Technical Data Sheet Opto Interrupter ITR20510/TR8 Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free This product itself will remain within RoHS compliant version. Descriptions ITR20510/TR8 is a light reflection switch which includes a GaAs IR-LED transmitter and a NPN photo-transistor with a high photosensitive receiver for short distance, operating in the infrared range. Both components are mounted side- by- side in a plastic package. Applications Camera VCR Floppy disk driver Cassette type recorder Various microcomputer control equipment Device Selection Guide Device No. Chip Material IR GaAs PT Silicon Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 1 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions 0.15mm Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 2 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Absolute Maximum Ratings (Ta=25) Parameter Power Dissipation at(or below) 25 Free Symbol Ratings Unit Pd 75 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current (*1) Pulse width 100s, Duty cycle=1% IFP 1 A Collector Power Dissipation PC 75 mW Collector Current IC 50 mA Collector-Emitter Voltage B VCEO 30 V Emitter-Collector Voltage B VECO 5 Operating Temperature Topr -25~+85 V Storage Temperature Tstg -30~+90 260 Air Temperature Input Output Lead Soldering Temperature (*2) (1) tw=100 sec. , T=10 msec. Tsol t=5 Sec (2) Electro-Optical Characteristics (Ta=25) Parameter Input Output Transfer Characteristics Symbol Min. Typ. Max. Unit Conditions ----- 1.2 --- 1.6 10 V A IF=20mA Peak Wavelength VF IR P --- 940 --- nm --- Dark Current ICEO --- --- 100 nA VCE=10V C-E Saturation Voltage VCE(sat) --- --- 0.4 V IC=2mA ,Ee=1mW/cm2 Light Current IC(ON) 0.1 --- --- Leakage Current ICEOD --- --- 1 mA A VCE=5V IF=20mA Rise time tr --- 20 --- sec Fall time tf --- 20 --- sec VCE=2V IC=100A Forward Voltage Reverse Current Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 VR=5V RL=1K Rev 1 Page: 3 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Typical Electrical/Optical/Characteristics Curves for IR Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 4 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Typical Electro/Optical/Characteristics Curves for PT Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 5 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Typical Electrical/Optical/Characteristics Curves For ITR ( (k ) Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 6 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% NO. Item 1 Solder Heat Test Conditions Test Hours/ Sample Cycles Sizes TEMP.2605 10secs 2 Temperature Cycle H : +85 L : -30 3 Thermal Shock 22pcs 30mins 50Cycles 5mins 30mins 22pcs 5mins 50Cycles 10secs 5mins 22pcs H :+85 L :-10 Failure Judgement Criteria Ac/Re 0/1 IRUx2 EeLx0.8 VFUx1.2 0/1 0/1 UUpper Specification Limit LLower 4 High Temperature Storage TEMP.+90 1000hrs 22pcs 5 Low Temperature Storage TEMP.-30 1000hrs 22pcs 1000hrs 22pcs 0/1 1000hrs 22pcs 0/1 6 DC Operating Life IF=20mA 7 High Temperature/ 85 / 85% R.H Specification Limit 0/1 0/1 High Humidity Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 7 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Recommended Method of Storage The following are general recommendations for moisture sensitive level (MSL) 4 storage and use: z Shelf life in sealed bag: 12 months at < 40 C and < 90% relative humidity (RH) z After bag is opened, devices that will be subjected to reflow solder or other high temperature process must a) Mounted within 72 hours of factory conditions < 30 C/60%RH, or b) Stored at <20% RH z Devices require bake, before mounting, if: Humidity Indicator Card is > 20% when read at 23 5 C z If baking is required, devices may be baked: a) 192 hours at 40,and <5% RH(dry air/nitrogen) or b) 96 hours at 60,and <5% RH for all device containers z c) 24 hours at 125 C Soldering Condition a) Pb-free solder temperature profile b) Reflow soldering should not be done more than two times. c) When soldering, do not put stress on the LEDs during heating. d) After soldering, do not warp the circuit board. z Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Everlight Electronics Co., Ltd. Device NoDRX-205-139 http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 8 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Taping Dimension Progressive direction General Tolerance 0.1 UNIT:mm Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Everlight Electronics Co., Ltd. Device NoDRX-205-139 Aluminum moisture-proof bag Desiccant http:\\www.everlight.com Prepared date:2006/04/06 Label Rev 1 Page: 9 of 10 Prepared by: Carryll Hsu Technical Data Sheet Opto Interrupter ITR20510/TR8 Packing Quantity Specification 1. 500 Pcs/ 1Reel 2. 15 Reel /1 Box 3. 2 Box/ 1 Carton Label Form Specification RoHS CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: None HUE: None REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device NoDRX-205-139 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com http:\\www.everlight.com Prepared date:2006/04/06 Rev 1 Page: 10 of 10 Prepared by: Carryll Hsu