product announcement
Now wireless RF system designers and
engineers can improve system performance,
lower system IMD, and increase system
reliability with Panel Mount Connectors from
Andrew Corporation.
Featuring a machined-in raised ring that maintains
consistent contact pressure, Andrew Panel mount
connectors are available in both four-hole flange and
bulkhead configurations for high performance
applications where low intermodulation and design
flexibility are required. Panel Mount Connectors are
designed for PCB launch applications in antennas,
filters, power dividers, and amplifiers.
Better System Performance
•Contact relief--excellent IMD performance
•Tri-Metal plating—no connector tarnishing
Better System Reliability
•Weatherproofing O-ring*--seals out moisture
Easier Installation
•Four-hole flange and bulkhead configurations
available
Design Flexibility
•Contact Variety – Allows for customized solutions**
*Not available on SMA version
** Contact Andrew for customized configurations
Complete RF Subsystem Solutions
Panel Mount Connectors
product announcement
new
4x ø3.60
24.75 SQ.
5.00 4.50
0.10 9.00
38.70
8.00
ø2.44
ø3.00
32.00 SQ.
ø41.70 TYP. 4x ø3.60
24.75 SQ.
5.00
21.70
4.50
0.10
5.00
34.70
8.00
ø2.44
ø3.00
32.00 SQ.
ø41.70 TYP.
4x ø3.60 M29X1.5
M3X0.5
24.75 SQ.
4.50
0.10
16.60
21.70
(0.10)
(4.50)
(21.70)
A (2:1)
A
32.00 SQ.
4x ø3.60 4x ø41.70
ø2.44
ø3.00
4.50
5.00
24.75 SQ.
32.00 SQ.
0.10 9.00
50.62
8.00
DFPM-SC-9 (7-16 DIN Female)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
DFPM-SC (7-16 DIN Female)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
DFPM-M3 (7-16 DIN Female)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .M3 Thread
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
DMPM-SC-9 (7-16 DIN Male)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
4x ø3.60
ø42.00
ø2.45
ø3.00
4.50
5.00
24.75 SQ.
32.00 SQ.
0.10
46.62 REF.
13.00
28.20 REF.
18.90 9.30
3.50
ø3.04
ø2.20
4x ø3.30
4x ø31.70
25.40 SQ.
18.25 TYP.
32.95 REF.
18.90 14.05
3.50
ø3.04
0.81 x 3.18
DEEP
4x ø3.30
4x ø31.70
25.40 SQ.
18.25 TYP.
4x ø2.60
4x ø15.90
12.70 SQ.
8.58 TYP.
14.55 REF.
9.50 5.05
1.70
ø1.27
ø0.75
Electrical
3rd Order IM, Product Typical @ 910 MHz, -dBm .125
3rd Order IM Test Method . . . . . . . . . . . . . . . . . . . . . .Two + 43 dBm Carriers
Nominal Impedence, Ohms . . . . . . . . . . . . . . . . . . . . .50
Insertion Loss, max, dB . . . . . . . . . . . . . . . . . . . . . . . . .0.05√frequency (GHz)
Connector Return Loss, dB 0 - 2.2 GHz . . . . . . . . . . .-40
Environmental
Moisture Resistance Test . . . . . . . . . . . .MIL-STD-202, Method 106
Mechanical Shock Test . . . . . . . . . . . . . .MIL-STD-202F, Method 213B,
Test Cond. C
Operating Temperature Range, ºC . . . .-55 to 150
DMPM-SC (7-16 DIN Male)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
NFPM-SC (N-Female)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.0
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
NFPM-ST (N-Female)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.0
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Slot
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
SFPM-SC (SMA Female)
Electrical
Recommended Maximum Operating
Frequency, GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18.0
Mechanical
Inner Attachment Method . . . . . . . . . . . . . . . . . . .Solder Cup
Outer Attachment Method . . . . . . . . . . . . . . . . . . .Flange Mount
All designs, specifications and availabilities of
products and services presented in this bulletin
are subject to change without notice.
Bulletin 10774 (10/02) Copyright © 2002
Andrew Corporation, Orland Park, IL 60462 USA
Printed in USA
Complete RF Subsystem Solutions
Andrew Corporation
10500 W. 153rd Street
Orland Park, IL 60462 USA
Customer Support Center
From North America:
Telephone: 1-800-255-1479
Fax: 1-800-349-5444
International:
Telephone: +1-708-873-2307
Fax: +1-708-349-5444
Internet
www.andrew.com
Fax-On-Demand
From North America:
1-800-861-1700
International:
+1-708-873-3614
