© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors
–
0805CS Series (2012)
Document 100-1
Document 100-1 Revised 10/06/08
• Exceptional Q values, even at high frequencies
• Tight tolerances – 2% for most; 1% for some values
Inductance2Percent SRF typ5DCR max6Irms7Color
Part number1(nH) tolerance3Q min4(MHz) (Ohms) (mA) code
0805CS-020XJL_ 2.8 @ 250 MHz 580 @ 1500 MHz 12200 0.06 800 Gray
0805CS-3N0XJL_ 3.0 @ 250 MHz 565 @ 1500 MHz 12200 0.06 800 White
0805CS-030XJL_ 3.3 @ 250 MHz 550 @ 1500 MHz 12200 0.08 600 Black
0805CS-050XJL_ 5.6 @ 250 MHz 565 @ 1000 MHz 5900 0.08 600 Orange
0805CS-060XJL_ 6.8 @ 250 MHz 550 @ 1000 MHz 5600 0.11 600 Brown
0805CS-070XJL_ 7.5 @ 250 MHz 550 @ 1000 MHz 4800 0.14 600 Green
0805CS-080X_L_ 8.2 @ 250 MHz 5,2 50 @ 1000 MHz 4400 0.12 600 Red
0805CS-100X_L_ 10 @ 250 MHz 5,2 60 @ 500 MHz 4300 0.10 600 Blue
0805CS-120X_L_ 12 @ 250 MHz 5,2 50 @ 500 MHz 4000 0.15 600 Orange
0805CS-150X_L_ 15 @ 250 MHz 5,2 50 @ 500 MHz 3200 0.17 600 Yellow
0805CS-180X_L_ 18 @ 250 MHz 5,2 50 @ 500 MHz 3100 0.20 600 Green
0805CS-220X_L_ 22 @ 250 MHz 5,2 55 @ 500 MHz 2600 0.22 500 Blue
0805CS-240X_L_ 24 @ 250 MHz 5,2 50 @ 500 MHz 2400 0.22 500 Gray
0805CS-270X_L_ 27 @ 250 MHz 5,2 55 @ 500 MHz 2580 0.25 500 Violet
0805CS-330X_L_ 33 @ 250 MHz 5,2,1 60 @ 500 MHz 2150 0.27 500 Gray
0805CS-360X_L_ 36 @ 250 MHz 5,2,1 55 @ 500 MHz 1900 0.27 500 Orange
0805CS-390X_L_ 39 @ 250 MHz 5,2,1 60 @ 500 MHz 2000 0.29 500 White
0805CS-430X_L_ 43 @ 200 MHz 5,2,1 60 @ 500 MHz 1800 0.34 500 Yellow
0805CS-470X_L_ 47 @ 200 MHz 5,2,1 60 @ 500 MHz 1700 0.31 500 Black
0805CS-560X_L_ 56 @ 200 MHz 5,2,1 60 @ 500 MHz 1600 0.34 500 Brown
0805CS-680X_L_ 68 @ 200 MHz 5,2,1 60 @ 500 MHz 1500 0.38 500 Red
0805CS-820X_L_ 82 @ 150 MHz 5,2,1 65 @ 500 MHz 1330 0.42 400 Orange
0805CS-910X_L_ 91 @ 150 MHz 5,2,1 65 @ 500 MHz 1330 0.48 400 Black
0805CS-101X_L_ 100 @ 150 MHz 5,2,1 65 @ 500 MHz 1250 0.46 400 Yellow
0805CS-111X_L_ 110 @ 150 MHz 5,2 50 @ 250 MHz 1100 0.48 400 Brown
0805CS-121X_L_ 120 @ 150 MHz 5,2,1 50 @ 250 MHz 1100 0.51 400 Green
0805CS-151X_L_ 150 @ 100 MHz 5,2,1 50 @ 250 MHz 920 0.56 400 Blue
0805CS-181X_L_ 180 @ 100 MHz 5,2,1 50 @ 250 MHz 920 0.64 400 Violet
0805CS-221X_L_ 220 @ 100 MHz 5,2 50 @ 250 MHz 820 0.70 400 Gray
0805CS-241X_L_ 240 @ 100 MHz 5,2 44 @ 250 MHz 770 1.00 350 Red
0805CS-271X_L_ 270 @ 100 MHz 5,2 48 @ 250 MHz 730 1.00 350 White
0805CS-331X_L_ 330 @ 100 MHz 5,2 48 @ 250 MHz 650 1.40 310 Black
0805CS-391X_L_ 390 @ 100 MHz 5,2 48 @ 250 MHz 600 1.50 290 Brown
0805CS-471X_L_ 470 @ 50 MHz 5,2 33 @ 100 MHz 375 1.76 250 Violet
0805CS-561X_L_ 560 @ 25 MHz 5,2 23 @ 50 MHz 330 1.90 230 Orange
0805CS-681X_L_ 680 @ 25 MHz 5,2 23 @ 50 MHz 310 2.20 190 Green
0805CS-821X_L_ 820 @ 25 MHz 5,2 23 @ 50 MHz 310 2.35 180 Blue
1. When ordering, specify tolerance, termination and packaging codes:
0805CS-821XGLL
LL
LC
Tolerance: F =1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts
per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
• Wirewound construction provides the highest SRFs in 0805
size
© Coilcraft, Inc. 2009
0805CS Series (2012)
Specifications subject to change without notice.
Please check our website for latest information.
Document 100-2
Document 100-2 Revised 10/06/08
Typical Q vs Frequency Typical L vs Frequency
J
H
A
B
overall
F
G
E
terminal
F
C
D
Terminal wraparound:
approx 0.015/0,38 both ends
Recommended
Land Pattern
I
I
ABCD
max max max ref E F G H IJ
0.090 0.068 0.060 0.020 0.050 0.020 0.040 0.070 0.040 0.030 inches
2,29 1,73 1,52 0,51 1,27 0,51 1,02 1,78 1,02 0,76 mm
1
10
100
1000
10 100 1000
Inductance (nH)
Frequency (MHz)
220 nH
100 nH
39 nH
15 nH
3.3 nH
12 nH
6.8 nH
3.3 nH
22 nH
39 nH
68 nH
120 nH
270 nH
10 100
Frequency (MHz)
Q Factor
1000 10,000
100
90
80
70
60
50
40
30
20
10
0
-40 -20 0 20 40 60 80 100 140120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
Irms Derating Designer’s Kit C303 contains 10 of each 5% part
Designer’s Kit C303-2 contains 10 of each 2% part
Core material Ceramic
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 10.2 – 11.6 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel; 7500 per 13″ reel. Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth
PCB washing Only pure water or alcohol recommended
