SURFACE MOUNT, HIGH REPEATABILITY, BROADBAND CENTIGRID (R) RELAYS DPDT SERIES DESIGNATION RELAY TYPE SGRF100 Repeatable, RF Centigrid (R) relay SGRF103 Sensitive, repeatable, RF Centigrid (R) relay UPPER STATIONARY CONTACT UNIFRAME LOWER STATIONARY CONTACT ARMATURE ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Storage -65C to +125C Operating -55C to +85C Vibration (General Note 1) 10 g's to 500 Hz Shock (General Note 1) 30 g's, 6ms half sine Enclosure Hermetically sealed SGRF100 0.09 oz. (2.55g) max. SGRF103 0.16 oz. (4.5g) max. (c) 2007 TELEDYNE RELAYS The ultraminiature SGRF100 and SGRF103 relays are designed to provide a practical surface-mount solution with improved RF signal repeatability over the frequency range. SGRF100 and SGRF103 relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-to-pole isolation. This ground shield provides a ground interface that results in improved highfrequency performance as well as parametric repeatability. The SGRF100 and SGRF103 extend performance advantages over similar RF devices that simply offer formed leads for surface mounting. These relays are engineered for use in RF attenuator, RF switch matrices, ATE and other applications that require dependable high frequency signal fidelity and performance. SHOWN WITHOUT GROUND SHIELD Weight SGRF100 SGRF103 DESCRIPTION INTERNAL CONSTRUCTION Temperature (Ambient) SERIES The SGRF100 and SGRF103 feature: * High repeatability * Broader bandwidth * Metal enclosure for EMI shielding * High isolation between control and signal paths * High resistance to ESD The following unique construction features and manufacturing techniques provide excellent robustness to environmental extremes and overall high reliability: * Uniframe motor design provides high magnetic efficiency and mechanical rigidity * Minimum mass components and welded construction provide maximum resistance to shock and vibration * Advanced cleaning techniques provide maximum assurance of internal cleanliness * Gold-plated precious metal alloy contacts ensure reliable switching * Hermetically sealed (800) 284-7007 * www.teledynerelays.com SGRF100/SGRF103 Page 1 SGRF100SGRF103\052007\Q1 SERIES SGRF100 AND SGRF103 TYPICAL RF CHARACTERISTICS (See RF Notes) Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) -20 -20 -30 Isolation (dB) Isolation (dB) -30 -40 -40 Energized -50 De-energized Normally Closed -50 -60 Normally Open -70 -60 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0 6000 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency (MHz) Frequency (MHz) VSWR (RF Note 6) Insertion Loss (RF Note 6) 0 3.00 2.60 -0.4 -0.6 Normally Closed 2.20 -0.8 VSWR Insertion Loss (dB) -0.2 -1 Normally Closed -1.2 Normally Open 1.80 Normally Open -1.4 1.40 -1.6 -1.8 0 1.00 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0 6000 500 1000 1500 2000 Frequency (MHz) 2500 3000 3500 4000 4500 5000 5500 6000 Frequency (MHz) SGRF100 Time Response (RF Note 6) 1.1 0.9 90% Volt 0.7 37ps reference 0.5 82.8ps propagation delay time 0.3 54.7ps pulse rise time 10% 0.1 -0.1 -100 0 100 200 300 400 500 600 700 800 900 Time (ps) RF NOTES a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid(R) 6002 with SMA connectors. (RT/duroid(R) is a registered trademark of Rogers Corporation.) b. RF ground shield is soldered to PCB RF ground plane. c. Room ambient temperature. d. Terminals not tested were terminated with 50-ohm load. e. Contact signal level: -10 dBm. f. No. of test samples: 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. Data is per pole, except for pole-to-pole data. Data is the average from readings taken on all open contacts. Data is the average from readings taken on poles with coil energized and de-energized. Data is the average from readings taken on all closed contacts. Test fixture effect de-embedded from frequency and time response data. 1. Test conditions: 2. 3. 4. 5. 6. 7. SGRF100/SGRF103 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (c) 2007 TELEDYNE RELAYS SGRF100SGRF103\052007\Q1 SERIES SGRF100 AND SGRF103 GENERAL ELECTRICAL SPECIFICATIONS (@25C unless otherwise noted) (Notes 2 & 3) Contact Arrangement DPDT Rated Duty Continuous Contact Resistance 0.100 7 max. initial Contact Load Rating Low level: 10 to 50 MA @ 10 to 50 mV Contact Life Ratings 10,000,000 cycles (typical) at low level Coil Operating Power SGRF100-5: 500 mW typical @ nominal rated voltage SGRF100-12: 369 mW typical @ nominal rated voltage SGRF103-5: 250 mW typical @ nominal rated voltage SGRF103-12: 180 mW typical @ nominal rated voltage Operate Time SGRF100: 4.0 mS max. SGRF103: 6.0 mS max. Release Time SGRF100: 3.0 mS max. SGRF103: 3.0 mS max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 1,000 M7 min. between mutually isolated terminals Dielectric Strength 350 Vrms (60 Hz) @ atmospheric pressure DETAILED ELECTRICAL SPECIFICATIONS (@25C) BASE PART NUMBERS SGRF100-5/SGRF103-5 SGRF100-12/SGRF103-12 5.0 12.0 SGRF100 50 390 SGRF103 100 800 3.6 9.0 Coil Voltage, Nominal (Vdc) Coil Resistance (Ohms 20%) Pick-up Voltage (Vdc max.) GENERAL NOTES 1. Relays will exhibit no contact chatter in excess of 10 sec or transfer in excess of 1 Msec. 2. Unless otherwise specified, parameters are initial values. 3. Relays may be subjected to 260C, peak solder reflow temperature, 1 minute, 3 passes. 4. Butt-lead ends are coplanar within .003" (0.08). 5. Application notes available for PCB layout and mounting information. 6. Add "/R" to end of part number for RoHS compliant solder coated pins (Sn99.3/Cu0.7). (c) 2007 TELEDYNE RELAYS OUTLINE DIMENSIONS .335 SQ MAX (8.51) SRGF103 .460 MAX (11.68) SRGF100 .355 MAX (9.02) .063 REF (1.6) .375 SQ MAX (9.52) .031 REF (0.79) +.002 (8) LEADS .035 REF (0.89) 7 +.030 4X .397 -.020 .100 0.010 TYP (2.54 0.254) 8 O.017 -.001 BEFORE LASER WELD +0.05 (0.43 -0.025 ) 1 6 2 (10.08 +0.76 -0.51 ) 5 .100 0.010 TYP (2.54 0.254) 4 3 SCHEMATIC - TERMINAL VIEW Pin numbers for reference only; not marked on display NOTES 1. Dimensions are in inches. Metric equivalents shown in parentheses. 2. For best RF performance, solder bottom of RF ground shield to PCB RF ground plane. (800) 284-7007 * www.teledynerelays.com RF GROUND SHIELD (SEE NOTE 2) U.S. PATENT PENDING SGRF100/SGRF103 Page 3 SGRF100SGRF103\052007\Q1 Appendix A: Spacer Pads Pad designation and bottom view dimensions Height O.150 [3.81] (REF) Dim H MAX "M4" Pad for TO-5 For use with the following: ER411T ER412, ER412D, ER412DD 712, 712D, 712TN, RF300, RF310, RF320 ER420, ER422D, ER420DD, 421, ER421D, ER421DD, ER422, ER422D, ER422DD, 722, 722D, RF341 ER431T, ER432T, ER432, ER432D, ER432DD 732, 732D, 732TN, RF303, RF313, RF323 Dim. H Max. .295 (7.49) .300 (7.62) .305 (7.75) .400 (10.16) .410 (10.41) RF312 .350 (8.89) ER411, ER411D, ER411DD .295 (7.49) ER431, ER431D, ER431DD .400 (10.16) RF311 .300 (7.62) RF331 .410 (10.41) 172, 172D .305 (7.75) ER114, ER114D, ER114DD, J114, J114D, J114DD .300 (7.62) ER134, ER134D, ER134DD, J134, J134D, J134DD .400 (10.16) RF100 .315 (8.00) RF103 .420 (10.67) 122C, A152 .320 (8.13) ER116C, J116C .300 (7.62) ER136C, J136C .400 (10.16) RF180 .325 (8.25) A150 .305 (7.75) Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for Centigrid(R) .156 [3.96] (REF) Dim H MAX .256 [6.5] (REF) "M9" Pad for Centigrid(R) Notes: 1. Spacer pad material: Polyester lm. 2. To specify an "M4" or "M9" spacer pad, refer to the mounting variants portion of the part numbering example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specied, tolerance is .010 (.25). 5. Add 10 m to the contact resistance show in the datasheet. 6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. (c) 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Appendix A: Spreader Pads Pad designation and bottom view dimensions Height For use with the following: .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .150 [3.81] .014 [0.36] (REF) .300 [7.62] .100 [2.54] .370 [9.4] MIN .200 [5.08] "M" Pad 5/ 6/ .390 [9.91] SQ .100 [2.54] .100 [2.54] .150 [3.81] .300 [7.62] .150 [3.81] Dim H MAX ER411T, J411T, ER412, ER412D ER412DD, J412, J412D, J412DD ER412T, J412T 712, 712D, 712TN ER431T, J431T, ER432, ER432D ER432DD, J432, J432D, J432DD ER432T, J432T 732, 732D, 732TN .300 [7.62] .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .150 [3.81] .014 [0.36] (REF) .300 [7.62] .100 [2.54] .200 [5.08] .370 [9.4] MIN "M3" Pad 5/ 6/ 9/ .393 (9.99) .493 (12.52) .503 (12.78) .398 (10.11) ER411T ER412, ER412D, ER412DD J412, J412D, J412DD .441 (11.20) 732, 732D "M2" Pad 7/ 8/ .388 (9.86) ER420, J420, ER420D, J420D ER420DD, J420DD, ER421, J421 ER421D, J421D, ER421DD J422D, ER422DD, J422DD, 722 712, 712D ER421, ER421D, ER421DD 722, 732D ER431T ER432, ER432D, ER432DD .130 [3.3] Dim. H Max. ER411, ER411D, ER411DD ER411TX ER412X, ER412DX, ER412DDX ER412TX 712X, 712DX, 712TNX ER420X, ER420DX, ER420DDX ER421X, ER421DX, ER421DDX ER422X, ER422DX ER422DDX, 722X, 722DDX ER431, ER431D, ER431DD ER431TX ER432X, ER432DX, ER432DDX ER432TX 732X, 732DX, 732TNX .451 (11.46) .451 (11.46) .546 (13.87) .556 (14.12) .388 (9.86) .393 (9.99) .398 (10.11) .493 (12.52) .503 (12.78) Notes: 1. Spreader pad material: Diallyl Phthalate. 2. To specify an "M", "M2" or "M3" spreader pad, refer to the mounting variants portion of the part number example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specied, tolerance is .010" (0.25). 5/. Add 25 m to the contact resistance shown in the datasheet. 6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. 7/. Add 50 m to the contact resistance shown in the datasheet. 8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet. 9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.) (800) 284-7007 * www.teledynerelays.com +44 (0) 1236 453124 * www.teledyne-europe.com (c) 2008 Teledyne Relays Appendix A: Ground Pin Positions O.200 [O5.08] 363 "Z" POSITION "X" POSITION "Y" POSITION "Z" O.200 [O5.08] "Y" 453 TO-5 Relays: ER411T, ER412, ER412T, ER420, ER421, ER422, ER431T, ER432, ER432T, 712, 712TN, 400H, 400K, 400V, RF300, RF303, RF341, RF312, RF310, RF313, RF320, RF323 "Y" POSITION POSITION TO-5 Relays: ER411, ER431, RF311, RF331 POSITION .100 [2.54] "W" "Z" .100 [2.54] .050 [1.27] "X" .100 [2.54] POSITION POSITION "Z" POSITION POSITION .100 [2.54] POSITION "U" POSITION (ER116C and ER136C only) Centigrid(R) Relays: RF180, ER116C, 122C, ER136C .100 [2.54] Centigrid(R) Relays: RF100, RF103, ER114, ER134, 172 Indicates ground pin position Indicates glass insulated lead position Indicates ground pin or lead position depending on relay type (c) 2008 Teledyne Relays "Y" .100 [2.54] NOTES 1. Terminal views shown 2. Dimensions are in inches (mm) 3. Tolerances: .010 (.25) unless otherwise specied 4. Ground pin positions are within .015 (0.38) dia. of true position 5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref. 6. Lead dia. 0.017 (0.43) nom. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE