JANS 2N5152U3 and JANS 2N5154U3 Qualified Levels: JANSM, JANSD, JANSP, JANSL, JANSR, JANSF RADIATION HARDENED NPN POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/544 DESCRIPTION These RHA level 2N5152U3 and 2N5154U3 silicon transistor devices are military Radiation Hardness Assurance qualified up to a JANSF level for high-reliability applications. Microsemi also offers numerous other products to meet higher and lower power voltage regulation applications. Important: For the latest information, visit our website http://www.microsemi.com. U3 (SMD-0.5) Package FEATURES x JEDEC registered 2N5152 and 2N5154. x JANS RHA qualifications are available per MIL-PRF-19500/544. Also available in: TO-5 Package (long-leaded) JANS_2N5152L & JANS_2N5154L APPLICATIONS / BENEFITS TO-39 Package x High frequency operation. x Lightweight. x High-speed power-switching applications. x High-reliability applications. (leaded) JANS_2N5152 & JANS_2N5154 MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Reverse Pulse Energy (1) Collector Current (dc) Collector to base voltage (static), emitter open Collector to emitter voltage (static) base open Emitter to base voltage (static) collector open Steady-State Power Dissipation @ TA = +25 C Steady-State Power Dissipation @ TC = +25 C Symbol TJ and TSTG RJA RJC IC VCBO VCEO VEBO PD PD Value -65 to +200 175 10 15 2 100 80 5.5 1 10 Unit C C/W C/W mJ A V V V W W Notes: 1. This rating is based on the capability of the transistors to operate safely in the unclamped inductive load energy test circuit. MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 1 of 8 JANS 2N5152U3 and JANS 2N5154U3 MECHANICAL and PACKAGING x x x x x x CASE: Ceramic and gold over nickel plated steel. TERMINALS: Gold over nickel plated tungsten/copper. MARKING: Part number, date code, A = anode. POLARITY: See schematic on last page. WEIGHT: 0.9 grams. See Package Dimensions on last page. PART NOMENCLATURE JANSM 2N5152 U3 SMD Surface Mount Package Reliability Level JANSM - 3K Rads (Si) JANSD - 10K Rads (Si) JANSP - 30K Rads (Si) JANSL - 50K Rads (Si) JANSR - 100K Rads (Si) JANSF - 300K Rads (Si) Symbol Cobo ICEO ICEX IEBO hFE VCEO VCBO VEBO JEDEC type number (See Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Common-base open-circuit output capacitance. Collector cutoff current, base open. Collector cutoff current, circuit between base and emitter. Emitter cutoff current, collector open. Common-emitter static forward current transfer ratio. Collector-emitter voltage, base open. Collector-emitter voltage, emitter open. Emitter-base voltage, collector open. T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 2 of 8 JANS 2N5152U3 and JANS 2N5154U3 ELECTRICAL CHARACTERISTICS @ TA = +25 C unless otherwise noted. OFF CHARACTERISTICS Parameters / Test Conditions Collector-Emitter Breakdown Voltage IC = 100 mA, IB = 0 Emitter-Base Cutoff Current VEB = 4.0 V, IC = 0 VEB = 5.5 V, IC = 0 Collector-Emitter Cutoff Current VCE = 60 V, VBE = 0 VCE = 100 V, VBE = 0 Collector-Emitter Cutoff Current VCE = 40 V, IB = 0 Symbol Min. V(BR)CEO 80 Max. Unit V IEBO 1.0 1.0 A mA ICES 1.0 1.0 A mA ICEO 50 A Min. Max. Unit 20 50 30 70 20 40 --90 200 --- ON CHARACTERISTICS Parameters / Test Conditions Forward-Current Transfer Ratio IC = 50 mA, VCE = 5 V IC = 2.5 A, VCE = 5 V IC = 5A, VCE = 5V Symbol 2N5152U3 2N5154U3 2N5152U3 2N5154U3 2N5152U3 2N5154U3 Collector-Emitter Saturation Voltage IC = 2.5 A, IB = 250 mA IC = 5.0 A, IB = 500 mA Base-Emitter Voltage Non-Saturation IC = 2.5 A, VCE = 5 V Base-Emitter Saturation Voltage IC = 2.5 A, IB = 250 mA IC = 5.0 A, IB = 500 mA hFE VCE(sat) 0.75 1.5 V VBE 1.45 V VBE(sat) 1.45 2.2 V Max. Unit 250 pF DYNAMIC CHARACTERISTICS Parameters / Test Conditions Magnitude of Common Emitter Small-Signal ShortCircuit Forward Current Transfer 2N5152U3 Ratio 2N5154U3 IC = 500 mA, VCE = 5 V, f = 10 MHz Small-signal short Circuit Forward-Current Transfer Ratio 2N5152U3 2N5154U3 IC = 100 mA, VCE = 5 V, f = 1 KHz Output Capacitance VCB = 10 V, IE = 0, f = 1.0 MHz Symbol Min. |hfe| 6 7 hfe 20 50 Cobo T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 3 of 8 JANS 2N5152U3 and JANS 2N5154U3 ELECTRICAL CHARACTERISTICS @ TA = +25 C unless otherwise noted. (continued) SWITCHING CHARACTERISTICS Parameters / Test Conditions Turn-On Time IC = 5 A, IB1 = 500 mA Turn-Off Time RL = 6 Storage Time IB2 = -500 mA Fall Time Symbol Max. Unit ton 0.5 s toff 1.5 s tS 1.4 s tf 0.5 s VBE(OFF) = 3.7 V Min. SAFE OPERATING AREA (See SOA graph below and MIL-STD-750, method 3053) DC Tests TC = +25 C, tP = 1.0 s, 1 Cycle Test 1 VCE = 5.0 V, IC = 2.0 A Test 2 VCE = 32 V, IC = 310 mA Test 3 VCE = 80 V, IC = 12.5 mA IC - COLLECTOR CURRENT - A dc Operation TC < 25 C VCE - COLLECTOR - EMITTER VOLTAGE - V Maximum Safe Operating Area T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 4 of 8 JANS 2N5152U3 and JANS 2N5154U3 ELECTRICAL CHARACTERISTICS @ TA = +25 C, unless otherwise noted (continued) POST RADIATION ELECTRICAL CHARACTERISTICS Parameters / Test Conditions Symbol Collector to Emitter Cutoff Current VCE = 40 V Emitter to Base Cutoff Current VEB = 4 V Breakdown Voltage, Collector to Emitter IC = 100 mA Collector to Emitter Cutoff Current VCE = 60 V Emitter to Base Cutoff Current VEB = 5.5 V Forward-Current Transfer Ratio (1) IC = 50 mA, VCE = 5 V IC = 2.5 A, VCE = 5 V Base to Emitter voltage (non-saturated) VCE = 5 V, IC = 2.5 A, pulsed Collector-Emitter Saturation Voltage IC = 2.5 mA, IB = 250 mA, pulsed IC = 500 mA, IB = 500 mA, pulsed Base-Emitter Saturation Voltage IC = 2.5 A, IB = 250 mA, pulsed IC = 5 A, IB = 500 mA, pulsed Unit ICEO 100 A IEBO 2.0 A 80 V ICES 2.0 PA IEBO 2.0 mA 2N5152U3 [10] 2N5154U3 [25] 2N5152U3 IC = 5 A pulsed, VCE = 5 V Max. V(BR)CEO Min. [15] 90 2N5154U3 [35] 200 2N5152U3 [10] 2N5154U3 [20] [hFE] VBE 1.45 V VCE(sat) 0.86 1.73 V VBE(sat) 1.67 2.53 V (1) See method 1019 of MIL-STD-750 for how to determine [hFE] by first calculating the delta (1/hFE) from the preand post-radiation hFE. Notice the [hFE] is not the same as hFE and cannot be measured directly. The [hFE] value can never exceed the pre-radiation minimum hFE that it is based upon. T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 5 of 8 JANS 2N5152U3 and JANS 2N5154U3 DC Operation Maximum Rating (W) GRAPHS TC (C) (Case) DC Operation Maximum Rating (W) FIGURE 1 Temperature-Power Derating Curve TA (C) (Ambient) FIGURE 2 Temperature-Power Derating Curve T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 6 of 8 JANS 2N5152U3 and JANS 2N5154U3 Theta (oCW) GRAPHS (continued) Time (sec) FIGURE 3 Maximum Thermal Impedance (RJC) T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation Page 7 of 8 JANS 2N5152U3 and JANS 2N5154U3 PACKAGE DIMENSIONS NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. Symbol 1 BL BW CH LH LL1 LL2 LS1 LS2 LW1 LW2 Q1 Q2 Term 1 Term 2 Term 3 2 3 Schematic T4-LDS-0100-2 Rev. 2 (06/02/14) (c)2014 Microsemi Corporation DIMENSIONS INCH MILLIMETERS Min Max Min Max .395 .405 10.03 10.29 .291 .301 7.39 7.65 .112 .124 2.84 3.15 .010 .020 0.25 0.51 .220 .230 5.59 5.84 .115 .125 2.92 3.18 3.81 BSC .150 BSC 1.91 BSC .075 BSC .281 .291 7.14 7.39 .090 .100 2.29 2.54 .030 0.76 .030 0.76 Collector Base Emitter Page 8 of 8