CLD-CT874.012 PRODUCT FAMILY DATA SHEET Cree(R) PLCC4 3 in 1 SMD LED CLV1A-FKB PRODUCT DESCRIPTION FEATURES APPLICATIONS Cree PLCC full-color LEDs offer high- * Size (mm):3.2 x 2.8 * Full-Color Video Screen intensity light output and a wide * Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (460 - 475nm) * Decorative lighting viewing angle in an industry-standard package. Designed to work in a wide array of environmental conditions, Cree PLCC full-color LEDs are suited for indoor video screen, decorative lighting and amusement applications. * Amusement * Luminous Intensity (mcd) Red (505 - 1010) Green (900 - 2240) Blue (224 - 450) * Moisture Sensitivity Level: 5a * Lead-Free WWW.CREE.COM/HB * RoHS Compliant Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 3 in 1 SMD LED CLV1A-FKB ABSOLUTE MAXIMUM RATINGS (TA = 25C) Items Symbol Absolute Maximum Rating Unit R G B IF 50 25 25 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 100 100 mW Operation Temperature Topr -40 ~ +85 C Storage Temperature Tstg -40 ~ +100 C Junction Temperature TJ 110 110 110 C Junction/ambient 1 chip on RTHJA 450 400 450 C/W Junction/ambient 3 chips on RTHJA 650 580 680 C/W Junction/solder point 1 chip on RTHJS 300 280 300 C/W Junction/solder point 3 chips on RTHJS 450 430 480 C/W Forward Current Note 1 Peak Forward Current Note 2 Note: 1.Single-color light. 2.Pulse width 0.1 msec, duty 1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25C) Characteristics Condition Symbol Dominant Wavelength IF = 20 mA DOM Spectral bandwidth at 50% IREL max IF = 20 mA Forward Voltage Luminous Intensity Reverse Current (max) IF = 20 mA IF = 20 mA VR = 5 V Values Unit R G B 619~624 520~535 460~475 nm 24 38 28 nm VF(avg) 2.0 3.2 3.2 V VF(max) 2.6 4.0 4.0 V IV(min) 505 900 224 mcd IV(avg) 710 1450 310 mcd IR 10 10 10 A Note: Continuous reverse voltage can cause LED damage. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB INTENSITY BIN LIMIT (IF = 20 mA) Red Bin Code Min.(mcd) Blue Green Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) 900 1120 F 224 280 de 252 318 km 505 635 N K 560 710 st 1010 1260 np 635 805 P 1120 1400 G 280 355 M 710 900 vw 1260 1600 fg 318 403 qr 805 1010 Q 1400 1800 H 355 450 xy 1600 2020 R 1800 2240 Tolerance of measurement of luminous intensity is 10%. COLOR BIN LIMIT (IF = 20 mA) Red Blue Green Bin Code Min.(nm) Max.(nm) RB 619 624 Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) G7 520 525 B3 460 465 G23 522.5 527.5 B23 462.5 467.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 Tolerance of measurement of dominant wavelength is 1 nm. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color CLV1A-FKB-CkmqrNRFHBB79353 CLV1A-FKB-Ckm1P1F1BB7C3C3 CLV1A-FKB-CK1vw1de1BB7C3C3 Color Bin Max. (nm) Package 619 RB 624 Reel 520 G9 535 Reel 460 B5 475 Reel 619 RB 624 Reel Color Bin Min. (nm) 1010 RB 2240 G7 B3 RB Min. Max. Red 505 Green 900 224 450 Blue Dominant Wavelength (nm) Red Any 1 Intensity bin from km(505) - qr(1010) Green Any 1 Intensity bin from P(1120) - R(2240) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from F(224) - H(450) Any 1 hue bin from B3(460) - B5(475) Reel Red Any 1 Intensity bin from K(560) - qr(1010) Green Any 1 Intensity bin from vw(1260) - R(2240) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from de(252) - H(450) Any 1 hue bin from B3(460) - B5(475) Reel RB 619 RB 624 Reel Notes: 1.The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from P - R means only 1 intensity bin (P or vw or Q or xy or R) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only 1 color bin (G7 or G23 or G8 or G45 or G9)will be shipped by Cree. 2.Please refer to the "Cree LED Lamp Reliability Test Standards" document #1 for reliability test conditions. 3.Please refer to the "Cree LED Lamp Soldering & Handling" document #2 for information about how to use this LED product safely. #1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf #2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of RoHS-restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application in accordance with EU Directive 2011/65/EC (RoHS2), as implemented by EU member states on January 2, 2013 and amended on March 31, 2015 by EU Directive 2015/863/EU. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB REFLOW SOLDERING * * * The CLV1A-FKB is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO. : 13 Temperature Melting-point Pre-heat Soak Cooling Time Use only CLV1A-FKB Use with all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Reflow Solder = Lead-free Solder Average ramp-up rate = 4C/s max Average ramp-up rate =4C/s max. Average ramp-up rate =4C/s max Preheat temperature = 150C ~200C Preheat temperature = 100C ~150C Preheat temperature = 150C ~200C Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6C/s max. Ramp-down rate = 6C/s max. Preheat time = 120s max Ramp-down rate = 6C/s max Peak temperature = 250C max = 230C max. = 10s max Time Peak within temperature 5C of actual Peak Temperature Peak temperature = 250C max. Time within 5Cisof actual Duration above 217C 60s max Time within 5C of actual Peak Temperature = 10s max. Peak Temperature = 10s max. Duration above 183C is 80s max. Only use LP6-NPP1-01-N1 Duration above 217C is 80s max. [13] Solder = Low Lead-free Average ramp-up rate = 3C/s max. Preheat temperature = 130C ~170C Preheat time = 120s max. Ramp-down rate = 6C/s max. Peak temperature = 213C max. Time within 3C of actual Peak Temperature = 25s max. Duration above 200C is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details. 7.0 Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 9 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB Document No.: CREE-05-005 Rev. NO. : 16 NOTES * pickupSMDproductsduringtheprocessofSMTproduction.Ifhandlingisnecessary,itshouldtake careful to pick up these : The packaging sizes of these SMD products areproducts.Thefollowingtwomethodsarenecessary very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products. * To avoid damaging the product's surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method necessary: Fig.1a:isFor Small Top SMD Fig.1b: For Mini side 0.8mm SMD ForSmallTopSMDseries,itisrecommendedtouserubbermaterialNozzletopickupSMDproducts figuresize for reference : a.) Circular Nozzle: inner diameter: O1.8mm+/-0.05mm, outer diameter: O2.3mm+/-0.05mm. b.)Rectangle Nozzle: innersize:1.3mm x 2.3mm,outer size > SMDsize. 6. Electrostatic Discharge and Surge current Electrostaticdischarge (ESD) orsurgecurrent(EOS) maydamageSMD LED. PrecautionssuchasESDwriststrap,ESDshoestraporantistaticglovesmustbewornwheneverhandlingofS Alldevices,equipmentandmachinerymustbeproperlygrounded. Itisrecommendedto perform electrical test to screen out ESD failures at final inspection. Itisimportanttoeliminatethepossibilityofsurgecurrentduringcircuitrydesign 7. Heat Management HeatmanagementofSMD LEDmustbetakenintoconsiderationduringthedesignstageof SMD LED applicatio current should be de-ratedappropriatelybyreferringtothede-ratingcurveattachedoneachproductspecification. Dataissubjecttochangewithoutpriornotice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10 Cree PLCC4 3 in 1 SMD LED CLV1A-FKB PACKAGING * * * * * * The CLV1A-FKB is rated as a MSL 5a product. The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. H UMIC HECK w ww .vit ap ac .c om Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright (c) 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 11