4.0 With mating entry face 3.5 Without mating entry face 6.85 5.55 7.1 With mating entry face 6.6 Without mating entry face 11.0 4.00 H 5x 0.300.10 G 1.300.10 2.600.10 Cap 5.3 0.2 3.2 1.8 7.15 0.25 PCB Mount &Cap Information F (2.06) 6.50 0.50 E f) (re Specifications 1.18 3.500.10 .50 O2 +0.05 -0.08 2.70 Material Plastic Housing: LCP, UL94V-0, Black Contact Terminal: Copper Alloy Metallic Shell: Stainless Steel T=0.25mm. (3.42) LOGO Area 0.600.05 Pick & place cap Plating Contact Terminal: Contact Area:30" Gold Solder Tails: Gold Flash Underplating: 50" Nickel Metallic Shell: Matte Tin over 50" Nickel Pick & place area (3.40) Section A-A 4.750.10 Pin 1 1.50 1.64 0.10 0.40 0.60 25 R0 . Electrical Voltage Rating: 30 V AC Current Rating: Signal (Pins 2,3,4): 1.0 A. Power (Pins1,5): 1.8A. Operating Temperature: -30C to +85C. Contact Resistance: 30m max. Insulating Resistance: 1000M min. Dielectric Withstand Voltage: 500V AC/minute 2x 1.95 A 0.80 0.050.05 3.50Max .2 5 2.77 R0 0.65 0.360.10 1.85+0.08 -0.02 D Pin 5 2.60 6.00 6.90+0.06 -0.02 2x 1.15 7.80 Pin 1 A PIN 5 Optional Mating Entry faces C 1.40 1.10 7.15 Recommended PCB Layout As viewed from component side General tolerance: 0.05 Component Outline Solder Area Ordering Grid 30 XXXX X C Mechanical & Environmental Mating Force: 35N max. Unmating Force:Initial 10N min Final 8N min after durability test Durability: 10,000 Cycles Request Samples and Quotation Packing Options C = Tape & Reel with Cap Contact Plating 30 = 30" Gold (1.7mm stake shown) B S0.20 USB3140 (500 per reel) Shell Stake Length "S" 0070 = 0.70mm 0170 = 1.70mm (recommended for 1.00mm PCB) 0230 = 2.30mm (recommended for 1.60mm PCB) Mating Entry Face 1 = With Mating Entry Face (Standard) 0 = Without Mating Entry Face Part Number Product Description USB3140 Micro USB Receptacle, Type B, Surface Mount, Vertical, with Through-Hole Shell Stakes Drawing Date A 2nd April 2013 Designed to comply with physical, electrical and environmental requirements of Micro USB Standard (USB2.0) 1 2 3 By Detail 4 Revision Date 5 CC USB3140 E PCN E 16/01/19 Tolerances (Except as Noted) Length Angle X.0.50 X.X 0.30 X.XX 0.20 X.XXX 0.10 X.X 2 Units: Metric (mm) C 3rd Angle Projection 6 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE www.gct.co Not to Scale Drawn By AJO 8 Sheet No. 1/2 30.4 Tape & Reel Label 24.4 H in Peeling Angle 165 ~ 180 O330 400 m G Vacuum Bag 15 pcs min Empty F End of reel 15 pcs min Empty Start of reel Packing 500pcs product -0 0.1 .0 0 0 4.000.10 12.000.10 Inner carton dimensions: 340mm x 340mm x 285mm 21.30 11.500.15 24.000.30 O E Void filler 2.000.10 1. 50 + 1.750.15 User Direction of Unreeling Cover Tape. D Box dimensions: 355mm x 355mm x 305mm C Notes: Peeling off force of top tape: 0.1-1.3N (Peeling direction as shown) Materials: Carrier Tape: Polystyrene (PS) Top Tape: PE Reel Tape: Polystyrene (PS) B Pcs / Reel Reels / Carton 500 Product Description Micro USB Receptacle, Type B, Surface Mount, Vertical, with Through-Hole Shell Stakes By Detail Revision Date 2 3 4 4500 pcs USB3140 2nd April 2013 1 Total Quantity Part Number Drawing Date A 9 5 CC USB3140 E PCN E 16/01/19 Tolerances (Except as Noted) Length X.0.20 X.X 0.15 X.XX 0.10 X.XXX 0.05 Angle Units: Metric (mm) X.X 2 C 3rd Angle Projection 6 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE www.gct.co Not to Scale Drawn By AJO 8 Sheet No. 2/2