107-68780 Packaging Specification 27Aug09 Rev D SFF connector 1. PURPOSE Define the packaging specifiction and packaging method of SFF connector. SFF connector 2. APPLICABLE PRODUCT TYPE Product Description Part No. TYPE A (Partition) TYPE B (T&R) TYPE C (T&R) TYPE D (Tube) 1888321-1~11 RECEPTACLE SHIELD ASSEMBLY, SFF 1761987-7/8/9 1-1761987-6/7/8 CONNECTOR ASSEMBLY. RECEPTACLE, RIGHT ANGLE, SURFACE MOUNT, SFF 1888019-2/4/6/8/9/10/11/12 SHIELDED RIGHT ANGLE RECEPTACLE CONNECTOR ASSEMBLY, SFF 1888861-2/4/6/8/9 1-1888861-0/1/2 SHIELDED RIGHT ANGLE, RECEPTACLE CONNECTOR ASSEMBLY, SFF 1888020-3/4/7/8 VERTICAL RECEPTACLE CONNECTOR ASSY, SURFACE MOUNT, SFF 1888863-4/8/9/10 UNKEYED SHIELDED VERTICAL RECEPTACLE CONNECTOR ASSEMBLY, THRU HOLE, SFF 1761987-1/2/3/4/5/6/11 CONNECTOR ASSEMBLY. RECEPTACLE, RIGHT ANGLE, SURFACE MOUNT, SFF 1888174-2/-4/-6/-7/-8/-9 SHIELDED VERTICAL RECEPTACLE CONNECTOR ASSEMBLY, THRU HOLE, SFF 1888957-1 1888020-1/2/5/6 T-H Shld'd Vert Recpt Assm 36P Mini-SAS VERTICAL RECEPTACLE CONNECTOR ASSY, SURFACE MOUNT, SFF 3. PACKAGING MATERIAL For TYPE A (Partition packaging): Usage Package INNER OUTER 1888321-2 1-1888321-0/1 364x142x38.9( 7x9 cell) - 1/63 Partition 364x142x24.9( 8x9 cell) 1/72 - Paper pad 335x142 6/360 4/189 - - - - Shipping box 349x147x146 1/360 1/189 Outer label 102x102 1/360 1/189 Description Size(mm) 1-999603-4 Partition 1-999603-5 110756-6 MIDDLE 1888321-1 1888321-6/7/8/9 Part No. 12110 623865-1 DR CHK APVD Sam Wu Davis Jia Ansin Yang Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 9 LOC FR 107-68780 3. PACKAGING MATERIAL For TYPE A (Partition packaging): Inner Middle Outer LABEL - - 623865-1 SEALING - - Tape For TYPE B (Emboss tape packaging): Usage Package INNER Description 1761987-7 1-1761987-6 1761987-8 1-1761987-7 1761987-9 1-1761987-8 1706300-1 Carrier tape(24W) 8.8 MR/400 - - 1706301-1 Carrier tape(32W) - 8.8 MR/400 - 1706337-1 Carrier tape(32W) - - 8.8 MR/400 Part No. (2-1533123-4) PS tape(24W) 9.24 MR/400 - - (4-1533151-5) PS tape(24W) - 9.24 MR/400 9.24 MR/400 2-1533127-4 Cover tape 10.0 MR/400 - - 3-1533127-2 Cover tape - 10.0 MR/400 10.0 MR/400 (1-1533128-4) Plastic reel(330DX24W) 1/400 - - (1-1533128-5) Plastic reel(330DX32W) - 1/400 1/400 1/400 1/400 1/400 - - - 623865-4 MIDDLE OUTER - Inner label - 912030-3 Shipping box 1/1600 1/1200 1/1200 623881-1 Bubble pack - 3/1200 3/1200 623865-1 Outer label 1/1600 1/1200 1/1200 Inner Middle Outer LABEL 623865-4 - 623865-1 SEALING Tape - Tape For TYPE C (Emboss tape packaging): Usage Package INNER Part No. 1888020-4/8 1888020-7 1706284-1 Carrier tape(44W) 4.34 MR/125 - - 1706285-1 Carrier tape(44W) - 4.80 MR/200 - 1533245-3 Carrier tape(24W) - - 8.60 MR/400 (4-1533151-6) PS TAPE(44*0.4 BLACK) 2.5 MR/125 2.5 MR/200 - (5-1533151-4) PS TAPE(24*0.5 BLACK) - - 11.53 MR/400 (1-1533174-1) Plastic reel 1/125 1/200 - (1533174-3) Plastic reel 4-1533127-4 Cover tape(HAA) 2-1533127-4 Cover tape(HAA) 623865-4 Rev D Description 1888019-2/4/6/8/9/10/11/12 1888861-2/4/6/8/9 1-1888861-0/1/2 QR-ME-030B Paper pad 1/400 5.88 MR/125 6.383 MR/200 - - - 10.345 MR/400 1/125 1/200 1/400 2 of 9 107-68780 3. PACKAGING MATERIAL For TYPE C (Emboss tape packaging): Usage 1888019-2/4/6/8/9/10/11/12 1888861-2/4/6/8/9 1-1888861-0/1/2 1888020-4/8 1888020-7 BUBBLE BAG 1/125 1/200 1/400 SHIPPING BOX 1/375 1/600 1/2400 623881-5 AIR CAP 4/375 4/600 4/2400 623897-5 PAPER PAD, FOLDER 4/375 4/600 4/2400 623865-1 OUTER LABEL 1/375 1/600 1/2400 Package Part No. MIDDLE 623880-4 1-1533040-9 OUTER Description Inner Middle Outer LABEL 623865-4 - 623865-1 SEALING Tape - Tape For TYPE D (Tube packaging): OUTER 1761987-3 1761987-4 1761987-5 1761987-6 1888020-1/5 1888020-2/6 MIDDLE Description 1761987-2/11 INNER Part No. 1761987-1 Package 1888863-4/8/9/10 1888957-1 1888174-2/4/6/7/8/9 Usage 1706345-1 Tube 1/26 - - - - - - - - 1533263-5 Tube - - - - - - - 1/39 1/30 110985-3 Tube - 1/39 1/30 1/23 1/21 1/29 1/17 - - 1533225-5 END PLUG - - - - - - - 2/39 2/30 1533223-5 END PLUG 2/26 - - - - - - - - 112079-2 END PLUG - 2/39 2/30 2/23 2/21 2/29 2/17 - - 623126-1 Inner label 1/26 1/39 1/30 1/23 1/21 1/29 1/17 1/39 1/30 - - - - - - - - - - - 995011-6 Shipping box 1/390 1/2184 1/1170 1/897 1/819 1/1421 1/663 1/1755 1/1350 1540046-1 FOAM PAD 3/390 3/2184 3/1170 3/897 3/819 3/1421 3/663 3/1755 3/1350 912065-2 Bubble pack 1/390 1/2184 1/1170 1/897 1/819 1/1421 1/663 1/1755 1/1350 623865-1 Outer label 1/390 1/2184 1/1170 1/897 1/819 1/1421 1/663 1/1755 1/1350 Inner Middle Outer LABEL 623126-1 - 623865-1 SEALING Tape - Tape Rev D QR-ME-030B 3 of 9 107-68780 4. PACKAGING QUANTITY TYPE TYPE A TYPE B TYPE C TYPE D Product No. Inner Middle Outer 1888321-1/6/7/8/9 72 pcs/Partition - 360 pcs/box 1888321-2/10/11 63 pcs/Partition - 189 pcs/box 1761987-7 400 pcs/reel - 1600 pcs/box 1761987-8/9 400 pcs/reel - 1200 pcs/box 1888019-2/4/6/8/9/10/11/12 125 pcs/reel - 375 pcs/box 1888861-2/4/6/8/9 1-1888861-0/1/2 125 pcs/reel - 375 pcs/box 1888020-4/8 200 pcs/reel - 600 pcs/box 1888863-4/8/9/10 26 pcs/tube - 390 pcs/box 1888174-2/4/6/7/8/9 26 pcs/tube - 390 pcs/box 1761987-1 39 pcs/tube - 2184 pcs/box 1761987-2/11 30 pcs/tube - 1170 pcs/box 1761987-3 23 pcs/tube - 897 pcs/box 1761987-4 21 pcs/tube - 819 pcs/box 1761987-5 29 pcs/tube - 1421 pcs/box 1761987-6 17 pcs/tube - 663 pcs/box 1888957-1 26 pcs/tube - 390 pcs/box 1888020-1/5 39 pcs/tube - 1755 pcs/box 1888020-2/6 30 pcs/tube - 1350 pcs/box 5. PACKING METHOD For TYPE A: 5.1. Set up a shipping box and secure bottom flaps with tape. 5.2. Place one piece of paper pad on bottom of box. 5.3. Place one piece of partition assy. On the top of paper pad. 5.4. Place specified products as 4 in partition, one CONN. each cell. 4 5.5. Place one piece of paper pad on top of partition. 5.6.1. Only for 1888321-1/6/7/8/9: Repeat step 5.3.~5.5. four times. 5.3.~5.5. Rev D QR-ME-030B 4 of 9 107-68780 5. PACKING METHOD Only for 1888321-2/10/11: 5.6.2. Repeat step 5.3.~5.5. two times. 5.3.~5.5. 110455-2 5.7. Place one piece of air cap on the top of paper pad. 5.8. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" For TYPE B: 5.1. Fix a plastic reel on machine. 5.2. Reel one circle cover tape and 15 empty pockets carrier sealed with cover tape onto reel core. 15 5.3. Inner packaging specification will be fixed based on action packing machine's operation. 1 15 pocket 2 ( Tape ) Carrier 5.4. Stick the end of cover tape. 5.5. Take off the reel &place an inner label on the reel full of products. 5.6. Set up a box and secure bottom flaps with tape. 5.7. Place one piece of air cap into bottom of box, bubble facing down. (623881-1) 1761987-7 Rev D QR-ME-030B 5 of 9 107-68780 5. PACKING METHOD 5.8. Place specified reels as 4 have inner packaged into box. 4 5.9. Place two pieces of air cap on top of reel, bubble facing up. (623881-1) 1761987-7 5.10. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" For TYPE C (Refer to Page 9 of 9: PACKAGING ILLUSTRATION): 5.1. Place one plastic reel on machine. 5.2. Reel one circle of cover tape & 10~15 pockets of empty carrier sealed with cover tape onto reel core. Note: Cover tape stick method must be thermo-compression bonding type 10~15pocket(COVER TPAE ) 5.3. Inner packaging specification will be fixed based on action packing machine's operation. 1 15 pocket 2 ( Tape ) Carrier 5.4. Stick the end of cover tape. (10mm) 12PS tape(4-1533151-65-1533151-4),PS tape 1 Rev D QR-ME-030B 6 of 9 107-68780 5. PACKING METHOD 5.5. Take off the plastic reel. 5.6. Place an inner label on the reel full of products. 5.7. Set up a box and secure bottom flaps with tape. 5.8. Set up four paper pads into triangle prism shape with tape secured and place the paper pads against the coner of shipping box. 5.9. Place two pieces of air cap (623881-5) in the bottom of box, bubble face down. (623881-5) 5.10. Place one reel into air cap bag and secure the bag opening with adhensive tape. 5.11. Place 3 reels wraped in air cap bag into box. 3 5.12. Place two pieces of air cap (623881-5) on the top(bubble up) and close cover of the box. (623881-5) 5.13. Seal the box with tape. And place one product identification label in "product id" marked on box. "PRODUCT ID" For TYPE D: 5.1. Place one end plug in one end of tube. TUBE 5.2. Place the quantity as table 4 of connectors into the tube. 4TUBE Rev D QR-ME-030B 7 of 9 107-68780 5. PACKING METHOD 5.3. Place end plug in other end of tube. TUBE : TUBE , . TUBE . 5.4. Place label on tube in approximate middle. TUBE 5.5. Set up the box and close the bottom of the box with tape. 5.7. Place foam blocks at end ( 2 pcs) at box joint end and the other one block at the opposite end. PE FOAM(1). 5.8. Place one piece of air cap in the bottom of shipping box, buubble faceing down(see figure 2). (2). PE FOAM 2:PE FOAM , . 5.9. Place tubes have packaged as 4 on the air cap in the same orientation and wrap tubes with air cap(see figure 3). 4tubeTUBE(3) 3:TUBE TUBE. 5.10. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev D QR-ME-030B 8 of 9 107-68780 5. PACKING METHOD PACKAGING ILLUSTRATION (Only for TYPE C): P/N:1-1533174-1 Rev D QR-ME-030B 9 of 9