J7KN-40 230 - OMRON - Datasheet.Directory

Motor Contactor J7KN 1

Motor Contactor

J7KN

• Range from 4 to 500 kW (AC 3, 380/415 V)

• AC and DC operated

• Integrated auxiliary contacts; integrated aux. contact of J7KN

contactors up to 11kW suitable for electronic circuits

• Screw fixing and snap fitting (35 mm DIN rail) up to 37 kW

• Compliant to the global standards

• Finger proof (BGV A2)

• System contactors for Fuseless Load Feeders with integrated

link modules

• All needed approvals like CE, UL, GOST & CCC. The J7KN

fulfills the following standards; IEC 947-4-1, VDE 0660 and

EN 60947-4-1.

• Accessories like auxiliary contacts front or/and side mounted,

mechanical interlock and suppressor units.

Model Number Legend

1. Motor Contactors

1) Motor Contactor

2) G for low DC control power consumption

3) Rated Motor Current.

D for integrated aux. contact for electronic circuits

(except for 4-pole versions)

4) Integrated auxiliary contact configuration

5) Coil voltage

6) D for DC coil supply

2. Aux. Contact Modules for Motor Contactors

1) Auxiliary Contact Modules

2) Motor contactors size

3) Combination of NO / NC contacts

4) Place of mounting

3. Accessories for Motor Contactors (Pneumatic Timers)

1) Accessories for Motor Contactor

2) Motor contactors size

3) Pneumatic Timer

4) Time range

5) Function

4. Accessories for Motor Contactors (Mechanical Interlock)

1) Accessories for Motor Contactor

2) Motor contactors size

3) Mechanical Interlock

5. Accessories for Motor Contactors (RS Suppressor units)

1) Accessories for Motor Contactor

2) Motor contactors size

3) RS-surge suppressors

4) Voltage

6. Accessories for Motor Contactors (RC Suppressor units)

1) Accessories for Motor Contactor

2) C2 = J7KN

3) RC = RC suppressor unit

4) Voltage

7. Accessories for Motor Contactors

(Additional Terminals and Terminal Covers)

1) Accessories for Motor Contactor

2) Version

8. Insulated wiring systems for Motor Contactors

1) Additional reference for LVSG

2) WKR = Wiring Kit Reverser;

WKSD = Wiring Kit Star Delta

3) Version

J7KN#-###-##-### #

132456

J73KN-#-##-##

1324

J74KN-#-##-##-##

13245

J74KN-#-##

132

J74KN-#-##-###

1342

J74KN-##-##-###

1342

J74KN-####

J74-WK##-##

123

2Motor Contactor J7KN

■Contactors

Ratings Rated

current

No. of

Poles

Control circuit

Power consum.

Aux. Contacts Partnumber

AC2, AC3 AC1 AC type VA Built-in Additional Type*1 Add.

suffix

for

DC type W front side Volt age 24

specification 48

110

230

types

coil

voltage

380 V

400 V

415 V

500 V

660 V

690 V

AInrush Hold NO NC

Number

of con-

tacts

Number

of con-

tacts D

45,5 5,5 25

333-45 7-10

1–

–

J7KN-10D-10 @@@

––1 J7KN-10D-01 @@@

4––J7KN-10D-4 @@@

333

1– J7KNG-10-10 @@@

–1 J7KNG-10-01 @@@

4––J7KNG-10-4 @@@

375 2 1–3J7KN-10D-10 @@@

–1 J7KN-10D-01 @@@

5,5 7,5 7,5 25

333-45 7-10

1–

–

J7KN-14D-10 @@@

––1 J7KN-14D-01 @@@

4––J7KN-14D-4 @@@

333

1– J7KNG-14-10 @@@

–1 J7KNG-14-01 @@@

4––J7KNG-14-4 @@@

375 2 1–3J7KN-14D-10 @@@

–1 J7KN-14D-01 @@@

7,5 10 10 32

333-45 7-10

1–

–

J7KN-18D-10 @@@

––1 J7KN-18D-01 @@@

4––J7KN-18D-4 @@@

333

1– J7KNG-18-10 @@@

–1 J7KNG-18-01 @@@

4––J7KNG-18-4 @@@

375 2 1–3J7KN-18D-10 @@@

–1 J7KN-18D-01 @@@

11 10 10 32

333-45 7-10

1–

–

J7KN-22D-10 @@@

––1 J7KN-22D-01 @@@

4––J7KN-22D-4 @@@

333

1– J7KNG-22-10 @@@

–1 J7KNG-22-01 @@@

4––J7KNG-22-4 @@@

375 2 1–3J7KN-22D-10 @@@

–1 J7KN-22D-01 @@@

J7KN-AC

J7KNG

J7KN-DC

11 15 15 50 3

90-115

9-13

––4

J7KN-24 @@@ –

44 J7KNG-24 @@@

140 2 3 J7KN-24 @@@

15 18,5 18,5 65 3

90-115

9-13

––4J7KN-32 @@@ –

44 J7KNG-32 @@@

140 2 3 J7KN-32 @@@

18,5 18,5 18,5 80 3

90-115

9-13

––4J7KN-40 @@@ –

44 J7KNG-40 @@@

140 2 3 J7KN-40 @@@

J7KN-AC

J7KN-DC

22 30 30 110 3

140-185

13-18 ––4

J7KN-50 @@@ –

200 6 3 J7KN-50 @@@ D

30 37 37 120 3

140-185

13-18 ––4J7KN-62 @@@ –

200 6 3 J7KN-62 @@@ D

37 45 45 130 3

140-185

13-18

––

4J7KN-74 @@@ –

200 6 3 J7KN-74 @@@ D

J7KN-AC

J7KNG

J7KN-DC

Motor Contactor J7KN 3

J7KN-90/115

45 55 55 160

190-

280 VA 2.5-5 VA

––7 4

J7KN-90 @@@

–

55 55 55 200 280 W 5 W J7KN-115 @@@

J7KN-151/176

75 75 75 230 3

350 5 – – 4 2

J7KN-151 @@@

–

4J7KN-151-4 @@@

90 90 90 250 3J7KN-176 @@@

4J7KN-176-4 @@@

J7KN-210 to 316

110 160 160 350

3 360 5 – – 4 4

J7KN-210 @@@

–132 210 210 450 J7KN-260 @@@

160 250 250 500 J7KN-316 @@@

J7KN-450 to 860

250 375 375 600

800-

950 VA 9-11 VA

224 –

J7KN-450-22 @@@

–

300 475 475 760 750-

850 W 8-10 W J7KN-550-22 @@@

400 630 630 1000 1350-

1600 VA

21-

25 VA J7KN-700-22 @@@

500 700 700 1100 1300-

1550 W 18-22 W J7KN-860-22 @@@

*1 For more coil voltages refer to Appendix.

Ratings Rated

current

No. of

Poles

Control circuit

Power consum.

Aux. Contacts Partnumber

AC2, AC3 AC1 AC type VA Built-in Additional Type*1 Add.

suffix

for

DC type W front side Voltage 24

specification 48

110

230

types

coil

voltage

380 V

400 V

415 V

500 V

660 V

690 V

AInrush Hold NO NC

Number

of con-

tacts

Number

of con-

tacts D

4Motor Contactor J7KN

■Additional products

Auxiliary Contacts Blocks

Pneumatic Timer

Mechanical Interlocks

Rated Operational Current Mounting + comments Contacts Suitable for

Contactors

Partnumer

AC15 AC15 AC1

230V 400V 690V

A A A NO NC Ty p e

3210

Front, standard version 1–

J7KN-10D up to

J7KN-115

J73KN-B-10*1

3210 –1 J73KN-B-01*1

3210

EM/LB version

(early make/late break)

1– J73KN-B-10U*1

3210 –1 J73KN-B-01U*1

6425

High current version 1– J73KN-B-10A*1

6425 –1 J73KN-B-01A*1

3210

Side version, max.

2 pcs per contactor 11J7KN-24 up to

J7KN-115 J73KN-C-11S*1

3210

Front version, max.

1 pcs per contactor

J7KN-151 up to

J7KN-316

J73KN-D-11F

3210 22 J73KN-D-22F

3210

Side version, max.

2 pcs per contactor 11J7KN-151 up to

J7KN-316 J73KN-D-11S

3210

Front version, max.

1 pcs per contactor 22J7KN-450 up to

J7KN-860 J73KN-E-22F

*1 Contacts suitable for electronic circuits, according to IEC60947-5-4 for rated voltage 24 VDC (test ratings 17 VDC, 5 mA). Positively guid-

ed contacts. Technical data see page 24.

Function Time range

Mounting +

comments

Contacts Suitable for Contactors Partnumber

Ty p eNO NC NO NC

On-delay 0.1 - 40

Front

11––

Front for contactors

J7KN-10D up to J7KN-40

J74KN-B-TP40DA

On-delay 10 - 180 1 1 – – J74KN-B-TP180DA

Off-delay 0.1 - 40 – – 1 1 J74KN-B-TP40IA

Off-delay 10 - 180 – – 1 1 J74KN-B-TP180IA

Interlocks contactors with contactors (dimensions need to be the same)

Type

Partnumber

Ty p e

J7KN(G)-10(D) - J7KN(G)-40 + J7KN(G)-10(D) - J7KN(G)-40 J74KN-B-ML

J7KN-24 - J7KN-74 + J7KN-24 - J7KN-74 J74KN-C-ML

J7KN-90 - J7KN-115 + J7KN-90 - J7KN-115 J74KN-D2-ML

J7KN-151 - J7KN-316 + J7KN-151 - J7KN-316 J74KN-E-ML

Motor Contactor J7KN 5

Suppressor units

Additional products

Insulated wiring systems for motor contactors

Function For Contactors Voltages Partnumber

Type

RC-Unit snap on contactor J7KN-10D - J7KN-74 12 - 48 V AC/DC

48 - 127 V AC/DC

110 - 230 V AC/DC

230 - 415 V AC/DC

J74KN-C2-RC24

J74KN-C2-RC110

J74KN-C2-RC230

J74KN-C2-RC400

Function For Contactors Specification Partnumber

Cable Cross-section to clamp mm2

solid or

stranded flexible

flex. with

multicore

cable end Typ e

Terminals single pole J7KN-50 - J7KN-74 4 - 35 6 - 25 4 - 25 J74KN-LG-9030

(3pcs set)

J7KN-151 - J7KN-176 16 - 120 – 16 - 95 J74KN-LG-11224

Terminal cover for

terminal protection according

DIN 57106, BVG-A2

J7KN-151 - J7KN-176

3-pole

for 3 terminals; 2 units for one con-

tactor

J74KN-LG-10404

J7KN-210 - J7KN-316 J74KN-LG-11457

Marking system for contactors

and aux. contactblocks

J7KN-10 to J7KN-74

& J73KN-B

2-section without marking,

divisible

J74KN-P487-1

4-section without marking,

divisible

J74KN-P245-1

Function For Contactors Specification Partnumber

Maximum current Type

For reversing contactors

(2 parts)

J7KN-10D - J7KN-22D 22 J74-WKR-B2

J7KN-24 - J7KN-40 40 J74-WKR-C

For star-delta combination

(4 parts)

J7KN-10D - J7KN-22D 22 J74-WKSD-B2

J7KN-24 - J7KN-40 40 J74-WKSD-C

6Motor Contactor J7KN

Wiring Diagrams Coil Circuit / Terminal marking

Contactors

Range Supply Wiring coil circuit Terminal marking

J7KN-10D/14D/18D/22D-10 AC

J7KN-10D/14D/18D/22D-01 AC

J7KNG-10/14/18/22-10 DC

J7KNG-10/14/18/22-01 DC

J7KN-10D/14D/18D/22D-10…D DC with double wiring coil

J7KN-10D/14D/18D/22D-01…D DC with double wiring coil

J7KN-10D/14D/18D/22D-4 AC

J7KNG-10/14/18/22-4 DC

J7KN-24/32/40/50/62/74 AC

J7KNG-24/32/40 DC

J7KN-24/32/40/50/62/74D DC with double wiring coil

J7KN-90/115/151/176

J7KN-210/260/316

AC/DC

J7KN- 151/176-4 AC/DC

J7KN- 450/550/700/860 AC/DC

A2-

A1+

A2-

A1+

A2-

A1+

A2-

A1+

Motor Contactor J7KN 7

Auxiliary Contacts

Pneumatic timer

■Coil voltage

Type-suffix for Contactors

Operating range of magnet-coils:

AC: 0.85 x Us (min. value of rated control voltage) up to 1.1 x Us (max. value of rated control voltage).

DC: 0.8 x Us (min. value of rated control voltage) up to 1.1 x Us (max. value of rated control voltage).

Range Contactors Terminal marking

J73KN-B-10 J7KN-10D/14D/18D/22D/24/32/40/50/62/74/90/115

J7KNG-10/14/18/22/24/32/40

J73KN-B-01 (U/A) J7KN-24/32/40/50/62/74/90/115

J7KNG-24/32/40

J73KN-C-11S J7KN-10D/14D/18D/22D/24/32/40/50/62/74/90/115

J7KNG-10/14/18/22/24/32/40

J73KN-D-11F J7KN-151 up to J7KN-316

J73KN-D-22F J7KN-151 up to J7KN-316

J73KN-D-11S J7KN-151 up to J7KN-316

J73KN-E-22F J7KN-450 up to J7KN-860

Range Contactors Terminal marking

J73KN-B-TP…DA

ON-delay

J7KN-10D/14D/18D/22D/24/32/40

J7KNG-10/14/18/22/24/32/40

J73KN-B-TP…IA

OFF-delay

J7KN-10D/14D/18D/22D/24/32/40

J7KNG-10/14/18/22/24/32/40

Contactor range Suffix Marking at coil Rated Control Voltage Us

50Hz 60Hz 50Hz 60Hz

VVmin V max V min V max V

J7KN-10D to J7KN-74

24 24 24 22 24 24 27

48 48 48 44 48 48 52

110 110 110-120 100 110 110 122

180 180-210 200-240 180 210 200 240

230 220-240 230-264 220 240 230 264

400 380-415 400-440 380 415 400 460

500 500-550 550-600 500 550 550 600

J7KN-90 to J7KN-860

24 24 24 24 24 24 24

48 48 48 48 48 48 48

110 110-120 110-120 110 120 110 120

230 220-240 220-240 220 240 220 240

400 380-415 380-415 380 415 380 415

5361

54 62

71 83

72 84

(left side) (right side)

5361

54 62

8Motor Contactor J7KN

■Engineering data and characteristics

Approximate Values for three-phase Motors

Motor Full Load Currents

Approximate values of motor F.L.C. and minimum „slow blow“ respectively „gL“ short-circuit fuse

The motor F.L.C. be valid for standard internal and surface cooled three-pole motors with 1500 min-1. The fuses values be valid for the motor F.L.C. shown in the table

and D.O.L.-start: starting current max. 6x motor F.L.C., starting time max. 5s; star-delta-start: starting current max. 2x motor F.L.C., starting time max. 15s. For motors

with higher F.L.C., higher starting current and / or longer starting time, larger short-circuit fuses are required.

The maximum admissible value is dependent on the switchgear respectively thermal overload relay.

Motor rating 220-230V Motor 240V Motor 380-400V Motor 415V Motor 500V Motor 660-690V Motor

Range according to BS for 415V Value of fusing at

motor start

Value of fusing at

motor start

Value of fusing at

motor start

Value of fusing at

motor start

Value of fusing at

motor start

Value of fusing at

motor start

kW PS~hp hp cos %

F. L . C.

D.O.L.

F. L . C .

D.O.L.

F. L . C .

D.O.L.

F. L . C .

D.O.L.

F. L . C.

D.O.L.

F. L . C .

D.O.L.

0.06 0.08 - 0.7 59 0.38 1 1 0.35 1 1 0.22 11- - -0.1611- - -

0.09 0.12 - 0.7 60 0.55 2 2 0.5 2 2 0.33 11- - -0.2411- - -

0.12 0.16 - 0.7 61 0.76 2 2 0.68 2 2 0.42 22- - -0.3311- - -

0.18 0.24 - 0.7 61 1.1 2 2 1 2 2 0.64 22- - -0.4611- - -

0.25 0.34 - 0.7 62 1.4 4 2 1.38 4 2 0.88 22- - -0.5922- - -

0.37 0.5 - 0.72 64 2.1 4 4 1.93 4 4 1.22 42- - -0.85220.722

0.55 0.75 - 0.75 69 2.7 4 4 2.3 4 4 1.5 42- - -1.2420.922

0.75 1 1 0.8 74 3.3 6 4 3.1 6 4 24 42 4 41.484 21.12 2

1.1 1.5 1.5 0.83 77 4.9 10 6 4.1 6 6 2.6 442.5442.1441.542

1.5 2 2 0.83 78 6.2 10 10 5.6 10 10 3.5 643.5642.6442 44

2.2 3 3 0.83 81 8.7 16 10 7.9 16 10 510 65 10 63.86 62.96 4

2.5 3.4 - 0.83 81 9.8 16 16 8.9 16 10 5.7 1010---4.366---

3 4 4 0.84 81 11.6 20 16 10.6 20 16 6.6 16 10 6.5 16 10 5.1 10 10 3.5 6 4

3.75 5 0.848214.2252013 2516 8.2 16 10 7.5 16 10 6.2 16 10 - - -

4 5.5 - 0.84 82 15.3 25 20 14 25 20 8.5 16 10 - - - 6.5 16 10 4.9 10 6

5.5 7.5 7.5 0.85 83 20.6 35 25 18.9 35 25 11.5 20 16 11 20 16 8.9 16 10 6.7 16 10

7.51010 0.868527.4353524.8353515.5 25 20 14 25 16 11.9 20 16 9 16 10

8 11 - 0.86 85 28.8 50 35 26.4 35 35 16.7 25 20 - - - 12.7 20 16 - - -

11 15 15 0.86 87 39.2 63 50 35.3 50 50 22 35 25 21 35 25 16.7 25 20 13 25 16

12.5 17 - 0.86 87 43.8 63 50 40.2 63 50 25 35 35 - - - 19 35 25 - - -

15 20 20 0.86 87 52.6 80 63 48.2 80 63 30 50 35 28 35 35 22.5 35 25 17.5 25 20

18.5 25 25 0.86 88 64.9 100 80 58.7 80 63 37 63 50 35 50 50 28.5 50 35 21 35 25

20 27 - 0.86 88 69.3 100 80 63.4 80 80 40 63 50 - - - 30.6 50 35 - - -

22 30 30 0.87 89 75.2 100 80 68 100 80 44 63 50 40 63 50 33 50 50 25 35 35

25 34 - 0.87 89 84.4 125 100 77.2 100 100 50 80 63 - - - 38 63 50 - - -

30 40 40 0.87 90 101 125 125 92.7 125 100 60 80 63 55 80 63 44 63 50 33 50 35

37 50 50 0.87 90 124 160 160 114 160 125 72 100 80 66 100 80 54 80 63 42 63 50

40 54 - 0.87 90 134 160 160 123 160 160 79 100 100 - - - 60 80 63 - - -

45 60 60 0.88 91 150 200 160 136 200 160 85 125 100 80 100 100 64.5 100 80 49 63 63

51 70 - 0.88 91 168 200 200 154 200 200 97 125 100 - - - 73.7 100 80 - - -

55 75 - 0.88 91 181 250 200 166 200 200 105 160 125 - - - 79 125 100 60 80 63

59 80 80 0.88 91 194 250 250 178 250 200 112 160 125 105 160 125 85.3 125 100 - - -

75 100 100 0.88 91 245 315 250 226 315 250 140 200 160 135 200 160 106 160 125 82 125 100

90 125 125 0.88 92 292 400 315 268 315 315 170 250 200 165 200 200 128 160 160 98 125 125

110 150 150 0.88 92 358 500 400 327 400 400 205 250 250 200 250 250 156 200 200 118 160 125

129 175 175 0.88 92 420 500 500 384 500 400 242 315 250 230 315 250 184 250 200 - - -

132 180 - 0.88 92 425 500 500 393 500 500 245 315 250 - - - 186 250 200 140 200 160

147 200 200 0.88 93 472 630 630 432 630 500 273 315 315 260 315 315 207 250 250 - - -

160 220 - 0.88 93 502 630 630 471 630 630 295 400 315 - - - 220 315 250 170 200 200

184 250 250 0.88 93 590 800 630 541 630 630 340 400 400 325 400 400 259 315 315 - - -

200 270 - 0.88 93 626 800 800 589 800 630 370 500 400 - - - 278 315 315 215 250 250

220 300 300 0.88 93 700 1000 800 647 800 800 408 500 500 385 500 400 310 400 400 - - -

250 340 - 0.88 93 803 1000 1000 736 1000 800 460 630 500 - - - 353 500 400 268 315 315

257 350 350 0.88 93 826 1000 1000 756 1000 800 475 630 630 450 630 500 363 500 400 - - -

295 400 400 0.88 93 948 1250 1000 868 1000 1000 546 800 630 500 630 630 416 500 500 - - -

315 430 - 0.88 93 990 1250 1250 927 1250 1000 580 800 630 - - - 445 630 500 337 400 400

355 483 - 0.89 95 - - - - - - 636 800 800 - - - 483 630 630 366 500 400

400 545 - 0.89 96 - - - - - - 710 1000 800 - - - 538 630 630 410 500 500

Motor Contactor J7KN 9

Approximate values of motor F.L.C. according to CSA and UL

Motor

rating

Motor F.L.C. at 110-120V Motor F.L.C. at 220-240V*1

*1 Determine the motor current for 200V and 208V by increasing the values for 220-240V at 200V about 15% and for 208V about 10%.

Motor F.L.C. at 440-480V Motor F.L.C. at 550-600V

1-phase 2-phase 3-phase 1-phase 2-phase 3-phase 1-phase 2-phase 3-phase 1-phase 2-phase 3-phase

hp AAAAAAAAAAAA

½ 9.8 4.0 4.4 4.9 2.0 2.2 2.5 1.0 1.1 2.0 0.8 0.9

¾ 13.8 4.8 6.4 6.9 2.4 3.2 3.5 1.2 1.6 2.8 1.0 1.3

1 16.0 6.4 8.4 8.0 3.2 4.2 4.0 1.6 2.1 3.2 1.3 1.7

1½ 20.0 9.0 12.0 10.0 4.5 6.0 5.0 2.3 3.0 4.0 1.8 2.4

2 24.0 11.8 13.6 12.0 5.9 6.8 6.0 3.0 3.4 4.8 2.4 2.7

3 34.0 16.6 19.2 17.0 8.3 9.6 8.5 4.2 4.8 6.8 3.3 3.9

5 56.0 26.4 30.4 28.0 13.2 15.2 14.0 6.6 7.6 11.2 5.3 6.1

7½ 80.0 38.0 44.0 40.0 19.0 22.0 21.0 9.0 11.0 16.0 8.0 9.0

10 100.0 48.0 56.0 50.0 24.0 28.0 26.0 12.0 14.0 20.0 10.0 11.0

15 135.0 72.0 84.0 68.0 36.0 42.0 34.0 18.0 21.0 27.0 14.0 17.0

20 - 94.0 108.0 88.0 47.0 54.0 44.0 23.0 27.0 35.0 19.0 22.0

25 - 118.0 136.0 110.0 59.0 68.0 55.0 29.0 34.0 44.0 24.0 27.0

30 - 138.0 160.0 136.0 69.0 80.0 68.0 35.0 40.0 54.0 28.0 32.0

40 - 180.0 208.0 176.0 90.0 104.0 88.0 45.0 52.0 70.0 36.0 41.0

50 - 226.0 260.0 216.0 113.0 130.0 108.0 56.0 65.0 86.0 45.0 52.0

60----133.0 145.0 - 67.0 77.0 - 53.0 62.0

75----166.0 192.0 - 83.0 96.0 - 66.0 77.0

100----218.0 248.0 - 109.0 124.0 - 87.0 99.0

125-----312.0 - 135.0 156.0 - 108.0 125.0

150-----360.0 - 156.0 180.0 - 125.0 144.0

200-----480.0 - 208.0 240.0 - 167.0 192.0

250-----602.0 - - 302.0 - - 242.0

300--------361.0--289.0

350--------414.0--336.0

400--------477.0--382.0

500--------590.0--472.0

10 Motor Contactor J7KN

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Main Contacts Type

J7KN(G)-10(D) J7KN(G)-14(D) J7KN(G)-18(D) J7KN(G)-22(D)

J7KN(G)-24 J7KN(G)-32 J7KN(G)-40 J7KN-50

Rated insulation voltage Ui*1

*1 Suitable at 690V for: earthed-neutral systems, overvoltage I to IV, pollution degree 3 (standard-industry): Uimp = 8kV.

Data for other conditions on request.

V AC 690 690 690 690 690 690 690 690

Making capacity Ieff at Ue =

690V AC

A 200 200 200 200 400 500 500 700

Breaking capacity Ieff 400V AC A 180 180 200 200 380 400 400 600

J7KN-09 to J7KN-22

cos



= 0,65

500V AC A 150 150 180 180 300 370 370 500

J7KN-24 to J7KN-860

cos



= 0,35

690V AC A 100 100 150 150 260 340 340 400

1000V AC A ––––––––

Utilization category AC1

Switching of resistive load

Rated operational current

Ie (=Ith) at 40°C, open

690V A 25253232506580110

Rated operational power

of three-phase resistive

loads

50-60Hz, cos = 1

220V kW 9,5 9,5 12,2 12,2 19,0 24,7 30,4 41,9

230V kW 9,9 9,9 12,7 12,7 19,9 25,9 31,8 43,8

240V kW 10,4 10,4 13,3 13,3 20,8 27,0 33,2 45,7

380V kW 16,4 16,4 21,0 21,0 32,9 42,7 52,6 72,3

400V kW 17,3 17,3 22,1 22,1 34,6 45,0 55,4 76,1

415V kW 17,9 17,9 23,0 23,0 35,9 46,7 57,4 79,0

440V kW 19,0 19,0 24,4 24,4 38,1 49,5 60,9 83,7

500V kW 21,6 21,6 27,7 27,7 43,3 56,2 69,2 95,2

660V kW 28,5 28,5 36,5 36,5 57,1 74,2 91,3 125,6

690V kW 29,8 29,8 38,2 38,2 59,7 77,6 95,5 131,3

1000VkW––––––––

Rated operational current

Ie (=Ithe) at 60°C, enclosed

690VA 2525323240556590

Rated operational power

of three-phase resistive

loads

50-60Hz, cos = 1

220V kW 9,5 9,5 12,2 12,2 15,2 20,9 24,7 34,3

230V kW 9,9 9,9 12,7 12,7 15,9 21,9 25,9 35,8

240V kW 10,4 10,4 13,3 13,3 16,6 22,8 27,0 37,4

380V kW 16,4 16,4 21,0 21,0 26,3 36,2 42,7 59,2

400V kW 17,3 17,3 22,1 22,1 27,7 38,1 45,0 62,3

415V kW 17,9 17,9 23,0 23,0 28,7 39,5 46,7 64,6

440V kW 19,0 19,0 24,4 24,4 30,4 41,9 49,5 68,5

500V kW 21,6 21,6 27,7 27,7 34,6 47,6 56,2 77,9

660V kW 28,5 28,5 36,5 36,5 45,7 62,8 74,2 102,8

690V kW 29,8 29,8 38,2 38,2 47,7 65,7 77,6 107,4

1000VkW––––––––

Minimum cross-section of conductor

at load with Ie (=Ith)

mm²446610162535

Utilization category AC2 and AC3

Switching of three-phase motors

Rated operational current I

open and enclosed

220VA 1215182224304050

230VA11,514,5182224304050

240VA 1114182224324050

380-400V A 10 14 18 22 24 32 40 50

415V A 9 14 18 22 23 30 40 50

440V A 9 14 18 22 23 30 40 50

500VA 799917,5212133

660-690V A 6,5 8,5 8,5 8,5 17 20 20 31

1000VA ––––––––

Rated operational power

of three-phase motors

50-60Hz

220-230V kW 345668,51112,5

240VkW34577911,513,5

380-400V kW 4 5,5 7,5 11 11 15 18,5 22

415VkW4,5 68,51212162024

440VkW4,5 68,51212162024

500V kW 5,5 7,5 10 10 15 18,5 18,5 30

660-690V kW 5,5 7,5 10 10 15 18,5 18,5 30

1000VkW––––––––

Motor Contactor J7KN 11

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Type J7KN-62 J7KN-74 J7KN-90 J7KN-115 J7KN-151 J7KN-176 J7KN-210 J7KN-260 J7KN-316 J7KN-450 J7KN-550 J7KN-700 J7KN-860

V~ 690 690 1000 1000 1000 1000 1000 1000 1000 1000 1000 690 690

A 900 900 1100 1200 1500 2000 2100 2600 3200 4500 5500 7000 8600

A 800 800 950 1100 1200 1500 1600 2100 2600 4500 5500 7000 8000

A 700 700 850 1000 1200 1500 1600 2100 2600 4500 5500 7000 8000

A 500 500 600 600 1000 800 1200 1900 2300 3200 4400 5600 6900

A––––5006007008501000––––

A 120 130 160 200 230 250 350 450 500 700 760 1000 1100

kW 45,7 49,5 60 76 87 95 133 171 190 266 289 381 419

kW 47,7 51,7 63 79 91 99 139 179 199 279 302 398 438

kW 49,8 54,0 66 83 95 103 145 187 207 291 315 415 457

kW 78,9 85,5 105 131 151 164 230 296 329 460 500 658 724

kW 83,0 90,0 110 138 159 173 242 311 346 485 426 692 762

kW 86,2 93,3 115 143 165 179 251 323 359 503 546 718 790

kW 91,3 99,0 121 152 175 190 266 342 381 533 579 762 838

kW 103,8 112,5 138 173 199 216 303 389 453 606 658 866 952

kW 137,0 148,4 182 228 262 285 400 514 571 800 868 1143 1257

kW 143,2 155,2 191 239 274 298 418 537 597 836 908 1195 1314

kW – – 221 277 318 346 433 546 606 692 866 – –

A 100 110 120 135 180 200 280 360 400 550 600 800 875

kW 38,1 41,9 45 51 68 76 106 137 152 209 228 304 333

kW 39,8 43,8 47 53 71 79 111 143 159 219 239 318 348

kW 41,5 45,7 49 56 74 83 116 150 166 228 249 332 363

kW 65,7 72,3 78 88 118 131 184 237 263 362 395 526 575

kW 69,2 76,1 83 93 124 138 193 249 277 381 415 554 606

kW 71,8 79,0 86 97 129 143 201 259 287 395 431 575 628

kW 76,1 83,7 91 102 137 152 213 274 304 419 457 609 666

kW 86,5 95,2 103 116 155 173 242 312 346 476 519 692 757

kW 114,2 125,6 137 154 205 228 320 412 457 628 685 914 1000

kW 119,4 131,3 143 161 215 239 334 430 478 657 717 956 1045

kW – – 166 187 277 346 388 499 554 692 866 – –

mm250 50 70 95 95 120 240 2x150 2x(30x6) 2x(40x5) 2x(50x5) 2x(60x5) 2x(60x6)

A 63 74 90 115 150 175 210 260 315 450 550 700 860

A 62 74 90 115 150 175 210 260 315 450 550 700 860

A 42 42 60 60 150 175 210 260 315 450 550 700 860

A 40 40 58 58 120 140 150 180 240 400 500 630 700

A – – 58 58 60 70 85 100 125 200 250 – –

kW 18,5 22 25 33 40 50 60 75 90 132 175 225 280

kW 19 23 27 35 45 55 65 80 100 140 185 235 290

kW 30 37 45 55 75 90 110 132 160 250 300 400 500

kW 33 40 49 63 80 95 115 140 180 257 315 415 515

kW 33 40 49 63 85 100 125 150 190 270 335 450 530

kW 37 45 55 55 90 100 132 160 210 300 375 500 600

kW 37 45 55 55 110 132 132 160 210 375 500 630 700

kW – – 55 55 75 90 110 132 160 280 355 – –

12 Motor Contactor J7KN

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Main Contacts Type

J7KN(G)-10(D) J7KN(G)-14(D) J7KN(G)-18(D) J7KN(G)-22(D)

J7KN(G)-24 J7KN(G)-32 J7KN(G)-40 J7KN-50

Utilization category AC4

Switching of squirrel

cage motors, inching

Rated operational current I

open and enclosed

220VA1215181824304050

230V A 11,5 14,5 18 18 24 30 40 50

240VA1114181824324050

380-400V A 10 14 18 18 24 32 40 50

415V A 9 14 18 18 23 30 37 45

440V A 9 14 18 18 23 30 37 45

500V A 9 12 16 16 17,5 21 21 33

660-V A 7 9 9 9 17 20 20 31

690V A 6,5 8,5 8,5 8,5 17 20 20 31

1000VA––––––––

Rated operational power

of three-phase motors

50-60Hz

220-230V kW 3 4 5568,51112,5

240VkW34557911,513,5

380-400V kW 4 5,5 7,5 7,5 11 15 18,5 22

415V kW 4,5 6 8,5 8,5 12 16 20 24

440V kW 4,5 6 8,5 8,5 12 16 20 24

500V kW 5,5 7,5 10 10 15 18,5 18,5 30

660-690V kW 5,5 7,5 10 10 15 18,5 18,5 30

1000VkW––––––––

Utilization category AC5a

Switching of gas

discharge lamps

Rated operational current I

per pole at 220/230V

Fluorescent lamps,

uncompensated and

serial compensated

A202025254052648896

parallel compensated

A7 9 9 9 18222230

dual-connection

A22,522,5282845587298

Metal halide lamps

*1 Metal halide lamps and sodium-vapour lamps (high- and low-pressure lamps)

uncompensated

A1215191930394866

parallel compensated A 7 9 9 9 18 22 22 30

Mercury-vapour lamps

*2 High-pressure lamps

uncompensated

A22,525282845587299

parallel compensated

A7 9 9 9 18222230

Mixed light lamps

*3 Blended lamps, containing a mercury high-pressureunit and a tungsten helix in a fluorescent glass bulb (daylight lamps)

A2020252540526488

Utilization category AC5b

Switching of incandescent lamps

*4 Current inrush approx. 16 x le

Rated operational current I

per pole at 220/230V A 12,5 12,5 12,5 12,5 25 31 31 43

Motor Contactor J7KN 13

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Type J7KN-62 J7KN-74 J7KN-90 J7KN-115 J7KN-151 J7KN-176 J7KN-210 J7KN-260 J7KN-316 J7KN-450 J7KN-550 J7KN-700 J7KN-860

A 63 63 85 98 55 63 85 100 120 150 180 230 280

A 62 62 85 98 55 63 85 100 120 150 180 230 280

A 62 62 85 85 55 63 85 100 120 150 180 230 280

A 60 60 85 85 55 63 85 100 120 150 180 230 280

A 55 55 85 85 55 63 85 100 120 150 180 230 280

A42428585–––––––––

A40406060–––––––––

A404057,557,5–––––––––

A–––––––––––––

kW18,518,525301518,525303745516880

kW1919273215,51926313847537183

kW 30 30 45 45 25 30 45 55 63 75 90 120 150

kW 33 33 49 49 25 33 45 55 65 80 100 132 160

kW 33 33 49 49 30 34 48 55 67 85 100 132 160

kW 37 37 55 55 25 30 55 65 75 100 110 150 185

kW––––––––––––

A 104 – 100 120 120 140 180 220 280 360 450 570 700

A 40 45 55 70 85 100 130 160 200 300 360 460 550

A 108 117 112 144 120 140 180 220 280 360 450 570 700

A 72 78 85 90 95 110 140 180 230 300 380 490 610

A 40 45 55 70 75 85 110 140 170 260 300 400 480

A 108 117 112 144 120 140 180 220 280 360 450 570 700

A 40 45 55 70 75 85 110 140 170 260 300 400 480

A 96 104 100 120 100 120 160 200 250 320 400 500 600

A 56 56 69 75 100 120 160 190 220 260 315 440 500

14 Motor Contactor J7KN

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Main Contacts Type

J7KN(G)-10(D) J7KN(G)-14(D) J7KN(G)-18(D) J7KN(G)-22(D)

J7KN(G)-24 J7KN(G)-32 J7KN(G)-40 J7KN-50

Utilization category AC6a

Transformer primary switching

at inrush

Rated operational current l

n 3030303030303030

400V A 4,5 5,5 7,5 7,5 10,5 13,5 13,5 20

Rated operational power

dependent on inrush n

220-230V kVA 138 2,2 3 3 4,2 5,4 5,4 8

200V kVA 1,9 2,3 3,1 3,1 4,3 5,6 5,6 8,3

380-400V kVA 3,1 3,8 5,2 5,2 7,3 9,3 9,3 13,5

For different inrush-factors x

use the following formula:

Px=Pn*(n/x)

415-440V- kVA 3,4 4,2 5,7 5,7 8 10,2 10,2 15

500V kVA 3,9 4,8 6,5 6,5 9 11,5 11,5 17

660-690V kVA 5,4 6,5 9 9 12,5 16 16 24

Utilization category AC6b

Switching of three-phase capacitors

Maximum inrush current (peak value)

as multiple k of the capacitor rated

current k

35 25 20 20 25 25 25 25

Rated operational I

500V A 81215,515,523323245

Rated operational power

(sin



220-230V kVAr 34,5 6 68,5121217

240V kVAr 3,5 5 6,5 6,5 9,5 13 13 18,5

380-400V kVAr 5 7,5 10 10 15 20 20 29

For different multiples x

use the following formula:

Px=Pk*(k/x)

415-440V kVAr 5,5 8 11 11 16 22 22 32

500V kVAr 710131320262639

660-690V kVAr 710131320262640

Switching of reactive capacitor banks

Rated operational current l

690V A 8 13 18 20 28 36 42 48

Rated operational power

220-230V kVAr 2,9 5 7 7,5 11 14 16 20

240V kVAr 3,1 5,4 7 8 11 14 17 20

380-400V kVAr 5 9 12,5 13 20 25 27,5 33,3

415-440V kVAr 5,5 9,5 13 14 22 27 30 36

500VkVAr611151725303640

660-690V kVAr 815202233414855

750(850)V

kVAr ––––––––

Utilization category DC1

Switching of resistive load

Time constant L/R



1ms

Rated operational current l

1 pole 24V

20 25 32 32 50 65 80 110

60V

A20 25 32 32 50 65 80 110

110V

A666610101012

220V

A0,8 0,8 0,8 0,8 1,4 1,4 1,4 1,4

3 poles in series

24V A 20 25 32 32 50 65 8/0 110

60VA 20253232506580110

110V A 20 25 32 32 50 65 80 110

220V A 16 20 20 20 30 35 35 63

Utilization category DC3 and DC5

Switching of shunt motors

and series motors

Time constant L/R



15ms

Rated operational current l

1 pole 24V

20 25 32 32 50 65 80 110

60V

A666630303060

110V

A1,2 1,2 1,2 1,2 1,8 1,8 1,8 1,8

220V

A0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,25

3 poles in series

24V A 20 25 32 32 50 65 80 110

60VA 2025323240404080

110V A 20 20 20 20 40 40 40 80

220V A 2,5 2,5 2,5 2,5 4 4 4 5

Motor Contactor J7KN 15

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Type J7KN-62 J7KN-74 J7KN-90 J7KN-115 J7KN-151 J7KN-176 J7KN-210 J7KN-260 J7KN-316 J7KN-450 J7KN-550 J7KN-700 J7KN-860

n 30303030303030303030303030

A 27 33 38 50 65 80 90 120 142 203 248 315 390

kVA10,713152025303445547795120148

kVA 11,2 13,5 15,5 20,5 27 33 37 50 59 80 100 130 160

kVA 18,5 22,5 26 34 45 55 60 80 95 140 170 210 270

kVA 20,5 25 29 38 46 57 63 85 100 145 175 220 280

kVA 23 28 33 43 55 69 75 100 120 170 210 270 330

kVA 32 39 45 60 56 69 100 135 160 200 250 320 350

25 20 20 20 20 20 25 20 20 20 20 20 20

A60 70 87 100 120 155 195 225 255 300 370 440 520

kVAr 24 28 33 38 45 60 75 90 100 115 145 170 200

kVAr 25 29 36 42 52 62 78 94 104 120 150 175 205

kVAr 39 46 57 65 80 100 130 155 170 200 250 300 350

kVAr 43 50 60 70 95 110 135 165 175 210 260 310 360

kVAr 50 58 70 80 100 130 170 194 220 260 320 380 450

A 72 108*1

*1 Consider resistive load (lth). See page 10.

98 105 115 140 200 225 250 330 420 550 600

kVAr 28 33 35 40 43 53 76 85 95 125 160 209 228

kVAr 28 36 39 43 45 55 80 90 100 130 170 220 240

kVAr 50 75*1 68 75 75 90 130 145 160 210 270 350 390

kVAr 53 75*1 71 77 80 100 140 160 170 230 290 380 420

kVAr 60 75 85 90 95 120 170 190 210 280 350 450 500

kVAr 82 100 110 120 125 150 200 230 260 350 450 600 650

kVAr ––115125––––––––

120130160200–––––––––

A120130160200–––––––––

A12122025–––––––––

A1,41,422,5–––––––––

A 120 130 160 200 200 250 350 400 450 600 760 1000 1100

A 120 130 160 200 150 170 250 280 315 400 480 560 630

A 80 80 100 160 80 100 150 180 200 250 315 400 450

120130160200–––––––––

A606085100–––––––––

A1,81,822,5–––––––––

A0,250,250,50,5–––––––––

A120130160200–––––––––

A8080100110–––––––––

A5578–––––––––

16 Motor Contactor J7KN

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Main Contacts Type

J7KN(G)-10(D) J7KN(G)-14(D) J7KN(G)-18(D) J7KN(G)-22(D)

J7KN(G)-24 J7KN(G)-32 J7KN(G)-40 J7KN-50 J7KN-62 J7KN-74

Maximum ambient temperature

Operation open °C -40 to +60 (+90)*1

*1 With reduced control voltage range 0,9 up to 1,0 x Us and with reduced rated current Ie/AC1 according to Ie/AC3

enclosed °C -40 to +40

with thermal overlaod relay

open °C -25 to +60

enclosed °C -25 to +40

Storage °C -50 to +90

Short circuit protection

for contactors without thermal overload relay

Coordination-type

according to

IEC 60947-4-1

Contact welding without hazard of persons

max. fuse size

gL (gG) A 63 63 63 63 80 80 80 160 160 160

Coordination-type

according to

IEC 60947-4-1

Light contact welding accepted

max. fuse size

gL (gG) A 25 35 35 35 50 50 50 100 125 125

Contact welding not accepted

max. fuse size

gL (gG)A16161616253535506363

For contactors with thermal overload relay

the device with the smaller admissible

backup fuse (contactor or thermal overload

relay) determines the fuse size.

Cable cross-sections

for contactors without thermal overlad relay

1 cable per clamp

main connector

solid or stranded mm20,75-6 1,5-25 4-50

flexible mm21-4 2,5-16 10-35

flexible with multicore cable end mm20,75-4 1,5-16 6-35

2 cables per clamp solid or stranded mm26+(1-6) / 4+(0,75-4)

2,5+(0,75-2,5) / 1,5+(0,75-1,5)

16+(2,5-16) / 10+(4-16)

6+(4-16) / 4+(2,5-16)

50+4 / 35+6 / 25+(6-16)

16+(6-16) / 10+(6-16)

flexible mm26+(1,5-4) / 4+(1-4)

2,5+(0,75-2,5) / 1,5+(0,75-1,5)

16+(2,5-6) / 10+(4-10)

6+(4-16) / 4+(2,5-16)

50+(4-10) / 35+(4-16)

25+(4-25) / 16+(4-16)

1 cable per clamp

main connector

solid AWG 18-10 16-10 12-10

flexible AWG 18-10 14-4 10-0

2 cables per clamp

solid AWG 10+(16-10) / 12+(18-12)

14+(18-14) / 16+(18-16)

10+(16-10) / 12+(18-12)

14+(18-14) / 16+(18-16)

10+(12-10) / 12+12

flexible AWG 10+(14-10) / 12+(18-12)

14+(18-14) / 16+(18-16)

4+(18-12) / 6+(18-8)

8+(18-8) / 10+(18-12)

1+(12-10) / 2+(8-12)

3+(12-8) / 4+(10-6)

Frequency of operations z

Contactors without thermal overload relay

10000 7000 7000

without load

1/h

AC3, le1/h 600 600 400

AC4, le1/h 120 120 120

DC3, le1/h 600 600 400

Mechanical life

AC operated

S x 10610 10 10

DC operated

S x 10610 10 10

DC solenoid operated (KG3)

S x 10650 50 –

Short time current

10s-current

A 96 120 144 176 184 240 296 450 504 592

120s-current A 42 52 58 66 80 97 110 195 203 222

Power loss per pole

at I

/AC3 400V

W 0,21 0,35 0,5 0,75 0,7 1,3 2 2,2 3,9 5,5

contact resistance mW 2,1 1,8 1,5 1,5 1,2 1,2 1,2 1 1 1

Resistance to shock acc. to IED 68-2-27

Shock time 20ms sine-wave NO g 10 10 10 10 8 8 8 8 8 8

NCg6666––––––

Motor Contactor J7KN 17

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Type

J7KN-90 J7KN-115 J7KN-151 J7KN-176 J7KN-210 J7KN-260 J7KN-316 J7KN-450 J7KN-550 J7KN-700 J7KN-860

°C -10 to +60(+90)*1

*1 With reduced control voltage range 0,9 up to 1,0 x Us and with reduced rated current Ie/AC1 according to Ie/AC3

-25 to +55(+70)*2

*2 With reduced control voltage range 1,0 x Us and with reduced rated current Ie/AC1 according to Ie/AC3

°C -40 to +40 -25 to +40

°C -25 to +60 -25 to +55

°C -25 to +40 -25 to +40

°C -50 to +90 -55 to +80

A 250 250 250 315 400 450 500 630 630 800 1000

A 160 200 200 250 315 400 400 500 560 – –

A 100 125 160 200 250 315 – – – – –

mm2

mm2top below

0,5-95 + 10-120

mm2

0,5-70 + 10-95

AWG

AWG top below

20-10 –

AWG

20-2/0 8-2/0

1/h 3000 1200 1200 1200

1/h 300 – – –

1/h 120 – – –

1/h 300 – – –

S x 1065105 5

S x 106––– –

A 680 880 1200 1400 1800 2200 2600 3600 4400 5600 6900

A 275 330 500 575 800 900 1000 1400 1750 2200 2600

W 4,8 7,9 9 11 88 11 14,9 26,3 33,3 49 59,2

mW 0,6 0,5 0,4 0,35 0,18 0,16 0,15

g77–––––––––

g55–––––––––

busbar

18 x 4

screw

busbar

25 x 6

screw

M10

busbar

30 x 5

screw

M12

busbar

40 x 6

screw

M12

busbar

50 x 8

screw

M12

busbar

50 x 8

screw

M14

18 Motor Contactor J7KN

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Auxiliary Contacts Type J7KN-10D/14D/18D/22D J7KNG-10/14/18/22 J7KN(G)-24/32/40 J7KN-50/62/74

Rated insulation voltage Ui *1

*1 Suitable for: earthed-neutral systems, overvoltage category I to IV, pollution degree 3 (standard-industry): Uimp = 8kV.

Data for other conditions on request.

V~ 690 – –

Thermal rated current l

to 690V

Ambient temperature 40°C A 10 16 – –

60°C A 6 12 – –

Utilization category AC15

Rated operational current l

220-240V A 3 12 – –

380-415VA24––

440V A 1,6 4 – –

500V A 1,2 3 – –

660-690V A 0,6 1 – –

Utilization category DC13

Rated operational current l

60V A 3,5 8 – –

110V A 0,5 1 – –

220V A 0,1 0,1 – –

Short circuit protection

Short-circuit current 1kA,

contact welding not accepted

For contactors with thermal overload relay the device with the smaller admissible control fuse

(contactor or thermal overload relay) determines the fuse.

max. fuse size

gL (gG) A 25 – –

Control Circuit

Power consumption of coils

AC operated

inrush VA 33-45 90-115 140-165

sealed VA 7-10 9-13 13-18

W 2,6-3 2,7-4 5,4-7

DC operated inrush W 75 140 200

double winding coil sealed W 2 2 6

DC solenoid operated inrush W 3 4 –

(KG3) sealed W 3 4 –

Operation range of coils

in multiples of control voltage U

AC operated 0,85-1,1 0,85-1,1 0,85-1,1

DC operated 0,8-1,1 0,8-1,1 0,8-1,1

Switching time

at control voltage U

±10%

*2 Total breaking time = release time + arc duration

AC operated make time ms 8-16 10-25 12-28

release time ms 5-13 8-15 8-15

arc duration ms 10-15 10-15 10-15

DC operated make time ms 8-12 10-20 12-23

release time ms 8-13 10-15 10-18

arc duration ms 10-15 10-15 10-15

DC solenoid operated make time ms 65-85 65-85 –

(KG3) release time ms 20-30

20-30

–

arc duration ms 10-15 10-15 –

Cable cross-section

Auxiliary connector

solid mm

0,75-6 – –

flexible mm

1-4 – –

flexible with multicore cable end mm

0,75-4 – –

Magnet coil solid mm

0,75-2,5 0,75-2,5 0,75-2,5

flexible mm

0,5-2,5 0,5-2,5 0,5-2,5

flexible with multicore end mm

0,5-1,5 0,5-1,5 0,5-1,5

Clamps per pole 2 2 2

Auxiliary connector

solid AWG 18-10 – –

flexible AWG 18-10 – –

Magnet coil solid AWG 14-12 14-12 14-12

flexible AWG 18-12 18-12 18-12

Clamps per pole 2 2 2

Motor Contactor J7KN 19

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

*3 Values for delay of the release time of the make contact and the make time of the break contact will be increased, if magnet coils are

protected against voltage peaks (varistor, RC-unit, diode-unit)

*4 with built-in coil suppressor

Type

J7KN-90 J7KN-115 J7KN-151 J7KN-176 J7KN-210 J7KN-260 J7KN-316 J7KN-450 J7KN-550 J7KN-700 J7KN-860

V~ – – – 690 690

A– – – 10 10

A– – – – –

A– – – 3 3

A– – – 2 2

A– – – 1,5 1,5

A– – – 1 1

A– – – – –

A– – – 1 1

A– – – 0,5 0,5

A– – – 10 10

VA 190-280 350 360 800-950 1350-1600

VA 5 5 9-11 21-25

W2,5-5 – – – –

W 280 350 360 700-850 1300-1550

W 5 5 5 8-10 18-22

W– – – – –

0,85-1,1 0,85-1,1 0,85-1,1 0,85-1,1

0,8-1,1 0,85-1,1 0,85-1,1 0,85-1,1

ms 20-35 30-60 40-60 50-10

ms 35-50 30-80 15-45 150-200 / 500-1000

ms 10-15 – –

ms 20-35 30-60 40-60 –

ms 35-50 30-80 15-45 –

ms 10-15 – – –

ms – – – –

0,75-2,5 – – 0,75-2,5

0,5-1,5 – – –

0,75-2,5 1-2,5 1-2,5 1-2,5

0,5-2,5 1-2,5 1-2,5 1-2,5

0,5-1,5 – – –

222 2

AWG 14-12 – – 16-12

AWG 18-12 – – 16-12

AWG 14-12 16-12 16-12 16-12

AWG 18-12 16-12 16-12 16-12

222 2

20 Motor Contactor J7KN

Contactors for North America

Data according to UL508

Main Contacts (cULus) Type

J7KN(G)-10(D) J7KN(G)-14(D) J7KN(G)-18(D) J7KN(G)-22(D)

J7KN(G)-24 J7KN(G)-32 J7KN(G)-40 J7KN-50 J7KN-62

Rated operational current

General Use

A25253030506580110120

Motor DOL 3-pase

at 60Hz

Rated operational current

600V A10 14 18 22 22 27 34 44 52

Rated operational power 110-120V hp 1½223557½1010

200V hp 33557½10101520

220-240V hp 3 3 7½ 7½ 10 10 15 20 25

277V hp 3 5 7½ 7½ 7½ 10 15 20 25

380-415V hp 5 5 10 10 10 15 20 25 30

440-480V hp 5 7½10151520253040

550-600V hp 7½ 10 15 20 20 25 30 40 50

Motor DOL 1-pase

at 60Hz

Rated operational current

600V A10 14 18 22 22 27 34 44 52

Rated operational power

of AC motors

at 60Hz (1ph)

110-120V hp ½¾11½1½2335

200V hp 11,523357½7½10

220-240V hp 1½233557½1015

277V hp 233557½101015

380-415V hp 335557½101520

440-480V hp 3557½7½10152025

550-600V hp 3 5 7½ 10 10 15 20 25 30

Motor DOL 3-pase according ANSI A17.5

Rated operational current

600V A– –––15 22 – 27 37

Rated operational

power of 3-phase motors

for elevators

(500.000 operations)

110-120V hp ––––23–35

200V hp ––––35–7½10

220-240V hp ––––57½–7½10

440-480V hp ––––1015–2025

550-600V hp ––––1020–2530

Rated current 2 series contacts 600V A––––2227–4452

Fuse Class RK5/Short-circuit current A/kA 45/5 50/5 70/5 90/5 90/5 125/5 175/5 200/5 250/5

Fuse Class T/Short-circuit current A/kA 45/100 50/100 70/100 90/100 110/100 150/100 150/100 175/100 175/100

Rated voltage V600 600 600 600 600 600 600 600 600

Auxiliary Contacts (cULus)

A600A600A600A600–––––

Motor Contactor J7KN 21

Contactors for North America

Data according to UL508

Type

J7KN-74 J7KN-90 J7KN-115 J7KN-151 J7KN-176 J7KN-210 J7KN-260 J7KN-316 J7KN-450 J7KN-550 J7KN-700 J7KN-860

A 130 160 200 180 220 250 300 350 420 520 700 810

A66 85 99 125 150 300 400 550 700

hp 101530–––––––––

hp 25 25 35 40 50 60 75 100 125 150 200 250

hp 30 35 40 50 60 75 100 125 125 150 250 300

hp 30–––––––––––

hp 405060–––––––––

hp 50 65 75 100 125 150 200 250 250 350 500 600

hp 50 85 100 125 150 200 250 300 250 350 500 600

A66 86 103 125 150 –––––––

hp 7½8101525–––––––

hp 151520–––––––––

hp 1520252530405050––––

hp 152025–––––––––

hp 203040–––––––––

hp 254050–––––––––

hp 305060–––––––––

A––––––––––––

hp ––––––––––––

A66–––––––––––

A/kA 300/5 300/10 300/10 300/10 350/10 400/18 500/18 500/18 1200/18 1200/18 2000/30 2000/30

A/kA 175/100 300/100

*1 Class T and Class RK1

300/100

–––––––––

V600 600 600 600 600 600 600 600 600 600 600

––––––––A600A600A600A600

22 Motor Contactor J7KN

Contactors

Data according to IEC 60947-4-1, EN 60947-4-1, VDE 0660

Contact Life

For selection of the suitable contactor-type according to supply volt-

age, power rating and application (utilization category AC1, AC3 or

AC4) use contact life characteristic diagram.

For the most common supply voltages four scales of power ratings Pn

are provided for each utilization category.

Select contactor-type according to utilization category AC3 (breaking

current Ia = Ie) using the motor rating scales to the right, according

to utilization category AC4 (breaking current Ia = 6 x Ie) using the

motor rating scales to the left.*1

Select contactor-type according to utilization category AC1 (breaking

current Ia = Ie/AC1) using the breaking current scale.*1

For contactors frequently used under AC3/AC4-mixed service condi-

tions calculate contact life with the formula:

1. Pay attention to the approved rated values of the selected

contactor according to the national approvals

MAC3

1%AC4

100

-----------------x AC3

AC4

----------- 1–





---------------------------------------------------------=

M = Contact life (switching cycles) for AC3/AC4-mixed operations

AC3 = Contact life (switching cycles) for AC3 operations (normal switching

conditions). Breaking current Ia = rated motor current In.

AC4 = Contact life (switching cycles) for AC4 operations (inching).

Breaking current Ia= multiples of rated motor current In.

%AC4 = Percents of AC4-operations related to the total cycles.

Motor Rating

Pn/AC4

Motor Rating

Pn/AC3

Breaking Current

Ia (=Ie/AC1)

J7KN-74

J7KN-24

J7KN-32

J7KN-40

J7KN-50

J7KN-62

J7KN-22

J7KN-18

J7KN-14

J7KNA-12

J7KN-10

J7KNA-09

millions of operations

J7KN-860

J7KN-700

J7KN-550

J7KN-450

J7KN-316

J7KN-260

J7KN-210

J7KN-176

J7KN-151

J7KN-115

J7KN-90

Motor Rating

Pn/AC4

Motor Rating

Pn/AC3

Breaking Current

Ia (=Ie/AC1)

millions of operations

10000

8000

6000

4000

2000

1000

800

600

400

200

100

0,01 0,02 0,04 0,06 0,080,1 0,2 0,4 0,6 0,812 46810

Motor Contactor J7KN 23

Contactors

Utilization Categories

For easier choice of devices and in order to make the comparison of

different products simplier are utilization categories for contactors and

motor-starters according to IEC 947-4-1 and VDE 0660 Part 102, for

control circuit devices and switching elements according to IEC 947-5-

1 and VDE 0660 Part 200 determind. The table offers different utiliza-

tion categories, typical applications and assorted test conditions.

Ue Rated operational voltage, U Voltage before make, Ur Recovery voltage, Ie Rated operational current, I Current make, Ic Current broken

1) Test with incandescent lamps

2) Test conditions according to standard

Ty p e of

current

Cate-

gory

Typical applications Rated operational

current

Test conditions for the number of

on-load operating cycles

Test conditions for

making and breaking capacities

Make Break Make Break

I/Ie U/Ue cos Ic/Ie Ur/Ue cos I/Ie U/Ue cos Ic/Ie Ur/Ue cos

Alternating Current

AC1 Non-inductive or

slightly inductive loadsre-

sistance furnaces

all values 1 1 0.95 1 1 0.95 1.5 1.05 0.8 1.5 1.05 0.8

AC2 Slip-ring motors:

starting, switching off

all values 2.5 1 0.65 2.5 1 0.65 4 1.05 0.65 4 1.05 0.65

AC3 Squirrel-cage motors:

starting, switching off mo-

tors during running

17A< Ie 17A 6 1 0.65 1 0.17 0.65 10 1.05 0.45 8 1.05 0.45

Ie 100A 6 1 0.35 1 0.17 0.35 10 1.05 0.45 8 1.05 0.45

Ie> 100A 6 1 0.35 1 0.17 0.35 10 1.05 0.35 8 1.05 0.35

AC4 Squirrel-cage motors:

starting, plugging, inching

17A< Ie 17A 6 1 0.65 6 1 0.65 12 1.05 0.45 10 1.05 0.45

Ie 100A 6 1 0.35 6 1 0.35 12 1.05 0.45 10 1.05 0.45

Ie> 100A 6 1 0.35 6 1 0.35 12 1.05 0.35 10 1.05 0.35

AC5a Switching of electric dis-

charge lamp controls

all values ------31.050.4531.050.45

AC5b Switching of incandes-

cent lamps

all values ------1.51.05 1)41.05 1)

AC6a Switching of transformers Ie 100A - - - - - - 4.5 1.05 0.45 3.6 1.05 0.45

Ie> 100A - - - - - - 4.5 1.05 0.35 3.6 1.05 0.35

AC6b Switching of capacitor

banks

- ------2) 2)

AC7a Slightly inductive loads in

household appliances

and similar applications

all values ------1.51.050.81.51.050.8

AC7b Motor loadsfor household

applications

Ie 100A - - - - - - 8 1.05 0.45 6 1.05 0.45

Ie>100A------81.050.3561.050.35

AC8a Hermetic refrigerant com-

pressor motor control with

manualresetting of over-

load releases

Ie 100A - - - - - - 6 1.05 0.45 6 1.05 0.45

Ie>100A------61.050.3561.050.35

AC8b Hermetic refrigerant com-

pressor motor control with

automatic resetting of

overload releases

Ie 100A - - - - - - 6 1.05 0.45 6 1.05 0.45

Ie>100A------61.050.3561.050.35

AC12 Control of resistive loads

and solid state loads with

isolation by opto couplers

all values ------110.9110.9

AC13 Control of solid state

loads with transformer

isolation

all values ------101.10.651.11.10.65

AC14 Control of small electro-

magnetic loads (<=72VA)

- ------61.10.761.10.7

AC15 Control of

electromagnetic load

(>72VA)

- 10 1 0.7 1 1 0.4 10 1.1 0.3 10 1.1 0.3

Make L/R Break L/R Make L/R Break L/R

I/Ie U/Ue [ms] Ic/Ie Ur/Ue [ms] I/Ie U/Ue [ms] Ic/Ie Ur/Ue [ms]

Direct Current

DC1 Non-inductive or

slightly inductive loads re-

sistance furnaces

all values 1111111.51.0511.51.051

DC3 Shunt-motors: starting,

plugging, inching dynamic

braking of d.c. motors

all values 2.5122.51241.052.541.052.5

DC5 Series-motors:

starting, plugging, inching

dynamic braking of d.c.

motors

all values 2.5 1 7.5 2.5 1 7.5 4 1.05 15 4 1.05 15

DC6 Switching of incandes-

cent lamps

all values ------1.51.05 1)41.05 1)

DC12 Control of resistive loads

and solid state loads with

isolation by opto couplers

all values ------111111

DC13 Control of electromagnets all values 1 1 300 1 1 300 1.1 1.1 300 1.1 1.1 300

DC14 Control of electromagnet-

ic loads having economy

resistors in circuit

all values ------101.115101.115

24 Motor Contactor J7KN

Accessories

Data according to IEC 60947-4-1, EN 60947-5-1, VDE 0660

Data according to CSA, UL and CUL

Auxiliary Contacts Ty p e J73KN-B J73KN-B...A J73KN-C J73KN-D J74KN-B-TP...

Rated insulation voltage Ui

*1 Suitable for: earthed-neutral systems, overvoltage category I to IV, pollution degree 3

(standard-industry): Uimp = 8kV. Data for other conditions on request

V~ 690 690 690 690 690

Thermal rated current Ith to 690V

Ambient temperature 40°C A 10 25 10 10 10

60°C A 6 20 6 -

Frequency of operations z 1/h 3000 3000 3000 3000 1200

Mechanical life S x 10610 10 10 10 1

Power loss per pole at Ie/AC1 W 0,5 1,5 0,5 - -

Utilization category AC15

Rated operational current Ie 220-240V A 3 6 3 3 4

380-400V A 2 3 2 2 3

440V A 1,6 2 1,6 1,5 2

500V A 1,2 2 1,2 1,5 2

660-690V A 0,6 1 0,6 1 2

Utilization category DC13

Rated operational current Ie60VA282- 2,5

110V A 0,4 1 0,4 1 1,5

220V A 0,1 0,1 0,1 0,5 0,2

Short circuit protection

short-circuit current 1kA, contact

welding not accepted max. fuse

size

gL (gG)A2025201010

For contactors with thermal overload relay or auxiliary con-

tacts the device with the smaller admissible control fuse

(contactor or thermal overload relay) determines the fuse

size.

Cable cross-sections

solid or stranded mm²0,75-2,5 0,75-2,5 0,75-2,5 0,75-2,5 1-2,5

flexible mm²0,75-2,5 0,75-2,5 0,75-2,5 0,75-2,5 0,75-2,5

flexible with multicore cable end mm²0,5-1,5 0,5-1,5 0,5-1,5 - 0,75-2,5

Cables per clamp 22222

Auxiliary Contacts Ty p e J73KN-B J73KN-B...A J73KN-C J73KN-D J74KN-B-TP...

Rated operational current

„General Use“

A1016101010

Rated operational voltage max. V AC 600 600 600 600 600

Auxiliary Contacts A600 A600 A600 A600 A600

Motor Contactor J7KN 25

■Dimensions / Position of Terminals

Contactors

J7KN-10D/14D/18D/22D(-4)... J7KN-10D-10 to

J7KN-22D-10

J7KN-10D-01 to

J7KN-22D-01

J7KN-10D-4_ to

J7KN-22D-4_

J7KNG-10/14/18/22(-4)...D J7KNG-10-10...D

J7KNG-14-10...D

J7KNG-18-10...D

J7KNG-22-10...D

J7KNG-10-01...D

J7KNG-14-01...D

J7KNG-18-01...D

J7KNG-22-01...D

J7KNG-10-4_...D

J7KNG-14-4_...D

J7KNG-18-4_...D

J7KNG-22-4_...D

J7KN-10D/14D/18D/22D...D J7KN-10D-10...D

J7KN-14D-10...D

J7KN-18D-10...D

J7KN-22D-10...D

J7KN-10D-01...D

J7KN-14D-01...D

J7KN-18D-01...D

J7KN-22D-01...D

J7KN-10D-4_...D

J7KN-14D-4_...D

J7KN-18D-4_...D

J7KN-22D-4_...D

J7KN-24/32/40... J7KN-24

J7KN-32

J7KN-40

J7KNG-24/32/40...D J7KNG-24...D

J7KNG-32...D

J7KNG-40...D

111

107

6.5

M3.5

Ø4.5

104.5

100.5

6.5

1010

Ø4,5

87.5

125

121

6.5

›4.5

45 1010

108

1 L1 3 L2 5 L3

A2A1

4 T22 T1 6 T3

A1 A2

26 Motor Contactor J7KN

J7KN-24/32/40...D J7KN-24...D

J7KN-32...D

J7KN-40...D

J7KN-50/62/74 J7KN-50

J7KN-62

J7KN-74

J7KN-50/62/74...D J7KN-50...D

J7KN-62...D

J7KN-74...D

J7KN-90...

J7KN-115...

J7KN-90

J7KN-115

J7KN-90...D

J7KN-115...D

J7KN-151...

J7KN-176...

J7KN-151

J7KN-176

J7KN-151

J7KN-176

100

113

109

110

7.5

10 10

Ø5.5

137

(›6)

155

31.531.5

136

115

›6

1010

12 x 70

Motor Contactor J7KN 27

J7KN-210...

J7KN-260...

J7KN-316...

J7KN-210...

J7KN-260...

J7KN-316...

J7KN-450...

J7KN-550...

J7KN-450...

J7KN-550...

J7KN-700...

J7KN-860...

J7KN-700...

J7KN-860...

28 Motor Contactor J7KN

Auxiliary contacts blocks

Pneumatic Timer

Mechanical Interlocks

Suppressor Units

J74KN-B J74KN-C J74KN-D_F J74KN-D_S J74KN-F

J74KN-B-TP...

J74KN-B-ML J74KN-C-ML J74KN-D2-ML J74KN-E-ML

J74KN-C2-RC

Motor Contactor J7KN 29

Additional Terminals

Terminals Cover Marking Systems

Wiring Systems

J74KN-LG-9030 J74KN-LG-11224

J74KN-LG-10404 J74KN-LG-11457 J74KN-P

Drawing J74-WKR-B2 Drawing J74-WKR-C

Drawing J74-WKSD-B2 Drawing J74-WKSD-C

30 Motor Contactor J7KN

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

Cat. No. J06E-EN-03A

Do not use/install these products before having read the applicable precautions as listed in Cat. No. J09-EN-01

available from www.europe.omron.com or on request from OMRON local sales office.