Product Specification – May 26, 2015 V.12
DATA SHEET
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
General Purpose & High Capacitance
Class 2, X7R
6.3 V TO 50 V
100 pF to 22 µF
RoHS compliant & Halogen Free
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
2
19
Product specification
X7R
SCOPE
This specification describes X7R
series chip capacitors with lead-
free terminations.
APPLICATIONS
PCs, Hard disk, Game PCs
DVDs, Video cameras
Mobile phones
Data processing
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen Free compliant
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC &
12NC
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
Y
YA
AG
GE
EO
O
B
BR
RA
AN
ND
D
o
or
rd
de
er
ri
in
ng
g
c
co
od
de
e
GLOBAL PART NUMBER (PREFERRED)
CC
XXXX X X
X7R
X
BB
XXX
(1) (2) (3) (4) (5)
(1) SIZE – INCH BASED (METRIC)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
1812 (4532)
(2) TOLERANCE
J = ±5% (1)
K = ±10%
M = ±20%
(3) PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
C = Bulk case
(4) RATED VOLTAGE
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
(5) CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF
NOTE
1. Tolerance ±5% is not available for full product range, please contact local sales force
before ordering
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
3
19
Product specification
X7R
TYPE
L1 (mm)
W (mm)
T (MM)
L2 / L3 (mm)
L4 (mm)
min.
max.
min.
0201
0.6 ±0.03
0.3 ±0.03
Refer to
table 2 to 4
0.10
0.20
0.20
0402
1.0 ±0.05
0.5 ±0.05
0.15
0.30
0.40
0603
1.6 ±0.10 (1)
0.8 ±0.10 (1)
0.20
0.60
0.40
1.6 ±0.15 (2)
0.8 ±0.15 (2)
0805
2.0 ±0.10 (1)
1.25 ±0.10 (1)
0.25
0.75
0.55
2.0 ±0.20 (2)
1.25 ±0.20 (2)
1206
3.2 ±0.15 (1)
1.6 ±0.15 (1)
0.25
0.75
1.40
3.2 ±0.30 (2)
1.6 ±0.20 (2)
1210
3.2 ±0.20 (1)
2.5 ±0.20 (1)
0.25
0.75
1.40
3.2 ±0.40 (2)
2.5 ±0.30 (2)
1812
4.5 ±0.20 (1)
3.2 ±0.20 (1)
0.25
0.75
2.20
4.5 ±0.40 (2)
3.2 ±0.40 (2)
NOTE
1. Dimension for size 0603, C < 2.2 µF; 0805 to 1812, C ≤ 100nF
2. Dimension for size 0603, C = 1µF; 50V; 0805 to 1812, C > 100 nF
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
MLB457
terminations
electrodes
ceramic material
Fig. 1 Surface mounted multilayer ceramic capacitor construction
Table 1 For outlines see fig. 2
DIMENSION
O
OU
UT
TL
LI
IN
NE
ES
S
For dimension see Table 1
Fig. 2 Surface mounted multilayer
ceramic capacitor dimension
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
4
19
Product specification
X7R
Table 2 Sizes from 0201 to 0402
CAPACITANCE RANGE & THICKNESS FOR X7R
CAP.
0201
0402
6.3 V
10 V
16 V
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
100 pF
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
0.5±0.05
150 nF
220 nF
0.5±0.05
0.5±0.05
0.5±0.05
330 nF
470 nF
0.5±0.05
0.5±0.05
680 nF
1.0 µF
0.5±0.05
2.2 µF
4.7 µF
10 µF
22 µF
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
5
19
Product specification
X7R
Table 3 Sizes from 0603 to 0805
CAPACITANCE RANGE & THICKNESS FOR X7R
CAP.
0603
0805
6.3 V
10 V
16 V
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
100 pF
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
150 pF
220 pF
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
0.6±0.1
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
47 nF
68 nF
100 nF
150 nF
220 nF
1.25±0.2
330 nF
1.25±0.2
1.25±0.2
1.25±0.2
1.25±0.2
470 nF
680 nF
1.0 µF
0.8±0.15
2.2 µF
4.7 µF
10 µF
22 µF
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
6
19
Product specification
X7R
Table 4 Size 1206
CAPACITANCE RANGE & THICKNESS FOR X7R
CAP.
1206
6.3 V
10 V
16 V
25 V
50 V
100 pF
0.85±0.1
0.85±0.1
0.85±0.1
150 pF
220 pF
0.85±0.1
0.85±0.1
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
0.85±0.1 / 1.15±0.1
220 nF
330 nF
0.85±0.1 / 1.15±0.1
0.85±0.1
470 nF
0.85±0.1
1.0±0.1
680 nF
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.0 µF
1.6±0.2
2.2 µF
4.7 µF
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
10 µF
22 µF
47 µF
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
4. Please contact local sales force for special ordering code before ordering
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
7
19
Product specification
X7R
Table 5 Sizes from 1210 to 1812
CAPACITANCE RANGE & THICKNESS FOR X7R
CAP.
1210
1812
6.3 V
10 V
16 V
25 V
50 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
3.3 nF
4.7 nF
0.85±0.1
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
1.15±0.1
150 nF
1.15±0.1
220 nF
330 nF
470 nF
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.25±0.2
680 nF
1.6±0.2
1.0 µF
1.25±0.2
1.25±0.2
1.25±0.2
1.25±0.2
2.2 µF
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
4.7 µF
2.5±0.3
10 µF
22 µF
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
47 µF
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For product with 5% tolerance, please contact local sales force before ordering
4. Please contact local sales force for special ordering code before ordering
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
8
19
Product specification
X7R
Table 6
THICKNESS CLASSES AND PACKING QUANTITY
SIZE
CODE
THICKNESS
CLASSIFICATION
TAPE WIDTH
QUANTITY PER REEL
Ø 180 MM / 7 INCH
Ø 330 MM / 13 INCH
QUANTITY
PER BULK CASE
Paper
Blister
Paper
Blister
0201
0.3 ±0.03 mm
8 mm
15,000
---
50,000
---
---
0402
0.5 ±0.05 mm
8 mm
10,000
---
50,000
---
50,000
0603
0.8 ±0.1 mm
8 mm
4,000
---
15,000
---
15,000
0.6 ±0.1 mm
8 mm
4,000
---
20,000
---
10,000
0805
0.85 ±0.1 mm
8 mm
4,000
---
15,000
---
8,000
1.25 ±0.2 mm
8 mm
---
3,000
---
10,000
5,000
1206
0.6 ±0.1 mm
8 mm
4,000
---
20,000
---
---
0.85 ±0.1 mm
8 mm
4,000
---
15,000
---
---
1.00 / 1.15 ±0.1 mm
8 mm
---
3,000
---
10,000
---
1.25 ±0.2 mm
8 mm
---
3,000
---
10,000
---
1.6 ±0.15 mm
8 mm
---
2,500
---
10,000
---
1.6 ±0.2 mm
8 mm
---
2,000
---
8,000
---
1210
0.6 / 0.7 ±0.1 mm
8 mm
---
4,000
---
15,000
---
0.85 ±0.1 mm
8 mm
---
4,000
---
10,000
---
1.15 ±0.1 mm
8 mm
---
3,000
---
10,000
---
1.15 ±0.15 mm
8 mm
---
3,000
---
10,000
---
1.25 ±0.2 mm
8 mm
---
3,000
---
---
---
1.5 ±0.1 mm
8 mm
---
2,000
---
---
---
1.6 / 1.9 ±0.2 mm
8 mm
---
2,000
---
---
---
2.0 ±0.2 mm
8 mm
---
2,000
1,000
---
---
---
2.5 ±0.2 mm
8 mm
---
1,000
500
---
---
---
1808
1.15 ±0.15 mm
12 mm
---
3,000
---
---
---
1.25 ±0.2 mm
12 mm
---
3,000
---
---
---
1.35 ±0.15 mm
12 mm
---
2,000
---
---
---
1.5 ±0.1 mm
12 mm
---
2,000
---
---
---
1.6 ±0.2 mm
12 mm
---
2,000
---
8,000
---
2.0 ±0.2 mm
12 mm
---
2,000
---
---
---
1812
0.6 / 0.85 ±0.1 mm
12 mm
---
2,000
---
---
---
1.15 ±0.1 mm
12 mm
---
1,000
---
---
---
1.25 ±0.2 mm
12 mm
---
1,000
---
---
---
1.5 ±0.1 mm
12 mm
---
1,000
---
---
---
1.6 ±0.2 mm
12 mm
---
1,000
---
---
---
2.0 ±0.2 mm
12 mm
---
1,000
---
---
---
2.5 ±0.2 mm
12 mm
---
500
---
---
---
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
9
19
Product specification
X7R
DESCRIPTION
VALUE
Capacitance range
100 pF to 47 µF
Capacitance tolerance
±5%, ±10%, ±20%
Dissipation factor (D.F.)
≤ 10 V
47pF ≤ 0201 ≤ 10nF
100pF ≤ 0402 ≤ 100nF
100pF ≤ 0603 ≤ 1µF
≤ 5%
150pF ≤ 0805 ≤ 2.2µF
220 pF ≤ 1206 ≤ 2.2µF
2.2nF ≤ 1210 ≤ 2.2µF
Exception:
220nF≤ 0402 ≤470nF
0603 = 2.2µF
0805 ≥ 4.7 µF
≤ 10%
1206 ≥ 4.7µF
4.7µF≤ 1210 ≤47µF
0201 ≥12 nF
0402 = 1µF
≤ 12.5%
16 V
47 pF≤ 0201 ≤1.2nF
100 pF≤ 0402 ≤22nF
100 pF≤ 0603 <470nF
≤ 3.5%
150 pF≤ 0805 ≤560nF
220pF≤ 1206 ≤1µF
2.2nF≤ 1210 ≤1µF
Exception:
1.5 nF≤ 0201 ≤10nF
27nF ≤ 0402 ≤100nF
680 nF≤ 0805 ≤2.2µF
≤ 5%
1206 = 2.2 µF
2.2µF ≤ 1210 ≤10 µF
470 nF≤ 0603 ≤1uF
0402 = 220 nF
4.7 µF≤ 0805 ≤10µF
4.7µF ≤ 1206 ≤ 10µF
≤ 10%
1210 = 22µF
25 V
47pF ≤ 0201 ≤ 470pF
100pF ≤ 0402 ≤ 10nF
100pF ≤ 0603 ≤39nF
≤ 2.5%
150pF ≤ 0805 ≤ 180nF
220pF ≤ 1206 ≤ 680nF
2.2nF≤ 1210 ≤1µF
Exception:
12 nF ≤ 0402 ≤ 47nF
47nF ≤ 0603 ≤220nF
220nF≤ 0805 ≤560 nF
≤ 3.5%
1206 = 1µF
560pF ≤ 0201 ≤10nF
56 nF≤ 0402 ≤100 nF
680nF ≤ 0805 ≤1µF
≤ 5%
1206 = 2.2µF
1210=2.2µF
270nF ≤ 0603 ≤1uF
2.2uF ≤ 0805 ≤ 4.7uF
1206 ≥ 4.7uF
≤ 10%
1210 ≥ 4.7 uF
≥ 50 V
≤ 2.5%
Exception:
020 1 ≥47pF
1µF ≥1206 ≥680nF
≤ 3.5%
0603 ≥47nF
47nF≥ 0402 ≥12 nF
470nF≥ 0805 ≥330 nF
≤ 3.0%
0805=680 nF
≤ 5%
0402=100nF
0603 ≥1µF
0805 ≥ 1µF
≤ 10%
1206 ≥ 2.2µF
1210 ≥ 2.2µF
Insulation resistance after 1 minute at Ur (DC)
Rins ≥ 10 GΩ or Rins × Cr ≥ 500(100) seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
±15%
Operating temperature range:
–55 °C to +125 °C
NOTE
Capacitance tolerance ±5% is not available for full product range, please contact local sales force before ordering
Table 7
ELECTRICAL CHARACTERISTICS
X
X7
7R
R
D
DI
IE
EL
LE
EC
CT
TR
RI
IC
C
C
CA
AP
PA
AC
CI
IT
TO
OR
RS
S;
;
N
NI
IS
SN
N
T
TE
ER
RM
MI
IN
NA
AT
TI
IO
ON
NS
S
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
10
19
Product specification
X7R
Fig. 3 Typical capacitance change as a function of
temperature
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
11
19
Product specification
X7R
Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0201 10 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0402 100 nF / 16 V
Solid lines: Impedance / Dotted lines: ESR
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
12
19
Product specification
X7R
Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0603 1 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 0805 1 µF / 16 V
Solid lines: Impedance / Dotted lines: ESR
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
13
19
Product specification
X7R
Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 1206 1 µF / 25 V
Solid lines: Impedance / Dotted lines: ESR
Fig. 9 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
Size 1206 10 µF / 10 V
Solid lines: Impedance / Dotted lines: ESR
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
14
19
Product specification
X7R
SOLDERING RECOMMENDATION
Table 8
SOLDERING
METHOD
SIZE
0402
0603
0805
1206
≥ 1210
Reflow
≥ 0.1 µF
≥ 1.0 µF
≥ 2.2 µF
≥ 4.7 µF
Reflow only
Reflow/Wave
< 0.1 µF
< 1.0 µF
< 2.2 µF
< 4.7 µF
---
TESTS AND REQUIREMENTS
Table 9 Test procedures and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Mounting
IEC 60384-
21/22
4.3
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Visual Inspection
and Dimension
Check
4.4
Any applicable method using × 10 magnification
In accordance with
specification
Capacitance (1)
4.5.1
Class 2:
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20
°C
Within specified tolerance
Dissipation
Factor (D.F.) (1)
4.5.2
Class 2:
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20
°C
In accordance with
specification
Insulation
Resistance
4.5.3
At Ur (DC) for 1 minute
In accordance with
specification
NOTE:
1. For individual product specification, please contact local sales.
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
15
19
Product specification
X7R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Temperature
Characteristic
IEC 60384-
21/22
4.6
Capacitance shall be measured by the steps shown in
the following table.
The capacitance change should be measured after 5 min
at each specified temperature stage.
Step
Temperature(℃)
a
25±2
b
Lower temperature±3℃
c
25±2
d
Upper Temperature±2℃
e
25±2
(1) Class I
Temperature Coefficient shall be calculated from the
formula as below
Temp, Coefficient =
6
10
T xC1 C1-C2
Δ
[ppm/℃]
C1: Capacitance at step c
C2: Capacitance at 125℃
∆T: 100℃(=125℃-25℃)
(2) Class II
Capacitance Change shall be calculated from the
formula as below
∆C =
C1
C1-C2
x 100%
C1: Capacitance at step c
C2: Capacitance at step b or d
<General purpose series>
Class1:
∆ C/C: ±30ppm
Class2:
X7R: ∆ C/C: ±15%
Y5V: ∆ C/C: 22~-82%
<High Capacitance series>
Class2:
X7R/X5R: ∆ C/C: ±15%
Y5V: ∆ C/C: 22~-82%
Adhesion
4.7
A force applied for 10 seconds to the line joining the
terminations and in a plane parallel to the substrate
Force
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
Bond Strength
4.8
Mounting in accordance with IEC 60384-22 paragraph
4.3
No visible damage
Conditions: bending 1 mm at a rate of 1 mm/s, radius jig
340 mm
<General Purpose series>
∆C/C
Class2:
X7R: ±10%
<High Capacitance series>
∆C/C
Class2:
X7R: ±10%
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
16
19
Product specification
X7R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Resistance to
Soldering Heat
4.9
Precondition: 150 +0/–10 °C for 1 hour, then keep
for 24 ±1 hours at room temperature
Preheating: for size ≤ 1206: 120 °C to 150 °C for
1 minute
Preheating: for size >1206: 100 °C to 120 °C for 1
minute and 170 °C to 200 °C for 1 minute
Solder bath temperature: 260 ±5 °C
Dipping time: 10 ±0.5 seconds
Recovery time: 24 ±2 hours
Dissolution of the end face plating shall
not exceed 25% of the length of the edge
concerned
<General Purpose series>
∆C/C
Class2:
X7R: ±10%
<High Capacitance series>
∆C/C
Class2:
X7R: ±10%
D.F. within initial specified value
Rins within initial specified value
Solderability
IEC 60384-
21/22
4.10
Preheated to a temperature of 80 °C to 140 °C
and maintained for 30 seconds to 60 seconds.
Test conditions for lead containing solder alloy
Temperature: 235 ±5 °C
Dipping time: 2 ±0.2 seconds
Depth of immersion: 10 mm
Alloy Composition: 60/40 Sn/Pb
Number of immersions: 1
Test conditions for lead-free containing solder
alloy
Temperature: 245 ±5 °C
Dipping time: 3 ±0.3 seconds
Depth of immersion: 10 mm
Alloy Composition: SAC305
Number of immersions: 1
The solder should cover over 95% of the
critical area of each termination
Rapid Change of
Temperature
4.11
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for
24 ±1 hours at room temperature
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Recovery time 24 ±2 hours
No visual damage
<General Purpose series>
∆C/C
Class2:
X7R: ±15%
<High Capacitance series>
∆C/C
Class2:
X7R: ±15%
D.F. meet initial specified value
Rins meet initial specified value
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
17
19
Product specification
X7R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Damp Heat
with Ur Load
IEC 60384-
21/22
4.13
1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer to initial spec C, D, IR
3. Damp heat test:
500 ±12 hours at 40 ±2 °C;
90 to 95% R.H. 1.0 Ur applied
4. Recovery:
Class 2: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the
minimum value permitted, then after the other
measurements have been made the capacitor
shall be preconditioned according to “IEC
60384 4.1” and then the requirement shall be
met.
No visual damage after recovery
<General Purpose series>
∆C/C
Class2:
X7R: ±15%
D.F.
Class2:
X7R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
Rins
Class2:
X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
<High Capacitance series(≥ 1uF) and
CC0402xRX7R9BB104>
∆C/C
Class2:
X7R: ±20%
D.F.
Class2:
X7R: 2 x initial value max
Rins
Class2:
X7R: 500 MΩ or Rins x Cr ≥ 25(5)s
whichever is less
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
18
19
Product specification
X7R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Endurance
IEC 60384-
21/22
4.14
1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer to initial spec C, D, IR
3. Endurance test:
Temperature: X7R: 125 °C
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x Ur for general products
Applied 1.5(1.0) x Ur for high cap. products
4. Recovery time: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be
preconditioned according to “IEC 60384 4.1” and
then the requirement shall be met.
No visual damage
<General Purpose series>
∆C/C
Class2:
X7R: ±15%
D.F.
Class2:
X7R: ≤ 16V: ≤ 7%
≥ 25V: ≤ 5%
Rins
Class2:
X7R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
<High Capacitance series(≥ 1uF) and
CC0402xRX7R9BB104>
∆C/C
Class 2:
X7R: ±20%
D.F.
Class 2:
X7R: 2 x initial value max
Rins
Class 2:
X7R: 1,000 MΩ or Rins x Cr ≥ 50(10)s
whichever is less
Voltage Proof
IEC 60384-
1
4.6
Specified stress voltage applied for 1~5 seconds
Ur ≦100 V: series applied 2.5 Ur
Charge/Discharge current is less than 50 mA
No breakdown or flashover
May. 26, 2015 V.12
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
19
19
Product specification
X7R
REVISION HISTORY
REVISION
DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 12
May 26, 2015
-
- 1210, 25V dissipation factor updated
Version 11
Jan. 06, 2015
-
- 0402, 100nF, 50V Dissipation factor (D.F.) updated.
Version 10
Jul. 08, 2014
-
- Dimension updated
Version 9
Aug. 19, 2013
-
- Dimension updated
Version 8
Oct 13, 2011
-
- Dimension updated
Version 7
Jan 13, 2011
-
- Dimension updated
Version 6
Oct 13, 2010
-
- Rated voltage of 0201 extend to 50 V
- Capacitance range of 0201 X7R 6.3V to 16V extend to 100 pF
- Capacitance range of 0805 X7R 10V extend to 10 µF
- Capacitance range of 0805 X7R 50V extend to 1 µF
- Capacitance range of 1210 X7R 10V extend to 22 µF
- Figures of impedance ESR updated
Version 5
Jul 27, 2010
-
- Dimension on 0603 and 1206 case size updated
Version 4
Apr 21, 2010
-
- The statement of "Halogen Free" on the cover added
- Dimension updated
Version 3
Oct 26, 2009
-
- Capacitance range of 0402 X7R 25 V extend to 100 nF
Version 2
May 11, 2009
-
- Product range updated
Version 1
Apr 24, 2009
-
- Ordering code updated
Version 0
Apr 15, 2009
-
- New datasheet for general purpose and high capacitance X7R series
with RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: X7R_10V_9, X7R_16V-to-
100V_9, X7R_16-to-500V_9, UP-X5R_X7R_HighCaps_6.3-to-25V_11,
UY-X5R_X7R_HighCaps_6.3-to-25V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen Free compliant" added
- Test method and procedure updated
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Yageo:
CC0603JRX7R9BB391 CC0603JRX7R9BB271 CC0603JRX7R9BB101 CC0603JRX7R8BB183
CC0603JRX7R8BB682 CC0603JRX7R8BB683 CC0603JRX7R9BB122 CC0603JRX7R9BB561
CC0402KRX7R6BB102 CC0603JRX7R7BB223 CC0603JRX7R7BB224 CC0603JRX7R7BB334
CC0603JRX7R7BB393 CC0603JRX7R7BB563 CC0603JRX7R7BB683 CC0603JRX7R8BB102
CC0603JRX7R8BB153 CC0603JRX7R8BB332 CC0603JRX7R8BB333 CC0603JRX7R8BB823
CC0603JRX7R9BB331 CC0603JRX7R9BB473 CC0603JRX7R9BB821 CC0603JRX7R9BB273
CC0603JRX7R0BB152 CC0805KKX7R7BB475 CC0603KRX7R0BB223 CC0603KRX7R9BB105
CC0402KRX7R9BB223 CC1210KKX7R9BB106 CC0402KRX7R5BB105 CC0805KKX7R9BB225
CC0805KKX7R8BB475 CC0805JRX7R0BB103 CC0805JRX7R0BB472 CC1210KKX7RBBB473
CC0805JRX7R0BB222 CC1210MKX7R8BB226 CC0603KRX7R8BB474 CC1210KKX7R8BB226
CC0402KRX7R7BB224 CC1210KKX7RYBB224 CC0402KRX7R9BB104 CC0603KRX7R8BB334
CC0603KRX7R9BB224 CC0603KRX7R9BB751 CC1812JKX7R0BB334 CC1812KKX7RABB124
CC1812KKX7RYBB334 CC0805KRX7R8BB563 CC1206KKX7R0BB154 CC0201KRX7R9BB181
CC0805KRX7R0BB182 CC0805KRX7R0BB122 CC0805KRX7R0BB183 CC0805KRX7RABB561
CC0402KRX7R8BB271 CC0603JRX7R7BB471 CC1812MKX7RYBB474 CC0402KRX7R9BB751
CC1206KRX7RYBB561 CC1210JKX7R0BB224 CC0201KRX7R9BB391 CC0402JRX7R7BB562
CC1206KKX7R5BB475 CC1206JRX7R9BB221 CC1206JRX7RABB102 CC1812JKX7R9BB184
CC0201JRX7R9BB471 CC0201KRX7R6BB332 CC1206KKX7R9BB684 CC0201KRX7R6BB392
CC0402KRX7R8BB183 CC0402KRX7R8BB273 CC1206KKX7R0BB225 CC0402KRX7R9BB301
CC1210MKX7R6BB106 CC0201KRX7R6BB102 CC1206JRX7R9BB334 CC0603KRX7R6BB684
CC1206JRX7R9BB471 CC0402KRX7R8BB101 CC1206KKX7RABB273 CC0603MRX7R9BB104
CC0603KRX7R8BB151 CC1206JRX7RABB222 CC0805JRX7RABB331 CC0603JRX7R8BB224
CC1206JKX7RBBB103 CC1210MKX7R7BB106 CC1206KKX7RZBB221 CC0603KRX7RABB102
CC0402MRX7R7BB102 CC0201JRX7R9BB151 CC0201JRX7R7BB222 CC0603JRX7R8BB222
CC0805KRX7R7BB222 CC0805JRX7R7BB473 CC1206KKX7RCBB561 CC0201KRX7R6BB222