation Derate lineary from 25 C COUPLER Isolation test voltage between emitter and detector VISO Creepage distance 7 mm Clearance distance 7 mm Isolation resistance VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Ptot 250 mW 3.3 mW/C C Package power dissipation Derate linearly from 25 C Storage temperature Tstg - 40 to + 150 Operating temperature Tamb - 40 to + 100 C Junction temperature Tj 100 C Tsld 260 C Soldering temperature (2) 2 mm from case bottom Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for throught hole devices (DIP). Rev. 1.8, 28-Jun-11 2 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 60 mA Reverse current VR = 6 V VR = 0 V, f = 1 MHz MIN. TYP. MAX. UNIT VF 1.25 1.65 V IR 0.01 10 A CO 25 pF TthJL 750 K/W CCE 6.8 pF INPUT Capacitance Thermal resistance, junction to lead OUTPUT Collector emitter capacitance VCE = 5 V, f = 1 MHz Collector emitter leakage current Saturation voltage, collector emitter VVCE = 10 V ICEO 5 50 nA IC = 1 mA, IB = 20 A VCESAT 0.25 0.4 V DC forward current gain VCE = 10 V, IB = 20 A hFE 200 650 1800 DC forward current gain saturated VCE = 0.4 V, IB = 20 A hFEsat 120 400 600 Thermal resistance, junction to lead Rthjl 500 K/W CIO 0.8 pF COUPLER Capacitance (input to output) VIO = 0 V, f = 1 MHz Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION IF =10 mA, VCE = 0.4 V IC/IF (collector emitter saturated) IF =10 mA, VCE = 10 V Rev. 1.8, 28-Jun-11 PART SYMBOL MIN. TYP. MAX. UNIT ILD1 CTRCEsat 75 % ILQ1 CTRCEsat 75 % ILD2 CTRCEsat 170 % ILQ2 CTRCEsat 170 % ILD5 CTRCEsat 100 % ILQ5 CTRCEsat 100 % ILD1 CTRCE 20 80 300 % ILQ1 CTRCE 20 80 300 % ILD2 CTRCE 100 200 500 % ILQ2 CTRCE 100 200 500 % ILD5 CTRCE 50 130 400 % ILQ5 CTRCE 50 130 400 % 3 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Isolation test voltage between emitter and detector VIO = 500 V, Tamb = 25 C Isolation resistance SYMBOL MIN. VISO 5300 MAX. UNIT VRMS 1012 RIO VIO = 500 V, Tamb = 100 C TYP. 1011 Climatic classification (according to IEC 68 part 1) 55/100/21 Comparative tracking index CTI 175 VIOTM 10 kV VIORM 890 V ISI 275 mA Power dissipation PSO 400 mW Safety temperature TSI 175 C Rated impulse voltage Maximum working voltage Recurring peak voltage Forward current Creepage distance Clearance distance Insulation distance per IEC 60950 2.10.5.1 7.0 mm 7.0 mm 0.4 mm Note * According to DIN EN 60747-5-2 (VDE 0884) (see figure 2). These optocouplers are suitable for "safety electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. VIOTM 450 t1, t2 t3 , t4 ttest tstres 400 Phototransistor PSO (mW) 350 300 250 Vpd 200 VIOWM VIORM IR-diode ISI (mA) 150 = 1 s to 10 s =1s = 10 s = 12 s 100 50 0 0 0 25 50 75 100 125 150 t3 ttest t4 175 TSI - Safety Temperature (C) 13930 t1 tTr = 60 s t2 t stres t Fig. 1 - Derating Diagram Rev. 1.8, 28-Jun-11 Fig. 2 - Test Pulse Diagram for Sample Test according to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5 4 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Current Delay Rise time Storage Fall time Propagation H to L Propagation L to H Rev. 1.8, 28-Jun-11 VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP VCE = 5 V, RL = 75 , 50 % of VPP ILD1 IF 20 ILQ1 IF 20 mA mA ILD2 IF 5 mA ILQ2 IF 5 mA ILD5 IF 10 mA ILQ5 IF 10 mA ILD1 tD 0.8 s ILQ1 tD 0.8 s ILD2 tD 1.7 s ILQ2 tD 1.7 s ILD5 tD 1.7 s ILQ5 tD 1.7 s ILD1 tr 1.9 s ILQ1 tr 1.9 s ILD2 tr 2.6 s ILQ2 tr 2.6 s ILD5 tr 2.6 s ILQ5 tr 2.6 s ILD1 ts 0.2 s ILQ1 ts 0.2 s ILD2 ts 0.4 s ILQ2 ts 0.4 s ILD5 ts 0.4 s ILQ5 ts 0.4 s ILD1 tf 1.4 s ILQ1 tf 1.4 s ILD2 tf 2.2 s ILQ2 tf 2.2 s ILD5 tf 2.2 s ILQ5 tf 2.2 s ILD1 tPHL 0.7 s ILQ1 tPHL 0.7 s ILD2 tPHL 1.2 s ILQ2 tPHL 1.2 s ILD5 tPHL 1.1 s ILQ5 tPHL 1.1 s ILD1 tPLH 1.4 s ILQ1 tPLH 1.4 s ILD2 tPLH 2.3 s ILQ2 tPLH 2.3 s ILD5 tPLH 2.5 s ILQ5 tPLH 2.5 s 5 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT SATURATED Current Delay Rise time Storage Fall time Propagation H to L Propagation L to H Rev. 1.8, 28-Jun-11 VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V VCE = 0.4 V, RL = 1 k, VCC = 5 V, VTH = 1.5 V ILD1 IF 20 ILQ1 IF 20 mA mA ILD2 IF 5 mA ILQ2 IF 5 mA ILD5 IF 10 mA ILQ5 IF 10 mA ILD1 tD 0.8 s ILQ1 tD 0.8 s ILD2 tD 1 s ILQ2 tD 1 s ILD5 tD 1.7 s ILQ5 tD 1.7 s ILD1 tr 1.2 s ILQ1 tr 1.2 s ILD2 tr 2 s ILQ2 tr 2 s ILD5 tr 7 s ILQ5 tr 7 s ILD1 ts 7.4 s ILQ1 ts 7.4 s ILD2 ts 5.4 s ILQ2 ts 5.4 s ILD5 ts 4.6 s ILQ5 ts 4.6 s ILD1 tf 7.6 s ILQ1 tf 7.6 s ILD2 tf 13.5 s ILQ2 tf 13.5 s s ILD5 tf 20 ILQ5 tf 20 s ILD1 tPHL 1.6 s ILQ1 tPHL 1.6 s ILD2 tPHL 5.4 s ILQ2 tPHL 5.4 s ILD5 tPHL 2.6 s ILQ5 tPHL 2.6 s ILD1 tPLH 8.6 s ILQ1 tPLH 8.6 s ILD2 tPLH 7.4 s ILQ2 tPLH 7.4 s ILD5 tPLH 7.2 s ILQ5 tPLH 7.2 s 6 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 C, unless otherwise specified) TEST CONDITION SYMBOL Common mode rejection, output high PARAMETER VCM = 50 VP-P, RL = 1 k IF = 0 mA CMH 5000 V/s Common mode rejection, output low VCM = 50 VP-P, RL = 1 k IF = 10 mA CML 5000 V/s CCM 0.01 pF Common mode coupling capacitance MIN. TYP. MAX. UNIT TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) VCC = 5 V f = 10 KHz, DF = 50 % VCC = 5 V RL I F = 10 mA f = 10 kHz, DF = 50 % VO IF = 10 mA VO RL = 75 iild1_03 iild1_01 Fig. 3 - Non-Saturated Switching Schematic Fig. 5 - Saturated Switching Schematic IF IF tD t PHL VO VO tPLH tS iild1_02 tD tR tR t PLH VTH = 1.5 V 50 % t PHL tF tS tF iild1_04 Fig. 4 - Non-Saturated Switching Timing Rev. 1.8, 28-Jun-11 Fig. 6 - Saturated Switching Timing 7 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors 1.5 1.3 TA = - 55 C 1.2 TA = 25 C 1.1 1.0 0.9 TA = 100 C 0.8 1 iild1_05 10 CTRce(sat) V = 0.4 V CE T = 70 C A NCTR 0.5 NCTR(SAT) 100 0.1 I F - Forward Current (mA) iild1_08 1.5 CTRce(sat)VCE = 0.4 V NCTR 0.5 NCTR (SAT) 1 10 VCE = 10 V, IF = 10 mA, TA = 25 C NCTR - Normalized CTR TA = 25 C CTRce(sat) VCE = 0.4 V 1.0 TA = 85 C NCTR 0.5 NCTR(SAT) 0.0 0.1 100 I F - LED Current (mA) 1 iild1_09 10 100 IF - LED Current (mA) Fig. 11 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 8 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.5 35 Normalized to: VCE =10V, IF = 10 mA,TA = 25 C ICE - Collector Current (mA) CTRNF - Normalized CTR Factor 100 Normalized to: VCE = 10 V,IF = 10 mA iild1_06 10 1.5 Normalized to: 0.0 0.1 1 IF - LED Current (mA) Fig. 10 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 7 - Normalized Non-Saturated and Saturated CTR vs. LED Current 1.0 A 1.0 0.0 0.7 0.1 CTRNF - Normalized CTR Factor Normalized to: V = 10 V, I = 10 mA CE F T = 25 C CTR - Normalized CTR Factor VF - Forward Voltage (V) 1.4 CTRce(sat) VCE = 0.4 V 1.0 TA = 50 C NCTR 0.5 NCTR (SAT) 0.0 0.1 iild1_07 1 10 25 50 C 20 15 70 C 25 C 85 C 10 5 0 100 0 I F - LED Current (mA) 10 iild1_10 20 30 40 50 60 I - LED Current (mA) F Fig. 12 - Collector Emitter Current vs. Temperature and LED Current Fig. 9 - Normalized Non-Saturated and Saturated CTR vs. LED Current Rev. 1.8, 28-Jun-11 30 8 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com tpLH - Propagation Low-High (s) 105 I CEO - Collector Emitter (nA) 104 103 102 Vce = 10 V 101 Typical 100 10- 1 10- 2 - 20 iild1_11 0 20 40 60 80 1000 2.5 TA = 25 C, IF = 10 mA Vcc = 5 V, Vth = 1.5 V tpHL 100 10 1.5 tpLH 1 0.1 100 Fig. 13 - Collector Emitter Leakage Current vs.Temperature 1 1.0 100 10 R L - Collector Load Resistor (k) iild1_12 TA - Ambient Temperature (C) 2.0 tpHL - Propagation High-Low (s) Vishay Semiconductors Fig. 14 - Propagation Delay vs. Collector Load Resistor PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 0.70 0.19 0.51 0.05 3.045 0.255 3 to 9 2.54 typ. 0.25 0.05 i178006 Rev. 1.8, 28-Jun-11 9 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Pin one ID 8 7 6 5 4 3 2 1 6.48 6.81 9 10 11 12 13 14 15 16 ISO method A 19.77 20.07 0.76 1.14 0.79 7.62 typ. 3.30 3.81 10 typ. 4 0.51 0.89 0.46 0.56 2.54 typ. 2.79 3.30 3 to 9 1.27 5.84 6.35 0.20 0.30 i178007 Option 6 Option 7 Option 9 10.36 9.96 7.62 typ. 9.53 10.03 7.8 7.4 7.62 ref. 0.7 4.6 4.1 0.102 0.249 8 min. 0.25 typ. 0.51 1.02 0.35 0.25 8.4 min. 15 max. 8 min. 10.16 10.92 10.3 max. 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.315 (8.00) min. 0.060 (1.52) 0.435 (11.05) 0.030 (0.76) R 0.010 (0.25) 0.100 (2.54) 0.070 (1.78) 0.315 (8.00) min. 0.060 (1.52) 0.435 (11.05) 18450-9 PACKAGE MARKING (example) ILD2 ILQ2 V YWW H 68 V YWW H 68 Notes * Only option 1 and 7 reflected in the package marking. * The VDE logo is only marked on option 1 parts. * Tape and reel suffix (T) is not part of the package marking. Rev. 1.8, 28-Jun-11 10 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000