Catalog 1307819 Revised 8-08 tycoelectronics.com 1307819-?M-LUG-FP-8-08 AMPMODU Interconnection System Tyco Electronics Corporation Harrisburg, PA AMPMODU Interconnection System AMPMODU Interconnection System Shunts .156 [3.96] Centerline .125 x .125 [3.18 x 3.18] Centerline .100 x .100 [2.54 x 2.54] Centerline AMPMODU 2mm Connectors .050 x .100 [1.27 x 2.54] Centerline .050 x .050 [1.27 x 1.27] Centerline PC/104 and PC/104Plus Connectors Table of Contents Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein ("Tyco Electronics") have made every reasonable effort to confirm the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics' only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their application. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. Please consult Tyco Electronics for the most current product information. The export of certain Tyco Electronics products is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S. Government. Buyer must comply with all applicable export laws of all applicable jurisdictions. (c) 2008 and 2004 Tyco Electronics Corporation. All Rights Reserved. AMP, ACTION PIN, AMP-LATCH, AMP-O-LECTRIC, AMP-O-MATIC, AMPLIMITE, AMPMODU, AMPOMATOR, CERTI-CRIMP, CHAMPOMATOR, PRO-CRIMPER, R-CAM, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation. Teflon(R) is a trademark of E.I. du Pont de Nemours and Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. 1 2 3 4 5 6 See inside back cover for Global Contacts and phone numbers. 7 and PC/104-Plus Connectors 1 PC/104Introduction .............................................................................................5 2 3 PC/104, Press Fit ....................................................................................6, 7 PC/104-Plus, Press Fit ..............................................................................8, 9 PC/104, Solder .......................................................................................10 PC/104-Plus, Solder .................................................................................11 Accessories, Kits ....................................................................................12 0.050 [1.27] x 0.050 [1.27] CENTERLINE AMPMODU 50/50 Grid Board-to-Board Vertical Receptacles and Headers: Introduction .......................................................................................13, 14 Vertical Receptacles, Double Row ...............................................................15 Vertical Headers, Double Row .....................................................................16 Recommended PC Board Layouts ...............................................................17 Board-to-Board Right-Angle Headers: Introduction .............................................................................................18 Right-Angle Headers, Double Row, Latching and Non-Latching ........................19 Cable-to-Board Connectors: Introduction .............................................................................................20 Receptacle Connectors, Double Row, With and Without Latch ...........................21 Cable Connector Terminating Cover, Double Row ..........................................22 IDC (Insulation Displacement Crimp) Tooling ................................................23 Performance Specifications ........................................................................24 Technical Documents .................................................................................24 .050 [1.27] x 0.100 [2.54] CENTERLINE AMPMODU System 50.......................................................................................25 Board-to-Board Connectors, Thru-Hole: Introduction .............................................................................................26 Headers, Shrouded and Unshrouded ......................................................27-35 Introduction .............................................................................................36 Receptacles .......................................................................................37-40 PC Board Hole Layouts ........................................................................41, 42 Board-to-Board Connectors, Surface-Mount: Introduction .............................................................................................43 Headers ................................................................................................44 Receptacles ..........................................................................................45 Cable-to-Board Connectors, FFC Cable: Introduction .............................................................................................46 Flexible Flat Conductor Cable .....................................................................47 FFC Contacts ..........................................................................................48 Receptacle Housings ...........................................................................49-52 ZIF-Line Connectors ...........................................................................53, 54 Cable-to-Board Connectors, Ribbon Cable: Introduction .............................................................................................55 Ribbon Cable Receptacles ........................................................................56 Paddleboard Receptacles ........................................................................57 Flat Ribbon Cable ..............................................................................58, 59 Application Tooling for Flex Film Contacts ......................................................60 Application Tooling .................................................................................60-62 Performance Specifications ........................................................................63 Technical Documents .................................................................................64 8 2 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Table of Contents (Continued) 1 2 3 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Shunts 8 .156 [3.96] Centerline 7 .125 x .125 [3.18 x 3.18] Centerline 6 .100 x .100 [2.54 x 2.54] Centerline 5 AMPMODU 2mm Connectors 4 .050 x .100 [1.27 x 2.54] Centerline 3 .050 x .050 [1.27 x 1.27] Centerline 5 Headers, Unshrouded, Double Row, Thru-Hole Mount ....................................66, 67 Breakaway Headers, Unshrouded, Double Row, Thru-Hole Mount .....................68-70 Breakaway Headers, Unshrouded, Double Row, Surface Mount ........................71, 72 Stacking Header, Unshrouded, Double Row, Thru-Hole Mount ..............................73 Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount .....................74, 75 Headers, Shrouded, Double Row, Surface Mount ..........................................76, 77 Headers, Shrouded, Double Row, Thru-Hole Mount with Cable Shrouds ............78, 79 Receptacles, Double Row, Thru-Hole, Vertical Mount.......................................80, 81 Receptacles, Double Row, Surface Mount, Right-Angle Mount ..............................82 Receptacles, Double Row, Thru-Hole, Right-Angle Mount ....................................83 Receptacles, Double Row, Surface Mount, Vertical Mount ....................................84 .100 [2.54] x .100 [2.54] CENTERLINE Introduction ..........................................................................................85-87 Terms Explained ..........................................................................................87 Wire Sizes...................................................................................................88 Contact Platings ..........................................................................................88 Mating Post Lengths ....................................................................................88 Application Tooling ....................................................................................88 Board-to-Board Solutions Guides, .100[2.54] Centerline Products .....................89 Wire-to-Board Solutions Guide, .100[2.54] Centerline Products ........................89 Mating Post Selection Guide ........................................................................90 Parallel Stacking Guide for Board-to-Board Applications .................................91 Board-to-Board Products: Unshrouded Headers ........................................................................92-100 Breakaway and Retention Headers-Unshrouded ....................................101-105 Reeled Breakaway Headers ...............................................................106, 107 Surface Mount Breakaway Headers ......................................................108-110 Unshrouded Stacking Headers- Breakaway ..........................................111-113 Shrouded Headers ...........................................................................114-140 Standard Profile ..............................................................................114-133 Low Profile ....................................................................................134-140 Shrouded Stacking Headers ...............................................................141-144 ACTION PIN Headers ........................................................................145-149 ACTION PIN Press-Fit Posts ...............................................................150, 151 Application Tooling for ACTION PIN Posts ..........................................152, 153 ACTION PIN Stacking Connectors ......................................................154-161 Application Tooling for AMP ACTION PIN Stacking Connectors .....................162 0.025 [0.64] Square Posts ........................................................................163 0.025 [0.64] Square Continuous Posts...................................................164, 165 0.045 [1.14] Square Continuous Posts...................................................166, 167 Horizontal Mount Receptacle Assemblies, Mod II ....................................168-173 Vertical Mount Receptacle Assemblies, Mod II & Mod IV ...........................174-184 Surface Mount Vertical Receptacles, Mod IV ..........................................185-192 Two-Piece Printed Circuit Board Connectors ..........................................193-202 Accessories ....................................................................................203-205 Wire-to-Board Products: Locking Clip Contacts and Housings ...................................................206-209 Mod IV Contacts and Housings ............................................................210-220 Short Point Contacts and Housings ......................................................221-224 MTE Interconnection System ...............................................................225-250 Surface Mount MTE Headers (Right-Angle & Vertical) ...........................251, 252 Interchangeable Contacts, Wire Crimp (Snap-In) .................................253, 254 MT and Shielded MT Connectors .........................................................255-265 Mini-Tandem Spring Receptacle Contacts .............................................266-269 Application Tooling ..............................................................................270-275 Technical Documents ...........................................................................276-278 PC/104 and PC/104Plus Connectors 2mm Connectors 4 AMPMODU AMPMODU 2mm Connectors (Board to Board) ...................................................65 AMPMODU Interconnection System Shunts .156 [3.96] Centerline .125 x .125 [3.18 x 3.18] Centerline .100 x .100 [2.54 x 2.54] Centerline AMPMODU 2mm Connectors .050 x .100 [1.27 x 2.54] Centerline .050 x .050 [1.27 x 1.27] Centerline PC/104 and PC/104Plus Connectors Table of Contents (Continued) [3.18] x .125 [3.18] CENTERLINE 6 .125Wire-to-Board Product: 7 1 2 3 8 Level V IDC Connectors .....................................................................279-282 .156 [3.96] CENTERLINE Mod I 0.031 x 0.062 Interconnection System Introduction ....................................................................................283, 284 Receptacles, Vertical and Horizontal Board Mount .................................285, 286 Receptacle Assemblies, Vertical and Horizontal Board Mount .....................287-289 Receptacles, Crimp Snap-In (Wire Applied) ................................................290 Receptacle Housings, Standard Profile-Unkeyed (With/Without Strain Relief) ...291, 292 Receptacle Housings, Low Profile-Keyed ...................................................293 Posts, Machined Applied ........................................................................294 Headers: Straight Post, Keyed .....................................................................295, 296 Right-Angle, Keyed ..............................................................................297 Locking Clip Contacts, Crimp Snap-In (Wire Applied) ....................................298 Locking Clip Connector Housings, Single Row, Crimp Snap-In ........................299 Application Tooling ........................................................................300-304 Performance Specifications ..................................................................305 Technical Documents ...........................................................................305 Shunts Dual In-Line Package DIP Shunts .........................................................306, 307 Post Shunts ....................................................................................308-310 Performance Specifications ..................................................................311 Technical Documents ...........................................................................311 Part Number Index ....................................................................................313-316 4 5 Restriction on the use of Hazardous Substances (RoHS) 6 At Tyco Electronics, we're ready to support your RoHS requirements. We've assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: RoHS Compliant -- Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly "Out of Scope" of the RoHS Directive such as hand tools and other non-electrical accessories. NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced at right. 7 8 Getting the Information You Need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: Cross-Reference from Non-compliant to Compliant Products Ability to browse RoHS Compliant Products in our on-line catalog Downloadable Technical Data Customer Information Presentation More detailed information regarding the definitions used above So whatever your questions when it comes to RoHS, we have the answers at www.tycoelectronics.com/leadfree RoHS Customer Support Center 4 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104 and PC/104-Plus Connectors Product Facts Press fit design -- eliminates hand soldering Unitized PC/104 connector assembly -- eliminates two piece (64 pin & 40 pin) configuration Integral board spacers with captive hardware -- eases & improves assembly efficiency while minimizing stocked hardware "Flat-rock" insertable -- no need for complex insertion tooling Recognized by Underwriters' Laboratories to US and Canadian standards file No. E28476 Fully compliant with PC104 & PC104-Plus standards Solutions available for lead free processes (ie. ENIG and silver immersion plated PCB's) 1 The PC/104 and PC/104-Plus connectors are industry standard product offerings which comply with the interconnection requirements defined by the PC/104 organization (http://www.pc104.org) Both products are designed specifically for "flat-rock" press-fit installation for ease of application. Solder version is also available. Optional integral standoffs minimize the customer's system assembly time. The Tyco Electronics offering of the standard PC/104 product is a unitized connector rather than the two piece, 40 and 64 position connectors currently on the market. Customer needs to stock and apply only one part number rather than two. Performance Specifications Need more information? Electrical Characteristics Call Technical Support 1-800-522-6752: Meets requirements of PC/104 and PC/104-Plus standards Nominal Resistance -- 10 milliohms maximum, R Insulation Resistance -- 1000 megohms minimum Dielectric Withstanding Voltage -- 500 VAC for 1 min. at sea level Mechanical Characteristics Meets requirements of PC/104 and PC/104-Plus standards Current -- Signal application only Temperature -- -55 to 105C Material and Finish Housing -- Black Thermoplastic, UL 94V-0 Contact -- Phosphor Bronze, Full Gold all over Nickel (stackthrough), Gold on mating end, Tin or Tin-lead on PCB tail all over Nickel (non-stackthrough) Connector PC/104 Technical Documents Product Specifications 108-1956 Technical Support is staffed with specialists well versed in all Tyco Electronics products. The Center can provide you with: Technical Support Catalogs Technical Documents Tyco Electronics Authorized Distributor Locations PC/104-Plus Centerline .100 2.54 .079 2.0 Position 104* 120** *Two circuits plugged per PC/104 specification. Other options available. **One circuit plugged per PC/104-Plus specification. Other options available. Application Specifications 114-13021 5 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104, Press-Fit Material and Finish Housing -- Glass filled thermoplastic, Black, 94V-0 rated Contacts 1 Stackthrough -- Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000005 [0.000130] min. Gold on remainder, all over .000050 [0.00127] Nickel or Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000100-.000200 [0.000254-.00508] matte tin on compliant section, .000005 {0.000130] min. Gold on remainder of post, all over .000050 [0.00127] Nickel Non-Stackthrough -- Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000100 [0.00254] matte tin or tin-lead on remainder, all over .000050 [0.00127] Nickel Screwlocks -- Steel, Clear Chromate over Zinc Stackthrough, No Standoffs Non-Stackthrough, No Standoffs Gold plated contacts* Part No. 1375795-1 (keyed), Part No. 1375795-2 (unkeyed) Gold plated contacts with Tin plated compliant pin section** Part No. 1375795-3 (keyed), Part No. 1375795-4 (unkeyed) Tin-lead plated tails* Part No. 1375796-1 (keyed), Part No. 1375796-2 (unkeyed) Matte tin plated tails** Part No. 1375796-3 (keyed), Part No. 1375796-4 (unkeyed) .435 [11.05] .100 Typ. [2.54] .025 Sq. [0.64] Typ. 3.21 [81.60] Plugged Circuit .100 Typ. [2.54] .100 Typ. [2.54] .483.013 [12.270.34] Typ. .195 [4.95] Typ. .390 [9.90] 2.01 [51.11] .435 [11.05] 3.21 [81.60] .119.013 [3.030.34] Typ. .195 [4.95] Typ. .390 [9.90] 2.01 [51.11] Plugged Circuit .100 Typ. [2.54] Plugged Circuit Plugged Circuit 3.10 [78.74] 3.10 [78.74] .300 [7.62] Keyed .300 [7.62] Unkeyed Recommended PC Board Layout See Customer Drawing for Hole Geometry and Recommended Plating. Note: All part numbers are RoHS compliant. * For RoHS exempt Tin-lead processes (including ENIG Plated PCB's) ** for Silver Immersion processes or where a total lead free solution is desired 6 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104, Press-Fit (Continued) Stackthrough, 2 Standoffs Non-Stackthrough, 2 Standoffs Gold plated contacts* Part No. 1375793-1 (keyed), Part No. 1375793-2 (unkeyed) Tin-lead plated tails* Part No. 1375794-1 (keyed), Part No. 1375794-2 (unkeyed) Gold plated contacts with Tin plated compliant pin section** Part No. 1375793-3 (keyed), Part No. 1375793-4 (unkeyed) Matte tin plated tails** Part No. 1375794-3 (keyed), Part No. 1375794-4 (unkeyed) .435 [11.05] .600 Typ. [15.24] .100 Typ. [2.54] .025 Sq. [0.64] Typ. 3.21 [81.60] .600 Typ. [15.24] .100 Typ. [2.54] .4830.13 [12.270.34] Typ. .195 [4.95] Typ. .390 [9.90] 2.01 [51.11] Plugged Circuit .100 [2.54] Typ. 1 .435 [11.05] 3.21 [81.60] .119.013 [3.030.34] Typ. .195 [4.95] Typ. .390 [9.90] 2.01 [51.11] Plugged Circuit .100 [2.54] Typ. Plugged Circuit Plugged Circuit Stackthrough, 4 Standoffs Non-Stackthrough, 4 Standoffs Gold plated contacts* Part No. 1375791-1 (keyed), Part No. 1375791-2 (unkeyed) Tin-lead plated tails* Part No. 1375792-1 (keyed), Part No. 1375792-2 (unkeyed) Gold plated contacts with Tin plated compliant pin section** Part No. 1375791-3 (keyed), Part No. 1375791-4 (unkeyed) Matte tin plated tails** Part No. 1375792-3 (keyed), Part No. 1375792-4 (unkeyed) .435 [11.05] .435 [11.05] .600 Typ. [15.24] .100 Typ. [2.54] .025 Sq. [0.64] Typ. 2.01 [51.11] .119.013 [3.030.34] Typ. .195 [4.95] Typ. .390 3.21 [81.60] 2.01 [51.11] Plugged Circuit .100 Typ. [2.54] [9.90] [9.90] Breakaway Standoffs 0.05 [1.27] .100 Typ. [2.54] .483.013 [12.270.34] Typ. .195 [4.95] Typ. .390 3.21 [81.60] Plugged Circuit .100 Typ. [2.54] .600 Typ. [15.24] Breakaway Standoffs Plugged Circuit 3.10 [78.74] .300 [7.62] .125 Dia. [3.18] 2 Plcs. 0.05 [1.27] 3.10 [78.74] Plugged Circuit .300 [7.62] .125 Dia. [3.18] 2 Plcs. Keyed Unkeyed Recommended PC Board Layout See Customer Drawing for Hole Geometry and Recommended Plating. Note: All part numbers are RoHS compliant. * For RoHS exempt Tin-lead processes (including ENIG Plated PCB's) ** for Silver Immersion processes or where a total lead free solution is desired 7 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104-Plus, Press-Fit Material and Finish Housing -- Glass filled thermoplastic, Black, 94V-0 rated Contacts 1 Stackthrough -- Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000005 [0.000130] min. Gold on remainder, all over .000050 [0.00127] Nickel or Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000100-.000200 [0.000254-.00508] matte tin on compliant section, .000005 {0.000130] min. Gold on remainder of post, all over .000050 [0.00127] Nickel Non-Stackthrough -- Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000100 [0.00254] matte tin or tin-lead on remainder, all over .000050 [0.00127] Nickel Screwlocks -- Steel, Clear Chromate over Zinc Stackthrough, No Standoffs Non-Stackthrough, No Standoffs Gold plated contacts* Part No. 1375799-1 (unkeyed) Part No. 1375799-2 (keyed-A1) per PC/104-Plus specification Part No. 1375799-3 (keyed-D30) per PC/104-Plus specification Tin-lead plated tails* Part No. 1375800-1 (unkeyed) Part No. 1375800-2 (keyed-A1) per PC/104-Plus specification Part No. 1375800-3 (keyed-D30) per PC/104-Plus specification Gold plated contacts with Tin plated compliant pin section** Part No. 1375799-4 (unkeyed) Part No. 1375799-5 (keyed-A1) per PC/104-Plus specification Part No. 1375799-6 (keyed-D30) per PC/104-Plus specification Matte tin plated tails** Part No. 1375800-4 (unkeyed) Part No. 1375800-5 (keyed-A1) per PC/104-Plus specification Part No. 1375800-6 (keyed-D30) per PC/104-Plus specification .368 [9.35] .368 [9.35] .079 Typ. [2.00] .079 Typ. [2.00] .020 Sq. [0.51] Typ. Plugged Circuit (-3 or -6 only) Plugged Circuit (-2 or -5 only) 2.37 [60.30] Plugged Circuit (-3 or -6 only) .315 [8.00] Plugged Circuit (-2 or -5 only) .015 [0.39] .315 [8.00] .236 [6.00] 2.28 [58.0] 2.28 [58.0] Recommended PC Board Layout for 1375799-1, 1375799-4, 1375800-1, 1375800-4 .112.013 [2.850.34] Typ. .015 [0.39] 2.37 [60.30] .236 [6.00] .236 [6.00] .079 Typ. [2.00] .079 Typ. [2.00] .483.013 [12.270.34] Typ. 2.28 [58.0] Recommended PC Board Layout for 1375799-2, 1375799-5, 1375800-2, 1375800-5 Recommended PC Board Layout for 1375799-3, 1375799-6, 1375800-3, 1375800-6 See Customer Drawing for Hole Geometry and Recommended Plating. (Including ENIG plated PCB's) Note: All part numbers are RoHS compliant. * For RoHS exempt Tin-lead processes (including ENIG Plated PCB's) ** for Silver Immersion processes or where a total lead free solution is desired 8 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104-Plus, Press-Fit (Continued) Non-Stackthrough, 2 Standoffs .368 [9.35] Tin-lead plated tails* Part No. 1375798-1 (unkeyed) Part No. 1375798-2 (keyed-A1) .600 Typ. [15.24] per PC/104-Plus specification Part No. 1375798-3 (keyed-D30) 0.79 Typ. [2.00] per PC/104-Plus specification Matte tin plated tails** Part No. 1375798-4 (unkeyed), Part No. 1375798-5 (keyed-A1) .112.013 Typ. [2.850.34] Plugged Circuit (-3 and -6 only) per PC/104-Plus specification 1 0.79 Typ. [2.00] .315 [8.00] Part No. 1375798-6 (keyed-D30) per PC/104-Plus specification Plugged Circuit (-2 and -5 only) 2.37 [60.30] .015 [0.39] Stackthrough, 2 Standoffs Gold plated contacts* Part No. 1375797-1 (unkeyed) Part No. 1375797-2 (keyed-A1) .600 Typ. [15.24] per PC/104-Plus specification Part No. 1375797-3 (keyed-D30) .368 [9.35] per PC/104-Plus specification 0.79 Typ. [2.00] .020 Sq. [0.51] Typ. Gold plated contacts with Tin plated compliant pin section** Part No. 1375797-4 (unkeyed) Part No. 1375797-5 (keyed-A1) per PC/104-Plus specification .079 Typ. [2.00] Plugged Circuit (-3 and -6 only) Part No. 1375797-6 (keyed-D30) per PC/104-Plus specification Plugged Circuit (-2 and -5 only) 2.37 [60.30] .483.013 Typ. [12.270.34] .315 [8.00] .015 [0.39] Recommended PC Board Layout for 1375797-1, 1375797-4, 1375798-1, 1375798-4 Recommended PC Board Layout for 1375797-2, 1375797-5, 1375798-2, 1375798-5 Recommended PC Board Layout for 1375797-3, 1375797-6, 1375798-3, 1375798-6 See Customer Drawing for Hole Geometry and Recommended Plating. Note: All part numbers are RoHS compliant. * For RoHS exempt Tin-lead processes (including ENIG Plated PCB's) ** for Silver Immersion processes or where a total lead free solution is desired 9 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104, Solder 1 Material and Finish Non-Stackthrough, No Standoffs Housing -- Glass filled thermoplastic, Black, 94V-0 rated Contacts Part No. 1375963-3 (keyed) Part No. 1375963-4 (unkeyed) .435 [11.05] .100 Typ. [2.54] .100 Typ. [2.54] Non-Stackthrough -- Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000100 [0.00254] matte tin on remainder, all over .000050 [0.00127] Nickel 3.21 [81.60] 2.01 [51.11] Plugged Circuit Screwlocks -- Steel, Clear Chromate over Zinc .195 [4.95] Typ. .390 [9.90] .119.013 [3.030.34] Typ. Plugged Circuit 3.10 [78.74] 3.10 [78.74] .300 [7.62] .300 [7.62] Plated Through Hole .041.003 Dia. [1.030.08] 102 Plcs. Keyed Unkeyed Recommended PC Board Layout Non-Stackthrough, 2 Standoffs Non-Stackthrough, 4 Standoffs Part No. 1375961-3 (keyed) Part No. 1375961-4 (unkeyed) Part No. 1375959-3 (keyed) Part No. 1375959-4 (unkeyed) .435 [11.05] .435 [11.05] .600 Typ. [15.24] .600 Typ. [15.24] .100 Typ. [2.54] .100 [2.54] Typ. 3.21 [81.60] .195 [4.95] Typ. .390 [9.90] 2.01 [51.11] Plugged Circuit .100 Typ. [2.54] .119.013 [3.030.34] Typ. 3.21 [81.60] 2.01 [51.11] Plugged Circuit Plugged Circuit 0.05 [1.27] 3.10 [78.74] .125 Dia. [3.18] 2 Plcs. Breakaway Standoffs .300 [7.62] 0.05 [1.27] 3.10 [78.74] .100 Typ. [2.54] .119.013 [3.030.34] Typ. .195 [4.95] Typ. .390 [9.90] Plugged Circuit .300 [7.62] .125 Dia. [3.18] 2 Plcs. Plated Through Hole .040.003 Dia. [1.010.08] 102 Plcs. Unkeyed Keyed Recommended PC Board Layout Note: All part numbers are RoHS compliant. 10 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System PC/104-Plus, Solder Material and Finish Non-Stackthrough, No Standoffs Housing -- Glass filled thermoplastic, Black, 94V-0 rated Contacts Part No. 1375967-4 (unkeyed) Part No. 1375967-5 (keyed-A1) per PC/104-Plus specification Part No. 1375967-6 (keyed-D30) per PC/104-Plus specification Non-Stackthrough -- Phosphor Bronze; plated .000015 [0.00038] min. Gold on mating receptacle end, .000100 [0.00254] matte tin on remainder, all over .000050 [0.00127] Nickel Screwlocks -- Steel, Clear Chromate over Zinc .079 Typ. [2.00] .079 Typ. [2.00] Plugged Circuit (-6 only) Plugged Circuit (-5 only) Plated Through Hole .035.003 Dia. [0.880.08] 120 Plcs. .236 [6.00] .236 [6.00] 1 .368 [9.35] .112.013 [2.850.34] Typ. .315 [8.00] .015 [0.39] 2.37 [60.30] Plated Through Hole .035.003 Dia. [0.880.08] 119 Plcs. Plated Through Hole .035.003 Dia. [0.880.08] 119 Plcs. .236 [6.00] 2.28 [58.0] 2.28 [58.0] Recommended PC Board Layout for 1375967-4 2.28 [58.0] Recommended PC Board Layout for 1375967-5 Recommended PC Board Layout for 1375967-6 .368 [9.35] Non-Stackthrough, 2 Standoffs Part No. 1375965-4 (unkeyed) Part No. 1375965-5 (keyed-A1) per PC/104-Plus specification Part No. 1375965-6 (keyed-D30) per PC/104-Plus specification .600 Typ. [15.24] .079 Typ. [2.00] .112.013 Typ. [2.850.34] Plugged Circuit (-6 only) Plugged Circuit (-5 only) 2.37 [60.30] 0.79 Typ. [2.00] .315 [8.00] .015 [0.39] Plated Through Hole .035.003 Dia. [0.880.08] 119 Plcs. Recommended PC Board Layout for 1375965-4 Recommended PC Board Layout for 1375965-5 Plated Through Hole .035.003 Dia. [0.880.08] 119 Plcs. Note: All part numbers are RoHS compliant. Recommended PC Board Layout for 1375965-6 11 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 PC/104 and PC/104-Plus Connectors AMPMODU Interconnection System Accessories 2.53 0.10 [64.36 0.25] Shroud, PC/104-Plus Part No. 1375801-1 2.45 [62.34] .450 .010 [11.43 0.25] Material -- PBT, Black 1 .440 .003 [11.18 0.08] .370 [9.41] .039 Typ. [1.00] .079 Typ. [2.00] .255 Typ. [6.47] .333 [8.46] 2.39 [60.76] Organizer, PC/104 3.21 [81.60] .195 [4.95] Typ. Part Number 1445251-1 .05 [1.27] Typ. Material -- Polyester, PBT, Black .10 [2.54] Typ. .10 [2.54] Typ. .390 [9.90] .05 [1.27] Typ. 2.01 [51.11] Kit Packaging Part Numbers Component Part Number Connector Assembly Organizer 1375795-3 1445251-1 1375795-4 1445251-1 1375793-3 1445251-1 1375793-4 1445251-1 1375791-3 1445251-1 1375791-4 1445251-1 Part Number 1445441-3 1445441-4 1445440-3 1445440-4 1445439-3 1445439-4 Keyed Circuits Part No. 1445441-3 Keyed Circuits Part No. 1445440-3 Style Keyed Unkeyed Keyed Unkeyed Keyed Unkeyed Keyed Circuits Part No. 1445439-3 Note: All part numbers are RoHS compliant. 12 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System AMPMODU 50/50 Grid Connector System Board-to-Board Vertical Receptacles and Headers Right-Angle Headers, Board-to-Board (Page 19) Vertical Headers, Board-to-Board (Page 16) Receptacles, Cable-to-Board, With Latch (Page 21) 2 Vertical Receptacles, Board-to-Board (Page 15) Receptacles, Cable-to-Board Without Latch (Page 21) Vertical Headers, Board-to-Board (Page 16) Vertical Headers, Board-to-Board (Page 16): .250 [6.35] Stack Height .320 [8.13] Stack Height .390 [9.91] Stack Height Vertical Receptacles, Board-to-Board (Page 15) Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request. ISO900e1d i rtif Ce 13 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Vertical Receptacles and Headers Board-to-Board Vertical Receptacles and Headers Product Facts Surface-mount products for parallel board-to-board applications, as well as right-angle board-to-board and cable-to-board applications High density .050 x .050 [1.27x1.27] centerline grid Three board-to-board stack heights: .250 [6.35], .320 [8.13] and .390 [9.91] Non-protrusive metallic holddowns Reliable dual beam receptacle contacts for redundant contact Duplex plated receptacle and post contacts; gold plated on mating areas, tin plated on tails Compatible with standard surface-mount processing (VPR and IR) Receptacle and header allow for drainage of processing fluids Tape and reel packaging available. Contact Tyco Electronics for details Polarized header and receptacle assemblies Sizes of 10, 20, 30, 40, 50, 60, 70, 80 and 100 positions Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association File No. LR7189 2 R R AMPMODU 50/50 Grid Vertical Headers and Receptacles are designed for parallel board-to-board stacking in high density applications. Right-angle board-to-board and cable-to-board applications are also possible, since the vertical receptacles also mate with non-latching right-angle headers (page 19) and the vertical headers also mate with non-latching cable connectors. Available are double row, vertical shrouded headers and receptacles in sizes ranging from 10 through 100 positions (in 10 position increments). Parallel board-to-board stack heights of .250 [6.35], .320 [8.13] and .390 [9.91] are achievable by selection of the appropriate header. The receptacle is the same for all three stack height headers. PC boards and allow surface mounting to both sides of the board. In addition to providing retention during processing, the holddowns are soldered during reflow and therefore provide long-term strain relief for the solder joints. and packaging methods result in a system that is compatible with robotic assembly. AMPMODU 50/50 Grid Vertical Headers and Receptacles are designed to be compatible with standard surface-mount processes; IR (infrared) and VPR (vapor phase reflow). The surface-mount connectors have been designed so that dimensioning, tolerances, referenced datums, holddown characteristics Three Board Stack Heights The headers and receptacles feature polarization to prevent misalignment. .250.006 [6.350.15] .320.006 [8.130.15] Non-Protrusive Metallic Holddowns .390.006 [9.910.15] Non-protrusive metallic holddowns are designed for use in .062 [1.57] or thicker 14 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Vertical Receptacles, Double Row, .050 x .050 [1.27 x 1.27] Centerline Vertical Receptacles, Double Row A .120 [3.05] .028 [0.71] Material and Finish .050 [1.27] Housing--Glass-filled thermoplastic, black, 94V-0 rated Contacts--Copper alloy; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown--Copper alloy; plated .000150 [0.00381] tin over .000050 [0.00127] nickel 2 Polarizing Tab (For Polarization to Mating Header) .187 [4.75] .050 [1.27] .050 [1.27] Related Product Data Mating Headers -- pages 16, 19 PC Board Layouts -- page 17 Performance Specifications -- page 24 Technical Documents -- page 24 Product Specification 108-1332 Application Specification 114-7010 Packaging: Tube or Tape and Reel No. of Pos. Dimension A 10 20 30 40 50 60 70 80 100 .266 [6.75] .516 [13.11] .766 [19.46] 1.016 [25.81] 1.266 [32.16] 1.516 [38.51] 1.766 [44.86] 2.016 [51.21] 2.516 [63.91] Tube 5-104652-1 5-104652-2 5-104652-3 5-104652-4 5-104652-5 5-104652-6 5-104652-7 5-104652-8 6-104652-0 Receptacle Part Numbers Tape and Reel* No Hold Down w/Vacuum Cover 5-147384-1 5-147413-1 5-147384-2 5-147413-3 5-147384-3 5-147413-4 5-147384-4 -- 5-147384-5 5-147413-2 5-147384-6 -- 5-147384-7 -- 5-147384-8 -- 5-147384-9 -- * Parts packaged in tape and reel have vacuum pick and place cover. See PC Board Layout on page 17. Note: All part numbers are RoHS compliant. 15 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline Vertical Headers, Double Row .050 [1.27] .225 [5.71] .050 [1.27] For .250 [6.35] Mated Height A .2255 [5.728] 2 .030 [0.76] .050 [1.27] A For .320 [8.13] Mated Height .2975 [7.557] .030 [0.76] .050 [1.27] .030 [0.76] .050 [1.27] A .3675 [9.335] For .390 [9.91] Mated Height Material and Finish Related Product Data Technical Documents -- page 24 Housing--Glass-filled thermoplastic, black, 94V-0 rated Contacts--Copper alloy; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown--Copper alloy; plated .000150 [0.00381] tin over .000050 [0.00127] nickel Mating Receptacles -- page 15, 21 (without latch only) PC Board Layouts -- page 17 Performance Specifications -- page 24 Product Specification 108-1332 Application Specification 114-7010 Packaging: Tube or Tape and Reel No. of Pos. 10 20 30 40 50 60 70 80 90 100 Dimension A .372 [9.44] .622 [15.79] .872 [22.14] 1.122 [28.49] 1.372 [34.84] 1.622 [41.19] 1.872 [47.54] 2.122 [53.89] 2.372 [60.24] 2.622 [66.59] .250 [6.35] Mated Height Tape & Reel* Tubes Hold Down No Hold Down 5-104655-1 5-147381-1 5-147121-1 5-104655-3 5-147381-2 5-147121-2 5-104655-4 5-147381-3 -- 5-104655-5 5-147381-4 -- 5-104655-6 5-147381-5 -- 5-104655-7 5-147381-6 -- 5-104655-8 5-147381-7 -- 5-104655-9 5-147381-8 -- -- -- -- 6-104655-1 5-147381-9 -- Header Part Numbers .320 [8.13] Mated Height Tubes Tape & Reel* 5-104656-1 5-104656-2 5-104656-3 5-104656-4 5-104656-5 5-104656-6 5-104656-7 5-104656-8 5-104656-9 6-104656-0 5-147382-1 5-147382-2 5-147382-3 5-147382-4 5-147382-5 5-147382-6 5-147382-7 5-147382-8 -- 5-147382-9 .390 [9.91] Mated Height Tubes Tape & Reel* Hold Down No Hold Down 5-104693-1 -- 5-147383-1 5-104693-2 -- 5-147383-2 5-104693-3 -- 5-147383-3 5-104693-4 -- 5-147383-4 5-104693-5 -- 5-147383-5 5-104693-6 -- 5-147383-6 5-104693-7 -- 5-147383-7 5-104693-8 -- 5-147383-8 5-104693-9 -- -- 6-104693-0 5-147503-1 5-147383-9 *Parts packaged in tape and reel have vacuum pick and place cover. See PC Board Layout on page 17. Note: All part numbers are RoHS compliant. 16 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Recommended PC Board Layouts for Vertical Connectors Headers Recommended PC Board Layouts .029 [0.74] .050 [1.27] B Spaces at .050 [1.27] = C .162 [4.11] .010 [0.25] 4 Plc. C L of Pattern 2 Detail A .182 [4.62] .091 [2.31] .047 [1.19] 2 Plc. .061 [1.54] Detail A D Receptacles .029 [0.74] .050 [1.27] .110 [2.79] B Spaces at .050 [1.27] = C C L of Pattern .130 [3.30] .065 [1.65] Detail A .060 [1.52] D Note: Refer to Tyco Electronics Customer Drawings for additional PC board layout information and dimensional tolerances. No. of Pos. B 10 20 30 40 50 60 70 80 90 100 4 9 14 19 24 29 34 39 44 49 Receptacle Dimensions C D .200 [5.08] .450 [11.43] .700 [17.78] .950 [24.13] 1.200 [30.48] 1.450 [36.83] 1.700 [43.18] 1.950 [49.53] 2.200 [55.88] 2.450 [62.23] .320 [8.12] .570 [14.48] .820 [20.83] 1.070 [27.19] 1.320 [33.53] 1.570 [39.88] 1.820 [46.23] 2.070 [52.58] 2.320 [58.93] 2.570 [65.28] B 4 9 14 19 24 29 34 39 44 49 Header Dimensions C .200 [5.08] .450 [11.43] .700 [17.78] .950 [24.13] 1.200 [30.48] 1.450 [36.83] 1.700 [43.18] 1.950 [49.53] 2.200 [55.88] 2.450 [62.23] D .322 [8.17] .572 [14.52] .822 [20.87] 1.072 [27.22] 1.322 [33.57] 1.572 [39.92] 1.822 [46.27] 2.072 [52.62] 2.322 [58.97] 2.572 [65.32] Note: All part numbers are RoHS compliant. 17 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Right-Angle Headers Product Facts products for right-angle board-to-board and cable-to-board applications Double-row, right-angle shrouded headers High density .050 x .050 [1.27 x 1.27] centerline grid Latching and non-latching versions available Non-protrusive metallic holddowns Metallic tabs, when soldered to PC board pad, provide added mechanical support Duplex plated post contacts; gold plated on mating area, tin plated on tails Compatible with standard surface-mount processing (VPR and IR) Standoffs on header housings allow for drainage of processing fluids All headers are polarized Sizes of 10, 20, 30, 40, 50, 60, 70, 80 and 100 positions Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association File No. LR7189 Board-to-Board Right-Angle Headers Surface-mount 2 R R AMPMODU 50/50 Grid Right-Angle Headers will accommodate a variety of high density packaging applications; right-angle board-to-board applications when mated with vertical receptacles (page 15) and right-angle cable-to-board applications when mated with cable connectors (page 21). The small .050 x .050 [1.27 x 1.27] centerline contact spacing allows efficient use of the PC board area. Mechanical support of the headers to the PC board is provided by non-protrusive metallic holddowns designed for .062 [1.57] or thicker PC boards. These holddowns are of the same design as those used in the vertical headers (page 16) and receptacles (page 15). There are also metallic tabs that are soldered to the surfaces of the PC board pads for added support. AMPMODU 50/50 Grid Right-Angle Headers are available in double-row, in either latching or nonlatching versions, and in sizes ranging from 10 through 100 positions (in 10 position increments). The latching version provides positive retention when mated with the latching cable connector (page 21). All headers feature polarization to help prevent misalignment during mating. 18 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline Right-Angle Headers, Double Row, Latching and Non-Latching Non-Latching Header A .050 [1.27] Typ. .050 [1.27] .213 [5.41] Latching Header .352 [8.94] 2 .050 [1.27] .430 [10.92] .029 [0.74] Typ Material and Finish .065 [1.65] Typ. Housing -- Liquid crystal polymer, black, 94V-0 rated Contacts -- Copper alloy; duplex plated .000030 [0.00076] gold in mating area, .000150 [0.000381] tin on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown -- Copper alloy; plated .0000150 [0.00381] tin over .000050 [0.00127] nickel B Spaces at .025 = C [0.64] .140 [3.56] .085 [2.16] .340 [8.64] .175 [4.45] .100 [2.54] Min Related Product Data Mating Receptacles -- page 15, 21 Performance Specifications -- page 24 Technical Documents -- page 24 Product Specification 108-1443 Application Specification 114-7010 Packaging: Tube .047 Dia [1.19] Plated-Thru Hole (2 Plc) .305 [7.75] .063 [1.57] (2 Plc) D Dimensions A 10 20 30 40 50 60 70 80 100 .630 [16.00] .880 [22.35] 1.130 [28.70] 1.380 [35.05] 1.630 [41.40] 1.880 [47.75] 2.130 [54.10] 2.380 [60.45] 2.880 [73.15] .136 [3.45] (2 Plc) Recommended PC Board Layout Note: Refer to Tyco Electronics Customer Drawings for additional PC board layout information and dimensional tolerances. No. of Pos. .190 [4.83] (2 Plc) B 9 19 29 39 49 59 69 79 99 C D .225 [5.72] .475 [12.07] .725 [18.42] .975 [24.77] 1.225 [31.12] 1.475 [37.47] 1.725 [43.82] 1.975 [50.17] 2.475 [62.87] .550 [13.97] .800 [20.32] 1.050 [26.67] 1.300 [33.02] 1.550 [39.37] 1.800 [45.72] 2.050 [52.07] 2.300 [58.42] 2.800 [71.12] Header Part Numbers Latching Non-Latching 5-104895-1 5-104894-1 5-104895-2 5-104894-2 5-104895-3 5-104894-3 5-104895-4 5-104894-4 5-104895-5 5-104894-5 5-104895-6 5-104894-6 5-104895-7 5-104894-7 5-104895-8 5-104894-8 6-104895-0 6-104894-0 Note: All part numbers are RoHS compliant. 19 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Cable-to-Board Connectors Product Facts receptacle connectors provide cableto-board connection capabilities for vertical headers (non-latching) and right-angle headers (latching and non-latching) IDC (Insulation Displacement Crimp) mass termination of solid or stranded round conductor .050 [1.27] centerline ribbon cable with PVC or polyethylene insulation Accommodates ribbon cable conductor sizes of 28 AWG [0.08-0.09 mm2] and 30 AWG [0.05 mm2] and insulation diameters up to .036 [0.91] maximum Reliable single beam receptacle contact design Duplex plated receptacle contacts; gold plated in mating area, tin in termination area Terminating covers (sold separately) provide both strain relief and protection to the termination area Sizes of 10, 20, 30, 40, 50, 60, 70, 80 and 100 positions Connectors available with or without metal latch Connectors without latches are polarized to help prevent mismating Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association File No. LR7189 Cable-to-Board Connectors Double-row 2 R R These double-row cable connectors, with a .050 x .050 [1.27 x 1.27] centerline contact spacing, provide cable-to-board connection capabilities for the AMPMODU 50/50 Grid Connector System. Cable connectors without a latch will mate with the vertical headers (page 16), while cable connectors with or without a latch can be used to mate with the right-angle headers (page 19). The cable connectors feature reliable singlebeam IDC (insulation displacement crimp) contacts which are duplex plated with .000030 [0.00076] gold. These contacts can be mass terminated to either solid or stranded round conductor ribbon cable with conductor sizes of 28 AWG [0.08-0.09 mm2] and 30 AWG [0.05 mm2] and a maximum insulation diameter of .036 [0.91]. During termination, the terminating covers, which must be purchased separately, assist in guiding the wire into the IDC contacts, then provide strain relief when fully seated. Actual termination is accomplished with the Tyco Electronics manual tooling shown on page 23. mounted right-angle header. The cable connector without a metal latch features polarization to help prevent mismating. All connectors are available in sizes ranging from 10 through 100 positions (in 10 position increments). The latching version of the cable connector is equipped with a metal latch which provides positive retention of the receptacle cable connector when mated with a surface- 20 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27] Centerline Receptacle Connectors, Double Row, With and Without Latch A 2 Material and Finish Housing -- Thermoplastic, black, 94V-0 rated Latch -- Stainless steel Contacts -- Phosphor bronze; duplex plated .000030 [0.00076] minimum gold in mating area, .000150 [0.00381] minimum tin on solder tail, with entire contact underplated .000050 [0.00127] minimum nickel .280 [7.11] .627 [15.94] .690 [17.56] Related Product Data Mating Headers -- page 16, 19 (latching) Terminating Covers (Must be Purchased Separately, 2 Required per Connector) -- page 22 Termination Tooling -- page 23 Performance Specifications -- page 24 D .120 [3.05] .050 [1.27] Typ B Spaces at .050 [1.27] = C Technical Documents -- page 24 Product Specification 108-1443 Application Specification 408-9817, 408-9909 Packaging: Tube .284 .327 [7.21] [8.31] .050 [1.27] Dimensions No. of Pos. A 10 20 30 40 50 60 70 80 100 .578 [14.68] .828 [21.03] 1.078 [27.38] 1.328 [33.73] 1.578 [40.08] 1.828 [46.43] 2.078 [52.78] 2.328 [59.13] 2.828 [71.83] B 4 9 14 19 24 29 34 39 49 C D .200 [5.08] .450 [11.43] .700 [17.78] .950 [24.13] 1.200 [30.48] 1.450 [36.83] 1.700 [43.18] 1.950 [49.53] 2.450 [62.23] .266 [6.76] .516 [13.11] .766 [19.46] 1.016 [25.81] 1.266 [32.16] 1.516 [38.51] 1.766 [44.86] 2.016 [51.21] 2.516 [63.91] Receptacle Part Numbers With Latch Without Latch 5-104892-1 5-104893-1 5-104892-2 5-104893-2 5-104892-3 5-104893-3 5-104892-4 5-104893-4 5-104892-5 5-104893-5 5-104892-6 5-104893-6 5-104892-7 5-104893-7 5-104892-8 5-104893-8 6-104892-0 6-104893-0 Note: All part numbers are RoHS compliant. 21 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Cable Connector Terminating Cover, Double Row Terminating Covers for Cable Connectors Material 2 Glass-filled thermoplastic, black, 94V-0 rated A .191 [4.85] Related Product Data Connectors used with Covers -- page 21 Termination Tooling -- page 23 Technical Documents -- page 24 .277 [7.04] Product Specification 108-1443 Application Specification 408-9817, 408-9909 Packaging: Plastic bag No. of Dimension Terminator Cover Pos. A Part Numbers 10 .565 [14.35] 104891-1 20 .815 [20.70] 104891-2 30 1.065 [27.05] 104891-3 40 1.315 [33.82] 104891-4 50 1.565 [39.75] 104891-5 60 1.815 [46.10] 104891-6 70 2.065 [52.45] 104891-7 80 2.315 [58.80] 104891-8 100 2.815 [71.50] 1-104891-0 Note: Terminating covers must be purchased separately, two are required for each cable connector. Note: All part numbers are RoHS compliant. 22 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Application Tooling for Cable Connectors IDC (Insulation Displacement Crimp) Tooling The Manual Miniature Application Frame Assembly 91295-1, equipped with a Cover Closing Kit 543518-1, is used for the IDC termination of ribbon cable to the cable connectors shown on page 21. Prior to termination, the covers must be partially assembled onto a connector housing, the cable inserted between the covers and contacts and the covers preclosed by hand, clamping the cable in place. 2 In the Manual Miniature Application Frame Assembly, the covers are fully seated to complete the mass termination and provide strain relief for the completed connection. Manual Miniature Application Frame Assembly 91295-1 with Cover Closing Kit 543518-1 For tooling information, call Technical Support Center 1-800-522-6752. Note: Refer to Tyco Electonics Instruction Sheets 408-9817 (Frame Assembly 91295-1) and 408-9909 (Cover Closing Kit 543518-1) for complete termination/tooling information. Note: All part numbers are RoHS compliant. 23 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPMODU Interconnection System Performance Specifications Performance Specifications/ Technical Documents Board-to-Board Connectors, Vertical and Right-Angle Mating Force: 6.4 oz (1.78 N] max. per contact Unmating Force: 1.0 oz [0.28 N] min. per contact Durability: Tested to 200 cycles min. Current Rating: (30C T rise): .5 ampere per contact Operating Temperature Range: -65C to +105C Termination Resistance: 16 milliohms max. (initial) Insulation Resistance: 5000 megohms min. (initial) Dielectric Withstanding Voltage: 300 VAC 2 Cable-to-Board Connectors Mating Force: 6.4 oz (1.78 N] max. per contact Unmating Force Without Latch: .5 oz [0.14 N] min. per contact Durability: Tested to 200 cycles min. Current Rating: (10C T rise): .5 ampere per contact Operating Temperature Range: -65C to +105C Termination Resistance: 25 milliohms max. (initial and final) Insulation Resistance: 5000 megohms min. (initial) Dielectric Withstanding Voltage: 300 VAC Technical Documents Various technical documents are available for your use: Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors 108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable Connectors Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person. 114-7010 AMPMODU 50/50 Grid Connector System Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. 408-9817 Manual Miniature Application Frame Assembly 91295-1 408-9909 Cover Closing Kit 543518-1 Note: All part numbers are RoHS compliant. 24 Catalog 1307819 Revised 8-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208