B69
1.27mm Pitch Two-Piece Connector
HIF6 Series
■Features
1. Product Variation
The connection method is available with the board to
board type and insulation displacement type.
2. Broad applications
HIF2E, HIF3B and HIF5 can be combined one other,
because the 1.27mm pitch flat cable is used.
3. Applicable Cables
The applicable cable is a (UL2651) AWG #28 flat cable
(7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm)
4. Mis-insertion Preventive Structure
The mis-insertion preventive guide prevents mis-
insertion.
Rating Current rating: 0.5A
Voltage rating:
125V AC
Operating Temperature Range: -55 to +85 ç (Note 1)
Operating Humidity Range: 40
to
80%
Storage Temperature Range: -10 to +60ç(Note 2)
Operating Humidity Range: 40 to 70% (Note 2)
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
250V DC
300V AC/1 minute.
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
500 cycles
Solder bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
1000M ohms min.
No flashover or insulation breakdown.
30m ohms max.
No electrical discontinuity of 1µs or more
Insulation resistance: 1000M ohms min.
Contact resistance: 30m ohms max.
No damage, cracks, or parts looseness.
No deformation of components affecting performance.
(-65ç: 30 minutes→15 to 35ç: 5 minutes max.→
125ç: 30 minutes
→
15 to 35ç: 5 minutes max.) 5 cycles
1.Insulation Resistance
2.Withstanding Voltage
3.Contact Resistance
4.Vibration
5.
Humidity (Steady state)
6.Temperature Cycle
7.
Durability (Mating/un-mating)
8.
Resistance to Soldering heat
Item Specification Condition
■Applications
Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines
■Product Specifications
●HIF3B Series (MIL-C-83503)
●HIF5 Series (Card edge type)
●HIF2 Series
(Board direct mount type)
●RC Series
(Micro ribbon connector) ●FD Series
(D sub-ribbon connector)
Photo1(For further information, refer to catalog page B86.)
Connector in combination with the HIF6 series connection type
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B70
HIF6 Series●1.27mm Pitch Two-Piece Connector
■Material
Insulator
Socket Contact
Pin header Contact
PBT
Copper alloy
Brass
Black
Selective gold plating
UL94V-0
————
Parts Material Finish Remarks
HIF6 A –
*
D A – 1.27 DSA L
qewtryui
qSeries Name : HIF6
wBlank : Ribbon cable insulation displacement type
A : With board mounting hole
B : Without board mounting hole
e
Number of contacts
: 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
rD : Socket or receptacle
tA : Selective gold plated
yContact pitch : 1.27mm
uContact type : DS : Right angle type
DSA : Straight type
R : Ribbon cable ID type
iL : Board pre-fixed lock pin
qSeries Name : HIF6
wBlank : With lock
A : With board mounting hole
B : Without board mounting hole
e
Number of contacts
: 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
rP : Pin header
tA : Selective gold plated
yContact pitch : 1.27mm
uContact style : DS : Right angle type
DSA : Straight type
iL : Board pre-fixed lock pin
●Socket and Receptacle
●Pin Header
■Ordering Information
qewt
ryui
HIF6 A –
*
P A – 1.27 DSA L
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B71
HIF6 Series●1.27mm Pitch Two-Piece Connector
BFunction Chart
Pin Header Socket or Receptacle Side
Right Angle
Type with lock
Straight Type
with lock
Right Angle
Type with
mounting hole
Straight Type
with mounting
hole
Right Angle
Type without
mounting hole
Straight Type
without
mounting hole
Right Angle
Type with
mounting hole
Two pieces of 1.27mm
pitch cable used
HIF2B series
HIF3B series
HIF5 series
Ribbon cable FD
(D sub) connector
Ribbon cable RC30
(Micro ribbon) connector
Straight Type
with mounting
hole
Right Angle
Type without
mounting hole
Straight Type
without
mounting hole
a2.54 pitch connector
(MIL-C-83503)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B72
HIF6 Series●1.27mm Pitch Two-Piece Connector
■Cable ID Connector
Unit: mm
YES
RoHSCL No.
HIF6-020D-1.27R
HIF6-026D-1.27R
HIF6-032D-1.27R
HIF6-034D-1.27R
HIF6-040D-1.27R
HIF6-050D-1.27R
HIF6-052D-1.27R
HIF6-060D-1.27R
HIF6-068D-1.27R
HIF6-080D-1.27R
HIF6-100D-1.27R
630-0001-4
630-0002-7
630-0003-0
630-0004-2
630-0005-5
630-0006-8
630-0007-0
630-0008-3
630-0009-6
630-0010-5
630-0011-8
20
26
32
34
40
50
52
60
68
80
100
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
69.35
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
13.95
17.76
21.57
22.84
26.65
33.00
34.27
39.35
44.43
52.05
64.75
16.35
20.16
23.97
25.24
29.05
35.40
36.67
41.75
46.83
54.45
67.15
A
Number of Contacts
B C DPart Number Unit: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B73
HIF6 Series●1.27mm Pitch Two-Piece Connector
■Pin Header Right Angle Type with lock
BPCB mounting pattern
●Indicate mark position. Mating Side
Note : Size F indicates the state where the lock is open.
Unit: mm
n = Number of Contacts
2
Mating Side
YES
RoHS
Part Number CL No. Unit: mm
HIF6-020PA-1.27DS
HIF6-026PA-1.27DS
HIF6-032PA-1.27DS
HIF6-034PA-1.27DS
HIF6-040PA-1.27DS
HIF6-050PA-1.27DS
HIF6-052PA-1.27DS
HIF6-060PA-1.27DS
HIF6-068PA-1.27DS
HIF6-080PA-1.27DS
HIF6-100PA-1.27DS
630-0051-2
630-0052-5
630-0053-8
630-0054-0
630-0055-3
630-0056-6
630-0057-9
630-0058-1
630-0059-4
630-0060-3
630-0061-6
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
24.55
28.36
32.17
33.44
37.25
43.60
44.87
49.95
55.03
62.65
75.35
21.59
25.40
29.21
30.48
34.29
40.64
41.91
46.99
52.07
59.69
72.39
43.55
47.36
51.17
52.44
56.25
62.60
63.87
68.95
74.03
81.65
94.35
Number of Contacts
A B C D E F
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B74
HIF6 Series●1.27mm Pitch Two-Piece Connector
■Pin Header Straight Type with lock
Note : Size G indicates a state where the lock is open.
Guide Key Side
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
●Indicate mark position.
Unit: mm
n = Number of Contacts
2
BPCB mounting pattern
Part Number CL No.
Unit: mm
HIF6-020PA-1.27DSA(71)
HIF6-026PA-1.27DSA(71)
HIF6-032PA-1.27DSA(71)
HIF6-034PA-1.27DSA(71)
HIF6-040PA-1.27DSA(71)
HIF6-050PA-1.27DSA(71)
HIF6-052PA-1.27DSA(71)
HIF6-060PA-1.27DSA(71)
HIF6-068PA-1.27DSA(71)
HIF6-080PA-1.27DSA(71)
HIF6-100PA-1.27DSA(71)
630-0101-9-71
630-0102-1-71
630-0103-4-71
630-0104-7-71
630-0105-0-71
630-0106-2-71
630-0107-5-71
630-0108-8-71
630-0109-0-71
630-0110-0-71
630-0111-2-71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
24.55
28.36
32.17
33.44
37.25
43.60
44.87
49.95
55.03
62.65
75.35
14.95
18.76
22.57
23.84
27.65
34.00
35.27
40.35
45.43
53.05
65.75
21.59
25.40
29.21
30.48
34.29
40.64
41.91
46.99
52.07
59.69
72.39
43.55
47.36
51.17
52.44
56.25
62.60
63.87
68.95
74.03
81.65
94.35
YES
Number of Contacts
A B C D E F G RoHS
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B75
HIF6 Series●1.27mm Pitch Two-Piece Connector
BPCB mounting pattern
Part Number CL No. Unit: mm
HIF6B-20DA-1.27DS(71)
HIF6B-26DA-1.27DS(71)
HIF6B-32DA-1.27DS(71)
HIF6B-34DA-1.27DS(71)
HIF6B-40DA-1.27DS(71)
HIF6B-50DA-1.27DS(71)
HIF6B-52DA-1.27DS(71)
HIF6B-60DA-1.27DS(71)
HIF6B-68DA-1.27DS(71)
HIF6B-80DA-1.27DS(71)
631-0051-9-71
631-0052-1-71
631-0053-4-71
631-0054-7-71
631-0055-0-71
631-0056-2-71
631-0057-5-71
631-0058-8-71
631-0059-0-71
631-0060-0-71
20
26
32
34
40
50
52
60
68
80
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
Number of Contacts
A11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
B C D
26.67
30.48
34.29
35.56
39.37
45.72
46.99
52.07
57.15
64.77
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
YES
ERoHS
(20, 32, 40, 52, 60, 68, 80 contacts)
*Lock pin type is
also available.
BApplication Pattern
(26, 34, 50 contacts) Mounting hole center line
Mating Side
Mating Side
Unit: mm
n = Number of Contacts
2
■Receptacle Right Angle Type with Mounting hole
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B76
HIF6 Series●1.27mm Pitch Two-Piece Connector
BPCB mounting pattern
(20, 32, 40, 52, 60, 68, 80 contacts)
BApplication Pattern
(26, 34, 50 contacts)
Mating Side
Mating Side
Part Number CL No. Unit: mm
HIF6A-20DA-1.27DS(71)
HIF6A-26DA-1.27DS(71)
HIF6A-32DA-1.27DS(71)
HIF6A-34DA-1.27DS(71)
HIF6A-40DA-1.27DS(71)
HIF6A-50DA-1.27DS(71)
HIF6A-52DA-1.27DS(71)
HIF6A-60DA-1.27DS(71)
HIF6A-68DA-1.27DS(71)
HIF6A-80DA-1.27DS(71)
631-0001-0-71
631-0002-3-71
631-0003-6-71
631-0004-9-71
631-0005-1-71
631-0006-4-71
631-0007-7-71
631-0008-0-71
631-0009-2-71
631-0010-1-71
20
26
32
34
40
50
52
60
68
80
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
Number of Contacts
A B C
YES
RoHS
Unit: mm
n = Number of Contacts
2
■Receptacle Right Angle Type Without Mounting hole
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B77
HIF6 Series●1.27mm Pitch Two-Piece Connector
Part Number CL No. Unit: mm
HIF6B-020DA-1.27DSA(71)
HIF6B-026DA-1.27DSA(71)
HIF6B-032DA-1.27DSA(71)
HIF6B-034DA-1.27DSA(71)
HIF6B-040DA-1.27DSA(71)
HIF6B-050DA-1.27DSA(71)
HIF6B-052DA-1.27DSA(71)
HIF6B-060DA-1.27DSA(71)
HIF6B-068DA-1.27DSA(71)
HIF6B-080DA-1.27DSA(71)
HIF6B-100DA-1.27DSA(71)
631-0151-3-71
631-0152-6-71
631-0153-9-71
631-0154-1-71
631-0155-4-71
631-0156-7-71
631-0157-0-71
631-0158-2-71
631-0159-5-71
631-0160-4-71
631-0161-7-71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
26.67
30.48
34.29
35.56
39.37
45.72
46.99
52.07
57.15
64.77
77.47
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
Number of Contacts
A B C
BApplication Pattern
Mounting hole center line
*Lock pin type is
also available.
Unit: mm
n = Number of Contacts
2
■Receptacle Straight Type with Mounting hole
(26, 34, 50 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
Guide Key Side
Guide Key Side
BPCB mounting pattern
D
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
69.35
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B78
HIF6 Series●1.27mm Pitch Two-Piece Connector
Part Number CL No. Unit: mm
HIF6A-020DA-1.27DSA(71)
HIF6A-026DA-1.27DSA(71)
HIF6A-032DA-1.27DSA(71)
HIF6A-034DA-1.27DSA(71)
HIF6A-040DA-1.27DSA(71)
HIF6A-050DA-1.27DSA(71)
HIF6A-052DA-1.27DSA(71)
HIF6A-060DA-1.27DSA(71)
HIF6A-068DA-1.27DSA(71)
HIF6A-080DA-1.27DSA(71)
HIF6A-100DA-1.27DSA(71)
631-0101-5-71
631-0102-8-71
631-0103-0-71
631-0104-3-71
631-0105-6-71
631-0106-9-71
631-0107-1-71
631-0108-4-71
631-0109-7-71
631-0110-6-71
631-0111-9-71
20
26
32
34
40
50
52
60
68
80
100
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
Number of Contacts
A B 18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
69.35
C
YES
RoHS
Unit: mm
n = Number of Contacts
2
■Receptacle Straight Type without Mounting hole
BApplication Pattern
(26, 34, 50 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BPCB mounting pattern
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B79
HIF6 Series●1.27mm Pitch Two-Piece Connector
■Pin Header Right Angle Type with Mounting hole
Unit: mm
n = Number of Contacts
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BApplication Pattern
(26, 34, 50 contacts)
Mounting hole center line
πLock pin type is
also available.
Mating Side
Mating Side
Part Number CL No. Unit: mm
HIF6B-020PA-1.27DS(71)
HIF6B-026PA-1.27DS(71)
HIF6B-032PA-1.27DS(71)
HIF6B-034PA-1.27DS(71)
HIF6B-040PA-1.27DS(71)
HIF6B-050PA-1.27DS(71)
HIF6B-052PA-1.27DS(71)
HIF6B-060PA-1.27DS(71)
HIF6B-068PA-1.27DS(71)
HIF6B-080PA-1.27DS(71)
HIF6B-100PA-1.27DS(71)
631-0251-8-71
631-0252-0-71
631-0253-3-71
631-0254-6-71
631-0255-9-71
631-0256-1-71
631-0257-4-71
631-0258-7-71
631-0259-0-71
631-0260-9-71
631-0261-1-71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
Number of Contacts
A20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
B18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
C11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
26.67
30.48
34.29
35.56
39.37
45.72
46.99
52.07
57.15
64.77
77.47
E
YES
RoHSD
BPCB mounting pattern
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B80
HIF6 Series●1.27mm Pitch Two-Piece Connector
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BApplication Pattern
(26, 34, 50 contacts)
Mating Side
Mating Side
Part Number CL No. Unit: mm
HIF6A-020PA-1.27DS(71)
HIF6A-026PA-1.27DS(71)
HIF6A-032PA-1.27DS(71)
HIF6A-034PA-1.27DS(71)
HIF6A-040PA-1.27DS(71)
HIF6A-050PA-1.27DS(71)
HIF6A-052PA-1.27DS(71)
HIF6A-060PA-1.27DS(71)
HIF6A-068PA-1.27DS(71)
HIF6A-080PA-1.27DS(71)
HIF6A-100PA-1.27DS(71)
631-0201-0-71
631-0202-2-71
631-0203-5-71
631-0204-8-71
631-0205-0-71
631-0206-3-71
631-0207-6-71
631-0208-9-71
631-0209-1-71
631-0210-0-71
631-0211-3-71
20
26
32
34
40
50
52
60
68
80
100
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
Number of Contacts
A B C
YES
RoHS
Unit: mm
n = Number of Contacts
2
■Pin Header Right Angle Type Without Mounting hole
BPCB mounting pattern
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B81
HIF6 Series●1.27mm Pitch Two-Piece Connector
Part Number CL No. Unit: mm
HIF6B-020PA-1.27DSA(71)
HIF6B-026PA-1.27DSA(71)
HIF6B-032PA-1.27DSA(71)
HIF6B-034PA-1.27DSA(71)
HIF6B-040PA-1.27DSA(71)
HIF6B-050PA-1.27DSA(71)
HIF6B-052PA-1.27DSA(71)
HIF6B-060PA-1.27DSA(71)
HIF6B-068PA-1.27DSA(71)
HIF6B-080PA-1.27DSA(71)
HIF6B-100PA-1.27DSA(71)
631-0351-2-71
631-0352-5-71
631-0353-8-71
631-0354-0-71
631-0355-3-71
631-0356-6-71
631-0357-9-71
631-0358-1-71
631-0359-4-71
631-0360-3-71
631-0361-6-71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
Number of Contacts
A26.67
30.48
34.29
35.56
39.37
45.72
46.99
52.07
57.15
64.77
77.47
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
B C D E
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
RoHS
YES
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BApplication Pattern
Mounting hole center line
Guide Key Side
Guide Key Side
*Lock pin type is
also available.
BPCB mounting pattern
Unit: mm
n = Number of Contacts
2
(26, 34, 50 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
■Pin Header Straight Type with Mounting hole
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B82
HIF6 Series●1.27mm Pitch Two-Piece Connector
Guide Key Side
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BApplication Pattern
Part Number CL No. Unit: mm
HIF6A-020PA-1.27DSA(71)
HIF6A-026PA-1.27DSA(71)
HIF6A-032PA-1.27DSA(71)
HIF6A-034PA-1.27DSA(71)
HIF6A-040PA-1.27DSA(71)
HIF6A-050PA-1.27DSA(71)
HIF6A-052PA-1.27DSA(71)
HIF6A-060PA-1.27DSA(71)
HIF6A-068PA-1.27DSA(71)
HIF6A-080PA-1.27DSA(71)
HIF6A-100PA-1.27DSA(71)
631-0301-4-71
631-0302-7-71
631-0303-0-71
631-0304-2-71
631-0305-5-71
631-0306-8-71
631-0307-0-71
631-0308-3-71
631-0309-6-71
631-0310-5-71
631-0311-8-71
20
26
32
34
40
50
52
60
68
80
100
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
YES
Number of Contacts
A B C RoHS
BPCB mounting pattern
Unit: mm
n = Number of Contacts
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
■Pin Header Straight Type Without Mounting hole
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B83
HIF6 Series●1.27mm Pitch Two-Piece Connector
Connection of Cable 1
A1b1
A2b2
An bn
Connection of Cable 2
B1a1
B2a2
Bn an
······
······
······
······
Type A, A
A1an
A2an 1
An a1
······
······
······
······
B1bn
B2bn 1
Bn b1
Connection of Cable 1 Connection of Cable 2
Type A, B
BConnection Circuit (20, 32, 40, 52, 60, 68, 80, 100 contacts)
n = Number of Contacts
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B84
HIF6 Series●1.27mm Pitch Two-Piece Connector
Connection of Cable 1
A1b1
A2b2
An bn
Connection of Cable 2
B1a1
B2a2
Bn an
······
······
······
······
Type A, A
A1an
A2an 1
An a1
······
······
······
······
B1bn
B2bn 1
Bn b1
Connection of Cable 1 Connection of Cable 2
Type A, B
BConnection Circuit (26, 40, 50 contacts)
n = Number of Contacts
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B85
HIF6 Series●1.27mm Pitch Two-Piece Connector
●Cable Cutter
HIF6 Cable Cutter-FC601
CL550 - 0166 - 0
●
Instruction Manual for HIF6 Connection Service Method
14 Pages
BConnection Jig
●Guide Plate
HIF 6 - GPA
CL550 - 0165 - 8
●Hi-Flex Connection Press
Part Number CL No.
Pressing Block A-01
550-0133-1
*Pressing Block
Hi-Flex Connection Press HHP502
CL550 - 0082 - 2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B86
HIF6 Series●1.27mm Pitch Two-Piece Connector
■HIF6 Series: Connection Type Coupled Connector
FD Series (D sub-ribbon connector)
●The standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a
jig, in addition to the same pitch 1.38mm as for the D sub connector.
●The space saving type allows to reduce the thickness on the connection side according
to set miniaturization.
●Connectors can be installed from both front and rear sides of the chassis or panel.
Number of contacts: 9, 15, 25, 37
RC Series (Micro ribbon connector)
●Since the cable insulation displacement area is standard pitch 1.27mm, the standard
ribbon cable can be easily utilized.
●Countermeasures are taken against noises in combination with the cover case.
●Cover case is light weight and compact.
●Straight and right angle types are installed on the dip side.
Number of contacts: 14, 24, 36, 50
HIF3B Series (MIL-C-83503)
●Compliant with the MIL standard
●The VA idea is reflected on both pin header and socket.
●Products with pull-out tab are available.
●
Countermeasures are taken against noises in combination with the applicable cover case.
●The type aligned in single-row, low profile type, is available for pin header locking
system, in addition to standard products.
Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64
HIF2 Series (Board direct mount type)
12-row parallel type (HIF2E)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
2.54mm grid alignment facilitates to the design pattern.
24-row staggered type (HIF2C)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
Mounting height is 4.9mm low profile type.
HIF5 Series (Card edge ribbon type)
●
Three types of full hole, semi-hole and no mount area are provided for the unit mount area.
●Connectors are connected in the bus line system.
●Cables can be returned within the connector mold width.
Number of contacts: 20, 26, 34, 40, 50, 60
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
