SKHU 6.2 x 6.3mm (Surface Mount Type) TACT SwitchTM A wide variety of products including dust-proof type Typical Specifications Items Specifications Sharp Feeling Ratingmax. 50mA 12V DC Ratingmin. 10A 1V DC Initial contact resistance 100m max. Travelmm 0.25 Soft Feeling Product Line Top push type Snap-in Type Surface Mount Type Product No. Operating force SKHUAKE010 0.98N SKHUALE010 1.57N SKHUAME010 2.55N Operating direction Operating life 5mA 5V DC Stem color Stem height Minimum order unitpcs. Japan Export Drawing No. 3,000 3,000 1 Green 300,000 cycles Top push Black Radial Type 100,000 cycles Red Operating life 5mA 5V DC Stem color 2.5mm With ground terminal type Product No. Operating force SKHUPKE010 0.98N SKHUPLE010 1.57N SKHUPME010 2.55N Operating direction Stem height Minimum order unitpcs. Japan Export Drawing No. 3,000 3,000 2 Green 300,000 cycles Black Top push 100,000 cycles Red 2.5mm Dust-proof type Product No. Operating force Operating direction Operating life 5mA 5V DC Stem color Stem height SKHUBHE010 1.57N Top push 50,000 cycles Brown 3.1mm Operating direction Operating life 5mA 5V DC Stem color Stem height Top push 50,000 cycles Minimum order unitpcs. Japan Export Drawing No 3,000 3,000 3 Dust-proof and with ground terminal type Product No. Operating force SKHUQHE010 1.57N SKHUQGE010 2.55N Minimum order unitpcs. Japan Export Drawing No 3,000 3,000 4 Brown 3.1mm Red Packing Specifications Taping Unit:mm Number of packagespcs. 1 reel 3,000 1 case / Japan 1 case / export packing 30,000 30,000 Tape width mm Export package measurementsmm 12 395x395x205 Reel size Note For reels of 330mm diameter, please inquire. Refer to P.265 for soldering conditions. 242 SKHU6.2 x 6.3mm (Surface Mount Type) No. Unit:mm Photo PC board land dimensions Viewed from switch mounting face Style TM Switch TACT Dimensions Top push type 2 1 Sharp Feeling 2.6 1 3 5.4 9.5 4 4 Soft Feeling Stem Snap-in Type With ground terminal type 2 2.6 5 3 4 Ground terminal land 3.1 Stem Surface Mount Type 2 1.4 9.5 4 5.4 1 Radial Type Dust-proof type 2 1 2.6 3 3 Stem 5.4 9.5 4 4 Dust-proof and with ground terminal type 5 3 Stem 4 Ground terminal land 5.4 4 2.6 9.5 4 1.4 2 1 3.1 Circuit Diagram Top push type With ground terminal type 1 2 3 4 1 2 3 4 5 243 Surface Mount SKHU SKTD SKSN SKSC SKRT SKRH Features -- Low-profile Mid-mount Low-profile -- 4-direction switch push switch Water-proof -- -- -- -- -- Dust-proof -- -- -- -- -- IP standard -- 67 equivalency -- 67 equivalency -- -- -- -- Top push -- -- -- -- -- -- Side push -- W 6.2 3.9 6.2 5.2 4.5 3.5 4.5 7.35 D 6.3 2.9 3 3.5 2.6 3.55 3.4 7.5 H 2.5/3.1 1.55 3.5 1.55 2.2 1.25 3.3 5 Series SKTG SKSL TM Switch TACT Sharp Feeling Type Type Photo 2N to 3N 3N to 4N 4N to 5N 0.25 0.15 0.2 Ground terminal Operating temperature range -40 to 85 -30 to 85 -40 to 85 Automotive use -- -- 0.15 See the relevant pages for respective product description 0.2 -30 to 85 -- -- -40 to 90 -40 to 85 -- -- 250V AC 1min. 100V AC 1min. -- Radial Type Travelmm Surface Mount Type See the relevant pages for respective product description 1N to 2N Operation force coverage Snap-in Type 1N max. Soft Feeling Dimensions mm Sharp Feeling Operating direction Half-mount Life Cycle Electrical performance Ratingmax. Resistive load 50mA 12V DC Ratingmin. Resistive load 10A 1V DC Insulation resistance 100M min. 100V DC 1min. Voltage proof 250V AC 1min. 250V AC 1min. 100V AC 1min. Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Lifetime Shall be in accordance with individual specifications. Cold -40 96h Durability Environmental performance 100V AC 1min. Dry heat 90 96h 85 96h 90 96h Damp heat Page 85 96h 90 96h 60, 90 to 95%RH 96h 242 244 245 246 247 248 250 465 WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. TACT SwitchTM Soldering Conditions 265 TACT SwitchTM Cautions 266 Notes 1. The automotive operating temperature range to be individually discussed upon request. 2. Indicates applicability to all products in the series, while indicates applicability to some products in the series. 193 TACT SwitchTM Soldering Conditions TM Switch TACT Condition for Reflow Available for Surface Mount Type. 1. Temperature measurement: Thermocouple 0.1 to 0.2 CAKor CCTat solder joints copper foil surface. A heat resistive tape should be used to fix thermocouple. 2. Temperature profile Temperature (C ) 260C max. 3 sec max. Sharp Feeling 230C 180 150 Time Soft Feeling 120 sec max. pre-heating 40s max. 3 to 4min. Time inside soldering equipment Manual Soldering Available for Snap-in Type and Radial Type. Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Items Condition Soldering temperature 350 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. Preheating time 60s max. Soldering temperature 260 max. Duration of immersion 5s max. Items Condition Number of soldering 2times max. Soldering temperature 360 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. SKHH, SKPD Series Radial Type Items Surface Mount Type Conditions for Auto-dip Snap-in Type Notes 1. The above temperature shall be measured of the top of switch. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. SKHH, SKHW, SKRG, SKPD Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 110 max. Items Condition Preheating time 60s max. Soldering temperature 350 max. Soldering temperature 260 max. Duration of soldering 3s max. Duration of immersion 5s max. Capacity of soldering iron 20W max. Number of soldering 2times max. SKTD, SKTG, SKQJ, SKQK, SKEG Series SKQJ, SKQK, SKEG Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Preheating time 45s max. Soldering temperature 255 max. Duration of immersion 5s max. Number of soldering 2times max. Notes 1. Prevent flux penetration from the top side of the TACT SwitchTM. 2. Switch terminals and a PC board should not be coated with flux prior to soldering. 3. The second soldering should be done after the switch is stable with normal temperature. 4. Use the flux with a specific gravity of min 0.81. EC-19S-8 by TAMURA Corporation, or equivalents. 265