Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
1307819–?M–LUG–FP–8-08
AMPMODU
Interconnection System
Catalog 1307819 Revised 8-08 AMPMODU Interconnection System
2
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Table of Contents
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
.050 x .050
[1.27 x 1.27]
Centerline
.050 x .100
[1.27 x 2.54]
Centerline
AMPMODU
2mm Connectors
.100 x .100
[2.54 x 2.54]
Centerline
.125 x .125
[3.18 x 3.18]
Centerline
1
2
3
4
5
6
.156 [3.96]
Centerline
7
Shunts
8
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to confirm the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
© 2008 and 2004 Tyco Electronics
Corporation. All Rights Reserved.
AMP, ACTION PIN, AMP-LATCH,
AMP-O-LECTRIC, AMP-O-MATIC,
AMPLIMITE, AMPMODU, AMPOMATOR,
CERTI-CRIMP, CHAMPOMATOR,
PRO-CRIMPER, R-CAM, TE LOGO and
TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
Teflon®is a trademark of E.I. du Pont de
Nemours and Company.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
See inside back cover for Global
Contacts and phone numbers.
PC/104 and PC/104-
Plus
Connectors
Introduction …………………………………………………………………………………5
PC/104, Press Fit …………………………………………………………………………6, 7
PC/104-
Plus
, Press Fit ……………………………………………………………………8, 9
PC/104, Solder ……………………………………………………………………………10
PC/104-
Plus
, Solder ………………………………………………………………………11
Accessories, Kits …………………………………………………………………………12
0.050 [1.27] x 0.050 [1.27] CENTERLINE
AMPMODU 50/50 Grid
Board-to-Board Vertical Receptacles and Headers:
Introduction ……………………………………………………………………………13, 14
Vertical Receptacles, Double Row ………………………………………………………15
Vertical Headers, Double Row ……………………………………………………………16
Recommended PC Board Layouts ………………………………………………………17
Board-to-Board Right-Angle Headers:
Introduction …………………………………………………………………………………18
Right-Angle Headers, Double Row, Latching and Non-Latching ……………………19
Cable-to-Board Connectors:
Introduction …………………………………………………………………………………20
Receptacle Connectors, Double Row, With and Without Latch ………………………21
Cable Connector Terminating Cover, Double Row ……………………………………22
IDC (Insulation Displacement Crimp) Tooling …………………………………………23
Performance Specifications ………………………………………………………………24
Technical Documents ………………………………………………………………………24
.050 [1.27] x 0.100 [2.54] CENTERLINE
AMPMODU System 50……………………………………………………………………………25
Board-to-Board Connectors, Thru-Hole:
Introduction …………………………………………………………………………………26
Headers, Shrouded and Unshrouded ………………………………………………27-35
Introduction …………………………………………………………………………………36
Receptacles ……………………………………………………………………………37-40
PC Board Hole Layouts ………………………………………………………………41, 42
Board-to-Board Connectors, Surface-Mount:
Introduction …………………………………………………………………………………43
Headers ……………………………………………………………………………………44
Receptacles ………………………………………………………………………………45
Cable-to-Board Connectors, FFC Cable:
Introduction …………………………………………………………………………………46
Flexible Flat Conductor Cable ……………………………………………………………47
FFC Contacts ………………………………………………………………………………48
Receptacle Housings …………………………………………………………………49-52
ZIF-Line Connectors …………………………………………………………………53, 54
Cable-to-Board Connectors, Ribbon Cable:
Introduction …………………………………………………………………………………55
Ribbon Cable Receptacles ………………………………………………………………56
Paddleboard Receptacles ………………………………………………………………57
Flat Ribbon Cable ……………………………………………………………………58, 59
Application Tooling for Flex Film Contacts ………………………………………………60
Application Tooling ………………………………………………………………………60-62
Performance Specifications ………………………………………………………………63
Technical Documents ………………………………………………………………………64
1
2
3
AMPMODU 2mm Connectors
AMPMODU 2mm Connectors (Board to Board) ……………………………………………65
Headers, Unshrouded, Double Row, Thru-Hole Mount ………………………………66, 67
Breakaway Headers, Unshrouded, Double Row, Thru-Hole Mount …………………68-70
Breakaway Headers, Unshrouded, Double Row, Surface Mount ……………………71, 72
Stacking Header, Unshrouded, Double Row, Thru-Hole Mount …………………………73
Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount …………………74, 75
Headers, Shrouded, Double Row, Surface Mount ……………………………………76, 77
Headers, Shrouded, Double Row, Thru-Hole Mount with Cable Shrouds …………78, 79
Receptacles, Double Row, Thru-Hole, Vertical Mount…………………………………80, 81
Receptacles, Double Row, Surface Mount, Right-Angle Mount …………………………82
Receptacles, Double Row, Thru-Hole, Right-Angle Mount ………………………………83
Receptacles, Double Row, Surface Mount, Vertical Mount ………………………………84
.100 [2.54] x .100 [2.54] CENTERLINE
Introduction ………………………………………………………………………………85-87
Terms Explained ………………………………………………………………………………87
Wire Sizes………………………………………………………………………………………88
Contact Platings ………………………………………………………………………………88
Mating Post Lengths …………………………………………………………………………88
Application Tooling …………………………………………………………………………88
Board-to-Board Solutions Guides, .100[2.54] Centerline Products …………………89
Wire-to-Board Solutions Guide, .100[2.54] Centerline Products ……………………89
Mating Post Selection Guide ………………………………………………………………90
Parallel Stacking Guide for Board-to-Board Applications ……………………………91
Board-to-Board Products:
Unshrouded Headers ………………………………………………………………92-100
Breakaway and Retention Headers-Unshrouded ………………………………101-105
Reeled Breakaway Headers ………………………………………………………106, 107
Surface Mount Breakaway Headers ………………………………………………108-110
Unshrouded Stacking Headers- Breakaway ……………………………………111-113
Shrouded Headers …………………………………………………………………114-140
Standard Profile ……………………………………………………………………114-133
Low Profile …………………………………………………………………………134-140
Shrouded Stacking Headers ………………………………………………………141-144
ACTION PIN Headers ………………………………………………………………145-149
ACTION PIN Press-Fit Posts ………………………………………………………150, 151
Application Tooling for ACTION PIN Posts ……………………………………152, 153
ACTION PIN Stacking Connectors ………………………………………………154-161
Application Tooling for AMP ACTION PIN Stacking Connectors …………………162
0.025 [0.64] Square Posts ………………………………………………………………163
0.025 [0.64] Square Continuous Posts……………………………………………164, 165
0.045 [1.14] Square Continuous Posts……………………………………………166, 167
Horizontal Mount Receptacle Assemblies, Mod II ………………………………168-173
Vertical Mount Receptacle Assemblies, Mod II & Mod IV ………………………174-184
Surface Mount Vertical Receptacles, Mod IV ……………………………………185-192
Two-Piece Printed Circuit Board Connectors ……………………………………193-202
Accessories …………………………………………………………………………203-205
Wire-to-Board Products:
Locking Clip Contacts and Housings ……………………………………………206-209
Mod IV Contacts and Housings ……………………………………………………210-220
Short Point Contacts and Housings ………………………………………………221-224
MTE Interconnection System ………………………………………………………225-250
Surface Mount MTE Headers (Right-Angle & Vertical) ………………………251, 252
Interchangeable Contacts, Wire Crimp (Snap-In) ……………………………253, 254
MT and Shielded MT Connectors …………………………………………………255-265
Mini-Tandem Spring Receptacle Contacts ………………………………………266-269
Application Tooling ……………………………………………………………………270-275
Technical Documents …………………………………………………………………276-278
3
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Table of Contents (Continued)
AMPMODU Interconnection System
1
2
3
4
5
6
7
8
.050 x .050
[1.27 x 1.27]
Centerline
.050 x .100
[1.27 x 2.54]
Centerline
AMPMODU
2mm Connectors
.100 x .100
[2.54 x 2.54]
Centerline
.125 x .125
[3.18 x 3.18]
Centerline
.156 [3.96]
Centerline Shunts
PC/104 and PC/104-
Plus
Connectors
4
5
4
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Table of Contents (Continued)
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
.050 x .050
[1.27 x 1.27]
Centerline
.050 x .100
[1.27 x 2.54]
Centerline
AMPMODU
2mm Connectors
.100 x .100
[2.54 x 2.54]
Centerline
.125 x .125
[3.18 x 3.18]
Centerline
1
2
3
4
5
6
.156 [3.96]
Centerline
7
Shunts
8
.125 [3.18] x .125 [3.18] CENTERLINE
Wire-to-Board Product:
Level V IDC Connectors ……………………………………………………………279-282
.156 [3.96] CENTERLINE
Mod I 0.031 x 0.062 Interconnection System
Introduction …………………………………………………………………………283, 284
Receptacles, Vertical and Horizontal Board Mount ……………………………285, 286
Receptacle Assemblies, Vertical and Horizontal Board Mount …………………287-289
Receptacles, Crimp Snap-In (Wire Applied) …………………………………………290
Receptacle Housings, Standard Profile-Unkeyed (With/Without Strain Relief) …291, 292
Receptacle Housings, Low Profile-Keyed ……………………………………………293
Posts, Machined Applied ………………………………………………………………294
Headers:
Straight Post, Keyed ……………………………………………………………295, 296
Right-Angle, Keyed ……………………………………………………………………297
Locking Clip Contacts, Crimp Snap-In (Wire Applied) ………………………………298
Locking Clip Connector Housings, Single Row, Crimp Snap-In ……………………299
Application Tooling ………………………………………………………………300-304
Performance Specifications …………………………………………………………305
Technical Documents …………………………………………………………………305
Shunts
Dual In-Line Package DIP Shunts …………………………………………………306, 307
Post Shunts …………………………………………………………………………308-310
Performance Specifications …………………………………………………………311
Technical Documents …………………………………………………………………311
Part Number Index …………………………………………………………………………313-316
6
7
8
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted mate-
rials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■Cross-Reference from
Non-compliant to Compliant Products
■Ability to browse RoHS
Compliant Products in our
on-line catalog
■Downloadable Technical Data
Customer Information
Presentation
■More detailed information
regarding the definitions
used above
■So whatever your questions when it comes to RoHS,
we have the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
5
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104 and PC/104-
Plus
Connectors
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
1
The PC/104 and PC/104-
Plus
connectors are industry
standard product offerings
which comply with the
interconnection require-
ments defined by the
PC/104 organization
(http://www.pc104.org)
Both products are designed
specifically for “flat-rock”
press-fit installation for ease
of application. Solder ver-
sion is also available.
Optional integral standoffs
minimize the customer’s
system assembly time.
The Tyco Electronics offer-
ing of the standard PC/104
product is a unitized con-
nector rather than the two
piece, 40 and 64 position
connectors currently on the
market. Customer needs to
stock and apply only one
part number rather than
two.
Performance Specifications
Electrical Characteristics
Meets requirements of PC/104 and
PC/104-
Plus
standards
Nominal Resistance —
10 milliohms maximum, ⌬R
Insulation Resistance —
1000 megohms minimum
Dielectric Withstanding Voltage —
500 VAC for 1 min. at sea level
Mechanical Characteristics
Meets requirements of PC/104 and
PC/104-
Plus
standards
Current — Signal application only
Temperature — –55° to 105°C
Material and Finish
Housing — Black Thermoplastic, UL
94V-0
Contact — Phosphor Bronze, Full Gold
all over Nickel (stackthrough), Gold on
mating end, Tin or Tin-lead on PCB tail
all over Nickel (non-stackthrough)
Need more information?
Call Technical
Support 1-800-522-6752:
Technical Support is staffed
with specialists well versed
in all Tyco Electronics prod-
ucts. The Center can pro-
vide you with:
■Technical Support
■Catalogs
■Technical Documents
■Tyco Electronics
Authorized Distributor
Locations
Technical Documents
Product Specifications
108-1956
Application Specifications
114-13021
Connector Centerline Position
PC/104 .100 104*
2.54
PC/104-
Plus
.079 120**
2.0
*Two circuits plugged per PC/104 specification.
Other options available.
**One circuit plugged per PC/104-
Plus
specifica-
tion. Other options available.
Product Facts
■Press fit design —
eliminates hand soldering
■Unitized PC/104 connector
assembly — eliminates two
piece (64 pin & 40 pin)
configuration
■Integral board spacers with
captive hardware — eases
& improves assembly
efficiency while minimizing
stocked hardware
■“Flat-rock” insertable — no
need for complex insertion
tooling
■Recognized by Underwriters'
Laboratories to US
and Canadian
standards
file No. E28476
■Fully compliant with PC104
& PC104-
Plus
standards
■Solutions available for lead
free processes (ie. ENIG
and silver immersion plated
PCB's)
6
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104, Press-Fit
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
1
Stackthrough, No Standoffs
Gold plated contacts*
Part No. 1375795-1 (keyed), Part No. 1375795-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375795-3 (keyed), Part No. 1375795-4 (unkeyed)
.390
[9.90]
.
19
5
[4.95]
Ty p .
3
.
21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Sq.
Ty p .
.025
[0.64]
Ty p .
.100
[2.54] .483±.013
[12.27±0.34]
Ty p .
.435
[11.05]
Ty p .
.100
[2.54]
.300
[7.62]
3.10
[78.74]
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
Keyed
.300
[7.62]
3.10
[78.74]
Unkeyed
Non-Stackthrough, No Standoffs
Tin-lead plated tails*
Part No. 1375796-1 (keyed), Part No. 1375796-2 (unkeyed)
Matte tin plated tails**
Part No. 1375796-3 (keyed), Part No. 1375796-4 (unkeyed)
Ty p .
.100
[2.54]
.119±.013
[3.03±0.34]
Ty p .
.435
[11.05]
Ty p .
.100
[2.54]
.390
[9.90]
.
19
5
[4.95]
Ty p .
3
.
21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
7
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104, Press-Fit (Continued)
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
1
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
2.01
[51.11]
Sq.
Ty p .
.025
[0.64]
Ty p .
.100
[2.54] .483±.013
[12.27±0.34]
Ty p .
.435
[11.05]
Ty p .
.100
[2.54]
Ty p .
.600
[15.24]
Ty p .
.100
[2.54] .119±.013
[3.03±0.34]
Ty p .
.435
[11.05]
Ty p .
.100
[2.54]
Ty p .
.600
[15.24]
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
2.01
[51.11]
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Sq.
Ty p .
.025
[0.64]
Ty p .
.100
[2.54] .483±0.13
[12.27±0.34]
Ty p .
.435
[11.05]
.100
[2.54]
Ty p .
Ty p .
.600
[15.24]
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs.
Unkeyed
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs.
Keyed
Ty p .
.100
[2.54] .119±.013
[3.03±0.34]
Ty p .
.435
[11.05]
.100
[2.54]
Ty p .
Ty p .
.600
[15.24]
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Stackthrough, 2 Standoffs
Gold plated contacts*
Part No. 1375793-1 (keyed), Part No. 1375793-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375793-3 (keyed), Part No. 1375793-4 (unkeyed)
Non-Stackthrough, 2 Standoffs
Tin-lead plated tails*
Part No. 1375794-1 (keyed), Part No. 1375794-2 (unkeyed)
Matte tin plated tails**
Part No. 1375794-3 (keyed), Part No. 1375794-4 (unkeyed)
Stackthrough, 4 Standoffs
Gold plated contacts*
Part No. 1375791-1 (keyed), Part No. 1375791-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375791-3 (keyed), Part No. 1375791-4 (unkeyed)
Non-Stackthrough, 4 Standoffs
Tin-lead plated tails*
Part No. 1375792-1 (keyed), Part No. 1375792-2 (unkeyed)
Matte tin plated tails**
Part No. 1375792-3 (keyed), Part No. 1375792-4 (unkeyed)
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
8
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104-
Plus
, Press-Fit
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
1
2.37
[60.30]
.315
[8.00]
Plugged
Circuit
(-3 or -6 only)
Plugged
Circuit
(-2 or -5 only) .015
[0.39]
Sq.
Ty p .
.020
[0.51]
Ty p .
.079
[2.00]
.368
[9.35]
.483±.013
[12.27±0.34]
Ty p .
Ty p .
.079
[2.00]
.236
[6.00]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-1, 1375799-4,
1375800-1, 1375800-4
.236
[6.00]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-2, 1375799-5,
1375800-2, 1375800-5
.236
[6.00]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-3, 1375799-6,
1375800-3, 1375800-6
Ty p .
.079
[2.00]
.368
[9.35]
.112±.013
[2.85±0.34]
Ty p .
Ty p .
.079
[2.00]
2.37
[60.30]
.315
[8.00]
Plugged
Circuit
(-3 or -6 only)
Plugged
Circuit
(-2 or -5 only) .015
[0.39]
See Customer Drawing for Hole Geometry and Recommended Plating.
(Including ENIG plated PCB's)
Stackthrough, No Standoffs
Gold plated contacts*
Part No. 1375799-1 (unkeyed)
Part No. 1375799-2 (keyed-A1) per PC/104-
Plus
specification
Part No. 1375799-3 (keyed-D30) per PC/104-
Plus
specification
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375799-4 (unkeyed)
Part No. 1375799-5 (keyed-A1) per PC/104-
Plus
specification
Part No. 1375799-6 (keyed-D30) per PC/104-
Plus
specification
Non-Stackthrough, No Standoffs
Tin-lead plated tails*
Part No. 1375800-1 (unkeyed)
Part No. 1375800-2 (keyed-A1) per PC/104-
Plus
specification
Part No. 1375800-3 (keyed-D30) per PC/104-
Plus
specification
Matte tin plated tails**
Part No. 1375800-4 (unkeyed)
Part No. 1375800-5 (keyed-A1) per PC/104-
Plus
specification
Part No. 1375800-6 (keyed-D30) per PC/104-
Plus
specification
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
9
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104-
Plus
, Press-Fit (Continued)
AMPMODU Interconnection System
PC/104 and PC/104-
Plus
Connectors
1
Ty p .
0.79
[2.00] .112±.013
[2.85±0.34]
.600
[15.24]
Ty p .
Ty p .
.368
[9.35]
Ty p . 0.79
[2.00]
.315
[8.00]
.015
[0.39]
2.37
[60.30]
Plugged
Circuit
(-3 and -6 only)
Plugged
Circuit
(-2 and -5 only)
Recommended PC Board Layout
for 1375797-1, 1375797-4,
1375798-1, 1375798-4
Recommended PC Board Layout
for 1375797-2, 1375797-5,
1375798-2, 1375798-5
Recommended PC Board Layout
for 1375797-3, 1375797-6,
1375798-3, 1375798-6
.315
[8.00]
.015
[0.39]
2.37
[60.30]
Plugged
Circuit
(-3 and -6 only)
Plugged
Circuit
(-2 and -5 only)
Sq.
Ty p .
.020
[0.51]
Ty p .
0.79
[2.00]
.483±.013
[12.27±0.34]
.600
[15.24]
Ty p .
Ty p .
.368
[9.35] Ty p .
.079
[2.00]
See Customer Drawing for
Hole Geometry and Recommended Plating.
Stackthrough, 2 Standoffs
Gold plated contacts*
Part No. 1375797-1 (unkeyed)
Part No. 1375797-2 (keyed-A1)
per PC/104-
Plus
specification
Part No. 1375797-3 (keyed-D30)
per PC/104-
Plus
specification
Gold plated contacts with Tin
plated compliant pin section**
Part No. 1375797-4 (unkeyed)
Part No. 1375797-5 (keyed-A1)
per PC/104-
Plus
specification
Part No. 1375797-6 (keyed-D30)
per PC/104-
Plus
specification
Non-Stackthrough, 2 Standoffs
Tin-lead plated tails*
Part No. 1375798-1 (unkeyed)
Part No. 1375798-2 (keyed-A1)
per PC/104-
Plus
specification
Part No. 1375798-3 (keyed-D30)
per PC/104-
Plus
specification
Matte tin plated tails**
Part No. 1375798-4 (unkeyed),
Part No. 1375798-5 (keyed-A1)
per PC/104-
Plus
specification
Part No. 1375798-6 (keyed-D30)
per PC/104-
Plus
specification
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
10
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104, Solder
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
PC/104 and PC/104-
Plus
Connectors
1
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
.300
[7.62]
3.10
[78.74]
Unkeyed
.300
[7.62]
3.10
[78.74]
.041±.003
[1.03±0.08]
Dia.
102 Plcs.
Plated Through Hole
Keyed
Non-Stackthrough, No Standoffs
Part No. 1375963-3 (keyed)
Part No. 1375963-4 (unkeyed)
Ty p .
.100
[2.54] .119±.013
[3.03±0.34]
Ty p .
.435
[11.05]
Ty p .
.100
[2.54]
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
2.01
[51.11]
Plugged
Circuit
Plugged
Circuit
Non-Stackthrough, 4 Standoffs
Part No. 1375959-3 (keyed)
Part No. 1375959-4 (unkeyed)
Ty p .
.100
[2.54] .119±.013
[3.03±0.34]
Ty p .
.435
[11.05]
Ty p .
.100
[2.54]
Ty p .
.600
[15.24]
.390
[9.90]
.195
[4.95]
Ty p .
3.21
[81.60]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
2.01
[51.11]
Non-Stackthrough, 2 Standoffs
Part No. 1375961-3 (keyed)
Part No. 1375961-4 (unkeyed)
Ty p .
.100
[2.54] .119±.013
[3.03±0.34]
Ty p .
.435
[11.05]
.100
[2.54]
Ty p .
Ty p .
.600
[15.24]
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs. .040±.003
[1.01±0.08]
Dia.
102 Plcs.
Plated Through Hole
Keyed
Recommended PC Board Layout
Recommended PC Board Layout
.300
[7.62]
.125
[3.18]
3.10
[78.74]
0.05
[1.27]
Dia.
2 Plcs.
Unkeyed
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
[0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
11
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
PC/104-
Plus
, Solder
AMPMODU Interconnection System
Note: All part numbers are RoHS
compliant.
PC/104 and PC/104-
Plus
Connectors
1
Non-Stackthrough, 2 Standoffs
Part No. 1375965-4 (unkeyed)
Part No. 1375965-5 (keyed-A1)
per PC/104-
Plus
specification
Part No. 1375965-6 (keyed-D30)
per PC/104-
Plus
specification
.315
[8.00]
.015
[0.39]
2.37
[60.30]
Plugged
Circuit
(-6 only)
Plugged
Circuit
(-5 only)
Ty p .
.079
[2.00] .112±.013
[2.85±0.34]
.600
[15.24]
Ty p .
Ty p .
.368
[9.35]
Ty p . 0.79
[2.00]
Recommended PC Board Layout for 1375965-5
Recommended PC Board Layout for 1375965-6
.236
[6.00]
2.28
[58.0]
.035±.003
[0.88±0.08]
Dia.
120 Plcs.
Plated Through Hole
Recommended PC Board Layout
for 1375967-4
.236
[6.00]
2.28
[58.0]
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
Recommended PC Board Layout
for 1375967-5
.236
[6.00]
2.28
[58.0]
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
Recommended PC Board Layout
for 1375967-6
Non-Stackthrough, No Standoffs
Part No. 1375967-4 (unkeyed)
Part No. 1375967-5 (keyed-A1)
per PC/104-
Plus
specification
Part No. 1375967-6 (keyed-D30)
per PC/104-
Plus
specification
Ty p .
.079
[2.00]
.368
[9.35]
.112±.013
[2.85±0.34]
Ty p .
Ty p .
.079
[2.00]
2.37
[60.30]
.315
[8.00]
Plugged
Circuit
(-6 only)
Plugged
Circuit
(-5 only) .015
[0.39]
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
.035±.003
[0.88±0.08]
Dia.
119 Plcs.
Plated Through Hole
Recommended PC Board Layout for 1375965-4
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
[0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
12
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Accessories
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
PC/104 and PC/104-
Plus
Connectors
1
Shroud, PC/104-
Plus
Part No. 1375801-1
Material — PBT, Black
Organizer, PC/104
Part Number 1445251-1
Material —Polyester, PBT, Black
2.45
[62.34]
2.53 ± 0.10
[64.36 ± 0.25]
.450 ± .010
[11.43 ± 0.25]
.370
[9.41] Ty p .
.079
[2.00]
Ty p .
.039
[1.00]
.440 ± .003
[11.18 ± 0.08]
Ty p .
.255
[6.47]
2.39
[60.76]
.333
[8.46]
Kit Packaging
Part Numbers
Keyed
CircuitsKeyed
CircuitsKeyed
Circuits
.10 [2.54] Typ.
.05 [1.27] Typ.
.10
[2.54] Typ.
.05
[1.27] Typ.
2.01
[51.11]
3.21
[81.60]
.195
[4.95] Typ.
.390
[9.90]
Part No. 1445441-3 Part No. 1445440-3 Part No. 1445439-3
Component Part Number
Part Number Connector Assembly Organizer Style
1445441-3 1375795-3 1445251-1 Keyed
1445441-4 1375795-4 1445251-1 Unkeyed
1445440-3 1375793-3 1445251-1 Keyed
1445440-4 1375793-4 1445251-1 Unkeyed
1445439-3 1375791-3 1445251-1 Keyed
1445439-4 1375791-4 1445251-1 Unkeyed
13
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU 50/50 Grid Connector System
AMPMODU Interconnection System
Board-to-Board Vertical
Receptacles and Headers
2
Produced under a Quality
Management System certi-
fied to ISO 9001
A copy of the
certificate is available
upon request.
Vertical Headers,
Board-to-Board
(Page 16)
Vertical Headers,
Board-to-Board
(Page 16)
Right-Angle Headers,
Board-to-Board (Page 19)
Vertical Headers,
Board-to-Board
(Page 16):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height
Vertical Receptacles,
Board-to-Board
(Page 15)
Vertical Receptacles,
Board-to-Board
(Page 15)
Receptacles,
Cable-to-Board,
With Latch
(Page 21)
Receptacles,
Cable-to-Board
Without Latch
(Page 21)
ISO
Certified
9001
14
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Board-to-Board Vertical Receptacles and Headers
AMPMODU Interconnection System
Board-to-Board Vertical
Receptacles and Headers
2
Product Facts
■ Surface-mount products for
parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
■ High density .050 x .050
[1.27x1.27] centerline grid
■ Three board-to-board stack
heights: .250 [6.35], .320
[8.13] and .390 [9.91]
■ Non-protrusive metallic
holddowns
■ Reliable dual beam
receptacle contacts for
redundant contact
■ Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
■ Compatible with standard
surface-mount processing
(VPR and IR)
■ Receptacle and header allow
for drainage of processing
fluids
■ Tape and reel packaging
available. Contact
Tyco Electronics for details
■ Polarized header and recep-
tacle assemblies
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by
Canadian Standards
Association
File No. LR7189
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications.
Right-angle board-to-board
and cable-to-board
applications are also
possible, since the vertical
receptacles also mate with
non-latching right-angle
headers (page 19) and the
vertical headers also mate
with non-latching cable
connectors.
Available are double row,
vertical shrouded headers
and receptacles in sizes
ranging from 10 through
100 positions (in 10 position
increments).
Parallel board-to-board
stack heights of .250 [6.35],
.320 [8.13] and .390 [9.91]
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers.
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
PC boards and allow
surface mounting to both
sides of the board. In
addition to providing
retention during processing,
the holddowns are soldered
during reflow and therefore
provide long-term strain relief
for the solder joints.
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
to be compatible with
standard surface-mount
processes; IR (infrared) and
VPR (vapor phase reflow).
The surface-mount
connectors have been
designed so that
dimensioning, tolerances,
referenced datums,
holddown characteristics
and packaging methods
result in a system that is
compatible with robotic
assembly.
The headers and
receptacles feature
polarization to prevent
misalignment.
Three Board Stack Heights
Non-Protrusive
Metallic Holddowns
.250±.006
[6.35±0.15 ]
.320±.006
[8.13±0.15]
.390±.006
[9.91±0.15]
R
R
15
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Vertical Receptacles,
Double Row
2
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Headers — pages 16, 19
PC Board Layouts — page 17
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1332
Application Specification
114-7010
Packaging: Tube or Tape and Reel
No. of Dimension Receptacle
Pos. A Part Numbers
Tube Tape and Reel* No Hold Down w/Vacuum Cover
10 .266 [6.75] 5-104652-1 5-147384-1 5-147413-1
20 .516 [13.11] 5-104652-2 5-147384-2 5-147413-3
30 .766 [19.46] 5-104652-3 5-147384-3 5-147413-4
40 1.016 [25.81] 5-104652-4 5-147384-4 —
50 1.266 [32.16] 5-104652-5 5-147384-5 5-147413-2
60 1.516 [38.51] 5-104652-6 5-147384-6 —
70 1.766 [44.86] 5-104652-7 5-147384-7 —
80 2.016 [51.21] 5-104652-8 5-147384-8 —
100 2.516 [63.91] 6-104652-0 5-147384-9 —
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
Polarizing Tab
(For Polarization to
Mating Header)
A.028
[0.71]
.187
[4.75]
.120
[3.05]
.050
[1.27]
.050
[1.27]
.050
[1.27]
16
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Board-to-Board Vertical Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Vertical Headers,
Double Row
2
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Receptacles — page 15, 21
(without latch only)
PC Board Layouts — page 17
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1332
Application Specification
114-7010
Packaging: Tube or Tape and Reel
No. of Dimension
Header Part Numbers
Pos. A .250 [6.35] Mated Height .320 [8.13] Mated Height .390 [9.91] Mated Height
Tubes Tape & Reel* Tubes Tape & Reel* Tubes Tape & Reel*
Hold Down No Hold Down Hold Down No Hold Down
10 .372 [9.44] 5-104655-1 5-147381-1 5-147121-1 5-104656-1 5-147382-1 5-104693-1 — 5-147383-1
20 .622 [15.79] 5-104655-3 5-147381-2 5-147121-2 5-104656-2 5-147382-2 5-104693-2 — 5-147383-2
30 .872 [22.14] 5-104655-4 5-147381-3 — 5-104656-3 5-147382-3 5-104693-3 — 5-147383-3
40 1.122 [28.49] 5-104655-5 5-147381-4 — 5-104656-4 5-147382-4 5-104693-4 — 5-147383-4
50 1.372 [34.84] 5-104655-6 5-147381-5 — 5-104656-5 5-147382-5 5-104693-5 — 5-147383-5
60 1.622 [41.19] 5-104655-7 5-147381-6 — 5-104656-6 5-147382-6 5-104693-6 — 5-147383-6
70 1.872 [47.54] 5-104655-8 5-147381-7 — 5-104656-7 5-147382-7 5-104693-7 — 5-147383-7
80 2.122 [53.89] 5-104655-9 5-147381-8 — 5-104656-8 5-147382-8 5-104693-8 — 5-147383-8
90 2.372 [60.24] — — — 5-104656-9 — 5-104693-9 — —
100 2.622 [66.59] 6-104655-1 5-147381-9 — 6-104656-0 5-147382-9 6-104693-0 5-147503-1 5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
For .250 [6.35] Mated Height
For .320 [8.13] Mated Height
For .390 [9.91] Mated Height
.050
[1.27]
.050
[1.27]
.050
[1.27]
.030
[0.76]
.030
[0.76]
.050
[1.27]
.2255
[5.728]
.225
[5.71]
.2975
[7.557]
.3675
[9.335]
A
A
A
.030
[0.76]
.050
[1.27]
17
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Recommended PC Board Layouts for Vertical Connectors
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Recommended PC
Board Layouts
2
No. of Receptacle Dimensions Header Dimensions
Pos. BC D BC D
10 4 .200 [5.08] .320 [8.12] 4 .200 [5.08] .322 [8.17]
20 9 .450 [11.43] .570 [14.48] 9 .450 [11.43] .572 [14.52]
30 14 .700 [17.78] .820 [20.83] 14 .700 [17.78] .822 [20.87]
40 19 .950 [24.13] 1.070 [27.19] 19 .950 [24.13] 1.072 [27.22]
50 24 1.200 [30.48] 1.320 [33.53] 24 1.200 [30.48] 1.322 [33.57]
60 29 1.450 [36.83] 1.570 [39.88] 29 1.450 [36.83] 1.572 [39.92]
70 34 1.700 [43.18] 1.820 [46.23] 34 1.700 [43.18] 1.822 [46.27]
80 39 1.950 [49.53] 2.070 [52.58] 39 1.950 [49.53] 2.072 [52.62]
90 44 2.200 [55.88] 2.320 [58.93] 44 2.200 [55.88] 2.322 [58.97]
100 49 2.450 [62.23] 2.570 [65.28] 49 2.450 [62.23] 2.572 [65.32]
D
D
.029
[0.74]
BSpaces at .050 [1.27] = C
BSpaces at .050 [1.27] = C
C of Pattern
Detail A
Detail A
C of Pattern
.061
[1.54]
.050
[1.27]
.162
[4.11]
.182
[4.62]
.091
[2.31]
.110
[2.79]
.050
[1.27]
.060
[1.52]
.065
[1.65]
.130
[3.30]
.029
[0.74]
L
L
Headers
Receptacles
Note: Refer to Tyco Electronics
Customer Drawings for additional
PC board layout information and
dimensional tolerances.
.047
[1.19]
2 Plc.
.010
[0.25]
4 Plc.
Detail A
18
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Board-to-Board Right-Angle Headers
AMPMODU Interconnection System
Board-to-Board
Right-Angle Headers
2
AMPMODU 50/50 Grid
Right-Angle Headers will
accommodate a variety of
high density packaging
applications; right-angle
board-to-board applications
when mated with vertical
receptacles (page 15) and
right-angle cable-to-board
applications when mated
with cable connectors
(page 21). The small
.050 x .050 [1.27 x 1.27]
centerline contact spacing
allows efficient use of the
PC board area.
Mechanical support of the
headers to the PC board is
provided by non-protrusive
metallic holddowns
designed for .062 [1.57] or
thicker PC boards. These
holddowns are of the same
design as those used in the
vertical headers (page 16)
and receptacles (page 15).
There are also metallic tabs
that are soldered to the sur-
faces of the PC board pads
for added support.
AMPMODU 50/50 Grid
Right-Angle Headers are
available in double-row, in
either latching or non-
latching versions, and in
sizes ranging from 10
through 100 positions (in 10
position increments). The
latching version provides
positive retention when
mated with the latching
cable connector (page 21).
All headers feature polariza-
tion to help prevent mis-
alignment during mating.
Product Facts
■ Surface-mount products for
right-angle board-to-board
and cable-to-board
applications
■ Double-row, right-angle
shrouded headers
■ High density .050 x .050
[1.27 x 1.27] centerline grid
■ Latching and non-latching
versions available
■ Non-protrusive metallic
holddowns
■ Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
■ Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
■ Compatible with standard
surface-mount processing
(VPR and IR)
■ Standoffs on header
housings allow for drainage
of processing fluids
■ All headers are polarized
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards
Association
File No. LR7189
R
R
19
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Board-to-Board Right-Angle Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Right-Angle Headers, Double
Row, Latching and Non-Latching
2
Material and Finish
Housing — Liquid crystal polymer,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact under-
plated .000050 [0.00127] nickel
Holddown — Copper alloy; plated
.0000150 [0.00381] tin over .000050
[0.00127] nickel
Related Product Data
Mating Receptacles — page 15, 21
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1443
Application Specification
114-7010
Packaging: Tube
Recommended PC Board Layout
No. of Dimensions Header
Pos. Part Numbers
AB C D Latching Non-Latching
10 .630 [16.00] 9 .225 [5.72] .550 [13.97] 5-104895-1 5-104894-1
20 .880 [22.35] 19 .475 [12.07] .800 [20.32] 5-104895-2 5-104894-2
30 1.130 [28.70] 29 .725 [18.42] 1.050 [26.67] 5-104895-3 5-104894-3
40 1.380 [35.05] 39 .975 [24.77] 1.300 [33.02] 5-104895-4 5-104894-4
50 1.630 [41.40] 49 1.225 [31.12] 1.550 [39.37] 5-104895-5 5-104894-5
60 1.880 [47.75] 59 1.475 [37.47] 1.800 [45.72] 5-104895-6 5-104894-6
70 2.130 [54.10] 69 1.725 [43.82] 2.050 [52.07] 5-104895-7 5-104894-7
80 2.380 [60.45] 79 1.975 [50.17] 2.300 [58.42] 5-104895-8 5-104894-8
100 2.880 [73.15] 99 2.475 [62.87] 2.800 [71.12] 6-104895-0 6-104894-0
A
.430
[10.92]
.340
[8.64] .305
[7.75]
B Spaces at
.025 = C
[0.64]
.085
[2.16]
.140
[3.56]
.175
[4.45]
D
.100
[2.54]
Min
.063
[1.57]
(2 Plc)
.190
[4.83]
(2 Plc)
.047 Dia
[1.19]
Plated-Thru Hole
(2 Plc)
.136
[3.45]
(2 Plc)
.050
[1.27]
.352
[8.94]
.213
[5.41]
.050
[1.27]
.050
[1.27]
Ty p .
.029
[0.74]
Ty p
.065
[1.65]
Ty p .
Note: Refer to Tyco Electronics
Customer Drawings for additional
PC board layout information and
dimensional tolerances.
Non-Latching Header
Latching Header
20
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Cable-to-Board Connectors
AMPMODU Interconnection System
Cable-to-Board
Connectors
2
Product Facts
■ Double-row receptacle
connectors provide cable-
to-board connection
capabilities for vertical
headers (non-latching) and
right-angle headers
(latching and non-latching)
■ IDC (Insulation
Displacement Crimp) mass
termination of solid or
stranded round conductor
.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
■ Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
insulation diameters up to
.036 [0.91] maximum
■ Reliable single beam
receptacle contact design
■ Duplex plated receptacle
contacts; gold plated in
mating area, tin in
termination area
■ Terminating covers (sold
separately) provide both
strain relief and protection
to the termination area
■ Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
■ Connectors available with or
without metal latch
■ Connectors without latches
are polarized to help
prevent mismating
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Certified by Canadian
Standards
Association
File No. LR7189
These double-row cable
connectors, with a .050 x
.050 [1.27 x 1.27] centerline
contact spacing, provide
cable-to-board connection
capabilities for the
AMPMODU 50/50 Grid
Connector System. Cable
connectors without a latch
will mate with the vertical
headers (page 16), while
cable connectors with or
without a latch can be used
to mate with the right-angle
headers (page 19).
The cable connectors
feature reliable single-
beam IDC (insulation
displacement crimp)
contacts which are duplex
plated with .000030
[0.00076] gold. These
contacts can be mass
terminated to either solid or
stranded round conductor
ribbon cable with conductor
sizes of 28 AWG [0.08-0.09
mm2] and 30 AWG [0.05
mm2] and a maximum
insulation diameter of .036
[0.91]. During termination,
the terminating covers,
which must be purchased
separately, assist in guiding
the wire into the IDC
contacts, then provide
strain relief when fully
seated. Actual termination
is accomplished with the
Tyco Electronics manual
tooling shown on page 23.
The latching version of the
cable connector is
equipped with a metal latch
which provides positive
retention of the receptacle
cable connector when
mated with a surface-
mounted right-angle header.
The cable connector without
a metal latch features
polarization to help prevent
mismating. All connectors
are available in sizes
ranging from 10 through
100 positions (in 10 position
increments).
R
R
21
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050
[1.27 x 1.27] Centerline
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Receptacle Connectors, Double
Row, With and Without Latch
2
Material and Finish
Housing — Thermoplastic, black,
94V-0 rated
Latch — Stainless steel
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] minimum
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire
contact underplated .000050 [0.00127]
minimum nickel
Related Product Data
Mating Headers — page 16, 19
(latching)
Terminating Covers (Must be
Purchased Separately, 2 Required
per Connector) — page 22
Termination Tooling — page 23
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging: Tube
A
No. of Dimensions Receptacle
Pos. Part Numbers
AB C D
With Latch Without Latch
10 .578 [14.68] 4 .200 [5.08] .266 [6.76] 5-104892-1 5-104893-1
20 .828 [21.03] 9 .450 [11.43] .516 [13.11] 5-104892-2 5-104893-2
30 1.078 [27.38] 14 .700 [17.78] .766 [19.46] 5-104892-3 5-104893-3
40 1.328 [33.73] 19 .950 [24.13] 1.016 [25.81] 5-104892-4 5-104893-4
50 1.578 [40.08] 24 1.200 [30.48] 1.266 [32.16] 5-104892-5 5-104893-5
60 1.828 [46.43] 29 1.450 [36.83] 1.516 [38.51] 5-104892-6 5-104893-6
70 2.078 [52.78] 34 1.700 [43.18] 1.766 [44.86] 5-104892-7 5-104893-7
80 2.328 [59.13] 39 1.950 [49.53] 2.016 [51.21] 5-104892-8 5-104893-8
100 2.828 [71.83] 49 2.450 [62.23] 2.516 [63.91] 6-104892-0 6-104893-0
.280
[7.11]
.627
[15.94] .690
[17.56]
D
.120
[3.05]
B Spaces at
.050 [1.27] = C
.284
[7.21]
.327
[8.31]
.050
[1.27]
.050
[1.27]
Ty p
22
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Terminating Covers for Cable Connectors
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Cable Connector Terminating
Cover, Double Row
2Material
Glass-filled thermoplastic,
black, 94V-0 rated
Related Product Data
Connectors used with Covers —
page 21
Termination Tooling — page 23
Technical Documents — page 24
Product Specification 108-1443
Application Specification
408-9817, 408-9909
Packaging: Plastic bag
No. of Dimension Terminator Cover
Pos. A Part Numbers
10 .565 [14.35] 104891-1
20 .815 [20.70] 104891-2
30 1.065 [27.05] 104891-3
40 1.315 [33.82] 104891-4
50 1.565 [39.75] 104891-5
60 1.815 [46.10] 104891-6
70 2.065 [52.45] 104891-7
80 2.315 [58.80] 104891-8
100 2.815 [71.50] 1-104891-0
Note: Terminating covers must be purchased separately, two are required for
each cable connector.
.277
[7.04]
.191
[4.85]
A
23
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling for Cable Connectors
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
IDC (Insulation Displacement
Crimp) Tooling
2
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
The Manual Miniature
Application Frame
Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 21.
Prior to termination, the
covers must be partially
assembled onto a connec-
tor housing, the cable
inserted between the cov-
ers and contacts and the
covers preclosed by hand,
clamping the cable in
place.
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and pro-
vide strain relief for the
completed connection.
For tooling information, call
Technical Support Center
1-800-522-6752.
Note: Refer to Tyco Electonics
Instruction Sheets 408-9817 (Frame
Assembly 91295-1) and 408-9909
(Cover Closing Kit 543518-1) for
complete termination/tooling infor-
mation.
24
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Performance Specifications
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Performance Specifications/
Technical Documents
2
Board-to-Board Connectors, Vertical and Right-Angle
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force: 1.0 oz [0.28 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (30°C T rise): .5 ampere per contact
Operating Temperature Range: -65°C to +105°C
Termination Resistance: 16 milliohms max. (initial)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC
Cable-to-Board Connectors
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch: .5 oz [0.14 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (10°C T rise): .5 ampere per contact
Operating Temperature Range: -65°C to +105°C
Termination Resistance: 25 milliohms max. (initial and final)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010 AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-9817 Manual Miniature Application Frame Assembly 91295-1
408-9909 Cover Closing Kit 543518-1
