F160-VP 5M - OMRON - Datasheet.Directory

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Metal Film (Thin Film) Chip Resistors, High Reliability Type

Inch

0201

0402

0603

0805

1206

Metal Film

Chip Resistors

Product Code Size, Power Rating

Code Power Rating

0.05 W

0.063 W

0.1 W

0.125 W

0.25 W

Temperature Coefﬁcient

Code

±10×10–6/°C

±15×10–6/°C

±25×10–6/°C

±50×10–6/°C

±100×10–6/°C

Resistance Tolerance

Code

Tolerance

±0.05 %

±0.1 %

±0.25 %

±0.5 %

Resistance Value

Consist of three ﬁgures for E24 series resistance value.

The ﬁrst two digits are signiﬁcant ﬁgures of resistance

and the third one denotes number of zeros following.

(example) 102 : 1k Ω

Packaging Methods

Code

Packaging Part No.

T.C.R.

Punched Carrier Taping

2 mm pitch, 10000 pcs.

Punched CarrierTaping

4 mm pitch, 5000 pcs.

ERA2A

Pressed Carrier Taping

2 mm pitch, 15000 pcs. ERA1A

ERA3A

ERA6A

ERA8A

Metal Film

Chip Resistors

Product Code Size, Power Rating

Code Power Rating

0.05 W

0.063 W

0.1 W

0.125 W

0.25 W

Temperature Coefﬁcient

Code

±10×10–6/°C

±15×10–6/°C

±25×10–6/°C

±50×10–6/°C

±100×10–6/°C

Resistance Tolerance

Code

Tolerance

±0.05 %

±0.1 %

±0.25 %

±0.5 %

Resistance Value

Consist of four ﬁgures for E96 series resistance value.

The ﬁrst three digits are signiﬁcant ﬁgures of resistance

and the fourth one denotes number of zeros following.

(example) 1051 : 1.05k Ω

T.C.R.

Packaging Methods

Code

Packaging Part No.

Punched Carrier Taping

2 mm pitch, 10000 pcs.

Punched CarrierTaping

4 mm pitch, 5000 pcs.

ERA2A

Pressed Carrier Taping

2 mm pitch, 15000 pcs. ERA1A

ERA3A

ERA6A

ERA8A

Inch

0201

0402

0603

0805

1206

Metal Film (Thin Film) Chip Resistors,

High Reliability Type

Type: ERA 1A, 2A, 3A, 6A, 8A

Explanation of Part Numbers

Features

● High reliability ................ Stable at high temperature and humidity

(85 °C 85 %RH rated load, Category temperature range : –55 °C to +155 °C)

● High accuracy ............... Small resistance tolerance and Temperature Coefﬁ cient of Resistance

● High performance ......... Low current noise, excellent linearity

● Reference Standard ...... IEC 60115-8, JIS C 5201-8, EIAJ RC-2133B

● AEC-Q200 qualiﬁ ed

● RoHS compliant

■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,

Please see Data Files

● E24 Series

● E96 Series and other Resistance values

note : Duplicated resistance values as E24 series part

numbers shall follow E24 part numbers.

(apply three digit resistance value)

Sep. 201812

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Metal Film (Thin Film) Chip Resistors, High Reliability Type

Construction Dimensions in mm (not to scale)

Ratings

(1)

Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=√Rated Power × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.

(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be de termined from SOTV=2.5 × RCWV or max. Over load Volt age list ed above which ev er less.

(3) E192 series resistance values are also available. Please contact us for details.

(4) Duplicated resistance values between E96, E192 and E24 series shall follow E24 Part Numbers. (apply three digit resistance value)

Part No.

(inch size)

Power Rating

at 85 °C

(W)

Limiting Element

Voltage(1)

(V)

Maximum

Overload Voltage

(

(V)

Part No.

(detail)

Resistance

Tolerance

(%)

T.C.R.

(×10–6/°C)

Resistance

Range

(3)(4)

(Ω)

Category

Temperature Range

(°C)

ERA1A

(0201) 0.05 25 50

ERA1AEB ±0.1 ±25

100 to 10k (E24, E96)

–55 to +155

ERA1AEC ±0.25

ERA1ARC ±0.25

±10

100 to 10k (E24, E96)

ERA1ARB ±0.1

ERA1ARW ±0.05

1k to 10k (E24, E96)

ERA2A

(0402) 0.063 50 100

ERA2AKD ±0.5 ±100

10 to 46.4 (E24, E96)

ERA2AED ±0.5

±25

47 to 100k (E24, E96)

ERA2AEC ±0.25

ERA2AEB ±0.1

ERA2APC ±0.25 ±15

200 to 47k (E24, E96)

ERA2APB ±0.1

ERA2ARC ±0.25 ±10

200 to 47k (E24, E96)

ERA2ARB ±0.1

ERA3A

(0603) 0.1 75 150

ERA3AHD ±0.5 ±50

10 to 46.4 (E24, E96)

ERA3AED ±0.5

±25

47 to 330k (E24, E96)

ERA3AEC ±0.25

ERA3AEB ±0.1

ERA3APC ±0.25 ±15

470 to 100k (E24, E96)

ERA3APB ±0.1

ERA3ARC ±0.25

±10

1k to 100k (E24, E96)

ERA3ARB ±0.1

ERA3ARW ±0.05

ERA6A

(0805) 0.125 100 200

ERA6AHD ±0.5 ±50

10 to 46.4 (E24, E96)

ERA6AED ±0.5

±25

47 to 1M (E24, E96)

ERA6AEC ±0.25

ERA6AEB ±0.1

ERA6APC ±0.25 ±15

470 to 100k (E24, E96)

ERA6APB ±0.1

ERA6ARC ±0.25

±10

1k to 100k (E24, E96)

ERA6ARB ±0.1

ERA6ARW ±0.05

ERA8A

(1206) 0.25 150 300

ERA8AHD ±0.5 ±50

10 to 46.4 (E24, E96)

ERA8AED ±0.5

±25

47 to 1M (E24, E96)

ERA8AEC ±0.25

ERA8AEB ±0.1

ERA8APC ±0.25 ±15

470 to 100k (E24, E96)

ERA8APB ±0.1

ERA8ARC ±0.25

±10

1k to 100k (E24, E96)

ERA8ARB ±0.1

ERA8ARW ±0.05

Protective coating

Alumina substrate

Electrode (Inner)

Electrode

(Between)

High reliability

metal ﬁlm Electrode (Outer)

Part No.

(inch size)

Dimensions (mm)

Mass (Weight)

[g/1000 pcs.]

LWa b t

ERA1A (0201) 0.60±0.03 0.30±0.03 0.15±0.05 0.15±0.05 0.23±0.03 0.14

ERA2A (0402) 1.00±0.10 0.50+0.10 0.15±0.10 0.25±0.10 0.35±0.05 0.6

ERA3A (0603) 1.60±0.20 0.80±0.20 0.30±0.20 0.30±0.20 0.45±0.10 2

ERA6A (0805) 2.00±0.20 1.25±0.10 0.40±0.25 0.40±0.25 0.50±0.10 4

ERA8A (1206) 3.20±0.20 1.60+0.05 0.50±0.25 0.50±0.25 0.60±0.10 8

–0.05

–0.15

Sep. 201812

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Metal Film (Thin Film) Chip Resistors, High Reliability Type

–40 –20 0 20 40 60 80 100 120 140 160

0180–60

85 °C

–55 °C

100

Rated Load (%)

Ambient Temperature (°C)

155 °C

Power Derating Curve

For resistors operated in ambient temperatures above

85 °C, power rating shall be derated in accordance

with the figure on the right.

Sep. 201812

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Surface Mount Resistors Safety precautions

Safety Precautions (Common precautions for Surface Mount Resistors)

The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors

in this catalog.

1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the

resistors) so as not to damage their electrodes and protective coatings.

Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur.

2. Keep the rated power and ambient temperature within the specified derating curve.

Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or am bi ent

tem per a tures can become factors in the rise of the temperature of the re sis tors, regardless of the level of power

applied. Therefore, check the conditions before use and op ti mize them so as not to damage the boards and peripheral

components.

Make sure to contact us before using the resistors under special conditions.

3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the

operations of the resistors when installed in your products before use.

Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired.

4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the

per for mance and reliability of the resistors.

5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a

soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.).

6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing

problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder.

7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be

impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during

handling of the boards with the resistors mounted.

8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors'

protective coatings and bodies may be chipped, affecting their performance.

9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress.

10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of im mer sion.

11. Transient voltage

If there is a possibility that the transient phe nom e non (significantly high voltage ap plied in a short time) may

oc cur or that a high voltage pulse may be applied, make sure to evaluate and check the char ac ter is tics of

Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated

pow er limit or steady-state conditions to complete the de sign or decide to use the resistors.

12. Do not apply excessive tension to the terminals.

Sep. 201402

Safety Precautions (Common precautions for Fixed Resistors)

• When using our products, no matter what sort of equipment they might be used for, be sure to make a written

agreement on the specifications with us in advance. The design and specifications in this catalog are subject

to change without prior notice.

• Do not use the products beyond the specifications described in this catalog.

• This catalog explains the quality and performance of the products as individual components. Before use, check

and evaluate their operations when installed in your products.

• Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment

where a defect in these products may cause the loss of human life or other significant dam age, such as damage to

vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating

appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.

✽ Systems equipped with a protection circuit and a protection device

✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a sin gle fault

(1) Precautions for use

• These products are designed and manufactured for general and standard use in general elec tron ic equipment

(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)

• These products are not intended for use in the following special conditions. Before using the products,

carefully check the effects on their quality and performance, and determine whether or not they can be used.

1. In liquid, such as water, oil, chemicals, or organic solvent

2. In direct sunlight, outdoors, or in dust

3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2

4. Electric Static Discharge (ESD) Environment

These components are sensitive to static electricity and can be damaged under static shock (ESD).

Please take measures to avoid any of these environments.

Smaller components are more sensitive to ESD environment.

5. Electromagnetic Environment

Avoid any environment where strong electromagnetic waves exist.

6. In an environment where these products cause dew condensation

7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with

resin or other materials

• These products generate Joule heat when energized. Carefully position these products so that their heat will

not affect the other components.

• Carefully position these products so that their temperatures will not exceed the category temperature range due

to the effects of neighboring heat-generating components. Do not mount or place heat-generating components

or inflammables, such as vinyl-coated wires, near these products.

• Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the

performance or reliability of the products.

• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance

or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water

residues. Otherwise, the insulation performance may be deteriorated.

(2) Precautions for storage

The performance of these products, including the solderability, is guaranteed for a year from the date of ar riv al

at your company, provided that they remain packed as they were when delivered and stored at a tem per a ture

of 5 °C to 35 °C and a relative humidity of 45 % to 85 %.

Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,

their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping

materials) may be deformed or deteriorated, resulting in mounting failures.

1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2

2. In direct sunlight

Package markings include the product number, quantity, and country of origin.

In principle, the country of origin should be indicated in English.

Sep. 201401