© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors
–
0805CS Series (2012)
Document 100-1
Document 100-1 Revised 10/06/08
• Exceptional Q values, even at high frequencies
• Tight tolerances – 2% for most; 1% for some values
Inductance2Percent SRF typ5DCR max6Irms7Color
Part number1(nH) tolerance3Q min4(MHz) (Ohms) (mA) code
0805CS-020XJL_ 2.8 @ 250 MHz 580 @ 1500 MHz 12200 0.06 800 Gray
0805CS-3N0XJL_ 3.0 @ 250 MHz 565 @ 1500 MHz 12200 0.06 800 White
0805CS-030XJL_ 3.3 @ 250 MHz 550 @ 1500 MHz 12200 0.08 600 Black
0805CS-050XJL_ 5.6 @ 250 MHz 565 @ 1000 MHz 5900 0.08 600 Orange
0805CS-060XJL_ 6.8 @ 250 MHz 550 @ 1000 MHz 5600 0.11 600 Brown
0805CS-070XJL_ 7.5 @ 250 MHz 550 @ 1000 MHz 4800 0.14 600 Green
0805CS-080X_L_ 8.2 @ 250 MHz 5,2 50 @ 1000 MHz 4400 0.12 600 Red
0805CS-100X_L_ 10 @ 250 MHz 5,2 60 @ 500 MHz 4300 0.10 600 Blue
0805CS-120X_L_ 12 @ 250 MHz 5,2 50 @ 500 MHz 4000 0.15 600 Orange
0805CS-150X_L_ 15 @ 250 MHz 5,2 50 @ 500 MHz 3200 0.17 600 Yellow
0805CS-180X_L_ 18 @ 250 MHz 5,2 50 @ 500 MHz 3100 0.20 600 Green
0805CS-220X_L_ 22 @ 250 MHz 5,2 55 @ 500 MHz 2600 0.22 500 Blue
0805CS-240X_L_ 24 @ 250 MHz 5,2 50 @ 500 MHz 2400 0.22 500 Gray
0805CS-270X_L_ 27 @ 250 MHz 5,2 55 @ 500 MHz 2580 0.25 500 Violet
0805CS-330X_L_ 33 @ 250 MHz 5,2,1 60 @ 500 MHz 2150 0.27 500 Gray
0805CS-360X_L_ 36 @ 250 MHz 5,2,1 55 @ 500 MHz 1900 0.27 500 Orange
0805CS-390X_L_ 39 @ 250 MHz 5,2,1 60 @ 500 MHz 2000 0.29 500 White
0805CS-430X_L_ 43 @ 200 MHz 5,2,1 60 @ 500 MHz 1800 0.34 500 Yellow
0805CS-470X_L_ 47 @ 200 MHz 5,2,1 60 @ 500 MHz 1700 0.31 500 Black
0805CS-560X_L_ 56 @ 200 MHz 5,2,1 60 @ 500 MHz 1600 0.34 500 Brown
0805CS-680X_L_ 68 @ 200 MHz 5,2,1 60 @ 500 MHz 1500 0.38 500 Red
0805CS-820X_L_ 82 @ 150 MHz 5,2,1 65 @ 500 MHz 1330 0.42 400 Orange
0805CS-910X_L_ 91 @ 150 MHz 5,2,1 65 @ 500 MHz 1330 0.48 400 Black
0805CS-101X_L_ 100 @ 150 MHz 5,2,1 65 @ 500 MHz 1250 0.46 400 Yellow
0805CS-111X_L_ 110 @ 150 MHz 5,2 50 @ 250 MHz 1100 0.48 400 Brown
0805CS-121X_L_ 120 @ 150 MHz 5,2,1 50 @ 250 MHz 1100 0.51 400 Green
0805CS-151X_L_ 150 @ 100 MHz 5,2,1 50 @ 250 MHz 920 0.56 400 Blue
0805CS-181X_L_ 180 @ 100 MHz 5,2,1 50 @ 250 MHz 920 0.64 400 Violet
0805CS-221X_L_ 220 @ 100 MHz 5,2 50 @ 250 MHz 820 0.70 400 Gray
0805CS-241X_L_ 240 @ 100 MHz 5,2 44 @ 250 MHz 770 1.00 350 Red
0805CS-271X_L_ 270 @ 100 MHz 5,2 48 @ 250 MHz 730 1.00 350 White
0805CS-331X_L_ 330 @ 100 MHz 5,2 48 @ 250 MHz 650 1.40 310 Black
0805CS-391X_L_ 390 @ 100 MHz 5,2 48 @ 250 MHz 600 1.50 290 Brown
0805CS-471X_L_ 470 @ 50 MHz 5,2 33 @ 100 MHz 375 1.76 250 Violet
0805CS-561X_L_ 560 @ 25 MHz 5,2 23 @ 50 MHz 330 1.90 230 Orange
0805CS-681X_L_ 680 @ 25 MHz 5,2 23 @ 50 MHz 310 2.20 190 Green
0805CS-821X_L_ 820 @ 25 MHz 5,2 23 @ 50 MHz 310 2.35 180 Blue
1. When ordering, specify tolerance, termination and packaging codes:
0805CS-821XGLL
LL
LC
Tolerance: F =1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts
per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
• Wirewound construction provides the highest SRFs in 0805
size