product announcement Panel Mount Connectors Now wireless RF system designers and engineers can improve system performance, lower system IMD, and increase system reliability with Panel Mount Connectors from Andrew Corporation. Featuring a machined-in raised ring that maintains consistent contact pressure, Andrew Panel mount connectors are available in both four-hole flange and bulkhead configurations for high performance applications where low intermodulation and design flexibility are required. Panel Mount Connectors are designed for PCB launch applications in antennas, filters, power dividers, and amplifiers. Better System Performance * Contact relief--excellent IMD performance * Tri-Metal plating--no connector tarnishing Better System Reliability * Weatherproofing O-ring*--seals out moisture Easier Installation * Four-hole flange and bulkhead configurations available Design Flexibility * Contact Variety - Allows for customized solutions** *Not available on SMA version ** Contact Andrew for customized configurations Complete RF Subsystem Solutions new 4x o3.60 product announcement 5.00 o41.70 TYP. 4.50 4x o3.60 o41.70 TYP. 21.70 5.00 4.50 o2.44 o2.44 o3.00 24.75 SQ. 32.00 SQ. 0.10 9.00 o3.00 8.00 24.75 SQ. 32.00 SQ. 38.70 0.10 8.00 5.00 34.70 DFPM-SC-9 (7-16 DIN Female) DFPM-SC (7-16 DIN Female) Electrical Electrical Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 Mechanical Mechanical Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount 5.00 4.50 4x o3.60 M29X1.5 4.50 M3X0.5 o2.44 (0.10) o3.00 A 16.60 24.75 SQ. 32.00 SQ. 21.70 (4.50) 0.10 (21.70) A (2:1) 4x o3.60 4x o41.70 24.75 SQ. 32.00 SQ. 0.10 9.00 8.00 50.62 DFPM-M3 (7-16 DIN Female) DMPM-SC-9 (7-16 DIN Male) Electrical Electrical Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 Mechanical Mechanical Inner Attachment Method . . . . . . . . . . . . . . . . . . .M3 Thread Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount 32.00 SQ. 5.00 24.75 SQ. 32.95 REF. 4.50 o42.00 18.90 25.40 SQ. 18.25 TYP. 14.05 4x o31.70 o2.45 o3.00 0.81 x 3.18 DEEP o3.04 0.10 4x o3.60 13.00 4x o3.30 46.62 REF. 3.50 DMPM-SC (7-16 DIN Male) NFPM-ST (N-Female) Electrical Electrical Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.0 Mechanical Mechanical Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount Inner Attachment Method . . . . . . . . . . . . . . . . . . .Slot Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount 28.20 REF. 18.90 14.55 REF. 25.40 SQ. 18.25 TYP. 9.30 9.50 12.70 SQ. 5.05 o0.75 o1.27 o2.20 o3.04 8.58 TYP. 4x o15.90 4x o31.70 4x o3.30 1.70 3.50 4x o2.60 NFPM-SC (N-Female) SFPM-SC (SMA Female) Electrical Electrical Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.0 Recommended Maximum Operating Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18.0 Mechanical Mechanical Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount Electrical Environmental 3rd Order IM, Product Typical @ 910 MHz, -dBm .125 3rd Order IM Test Method . . . . . . . . . . . . . . . . . . . . . .Two + 43 dBm Carriers Nominal Impedence, Ohms . . . . . . . . . . . . . . . . . . . . .50 Insertion Loss, max, dB . . . . . . . . . . . . . . . . . . . . . . . . .0.05frequency (GHz) Connector Return Loss, dB 0 - 2.2 GHz . . . . . . . . . . .-40 Moisture Resistance Test . . . . . . . . . . . .MIL-STD-202, Method 106 Mechanical Shock Test . . . . . . . . . . . . . .MIL-STD-202F, Method 213B, Test Cond. C Operating Temperature Range, C . . . .-55 to 150 Complete RF Subsystem Solutions Andrew Corporation Customer Support Center Internet 10500 W. 153rd Street Orland Park, IL 60462 USA From North America: Telephone: 1-800-255-1479 Fax: 1-800-349-5444 International: Telephone: +1-708-873-2307 Fax: +1-708-349-5444 www.andrew.com Fax-On-Demand From North America: 1-800-861-1700 International: +1-708-873-3614 All designs, specifications and availabilities of products and services presented in this bulletin are subject to change without notice. Bulletin 10774 (10/02) Copyright (c) 2002 Andrew Corporation, Orland Park, IL 60462 USA Printed in USA