Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
PolySwitch®
PTC Devices
Overcurrent Protection Devi ce
PRODUCT: SMD150F
DOCUMENT: SCD 25640
PCN: 888758
REV LETTER: B
REV DATE: MARCH 28, 2005
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Ratings
Operating Voltage / Interrupt Current
15V / 40A
12V / 60A
5V / 125A
Marking:
Notes:
1. All metal surfaces are tin plated.
2. Devices cannot be wave soldered.
3. Drawing not to scale.
F
G
B
C
E
A
H
D
TABLE I. DIMENSIONS:
A B C D E F G H
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN
mm: 8.00 9.40 -- 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
in*: (0.315) (0.370) -- (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS** TIME TO
TRIP** RESISTANCE
VALUES
TRIPPED-STATE
POWER
DISSIPATION**
AMPS
AT 0°C AMPS
AT 20°C AMPS
AT 60°C SECONDS AT
20°C, 8.0A OHMS
AT 20°C WATTS AT
20°C
HOLD TRIP HOLD TRIP HOLD TRIP MAX MIN MAX* MAX
1.80 3.60 1.50 3.00 0.99 1.98 5.0 0.060 0.250 1.9
* Maximum resistance is measured both 1 hour post reflow and 1 hour post trip.
** Values specified were determined using PCB’s with 0.070”X1.5 ounce copper traces.
Agency Recognition: UL, CSA, TÜV
Reference Documents: PS300, E.N. SMD 1.0x
Precedence: This specification takes precedence over documents referenced herein.
Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant ELV Compliant Pb-Free
© 2005 Tyco Electronics Corporation. All rights reserved.
