RMS load current : I (A) Ambient temperature : Tamb (°C)
0 5 10 15 20 25 30 35
0
550 55 600
0
10
20
30
40
50
60
70
80
90
100
0
120
01020 3040
0 60 70 80 90 100 1100
T case
max (°C)
70
80
100
2,2K/W
1,1K/W
0,3K/W
,75K/W
0,55K/W
1,6K/W
6K/W
Pd ( watts)
75
85
Full on state
50% on stat
,95K/W
S/MON/SC945160/A/02/02/2000
Caractéristiques de sortie(à 20°C) / Output characteristics (at 20
°
C)
Paramètre / Parameter Conditions Symbol Typ. Unit
Tension de charge / Load voltage Ue 230 V rms
Plage tension de fonctionnement / Operating range Uemin-max 12-280 V rms
Tension crête / Peak voltage Up 600 V
Niveau de synchonisation / Synchronizing level Usync 12 V
Tension d'amorçage / Latching voltage Ie nom Ua 8 V
Courant nominal AC-51/ AC-51 nominal current ( see Fig. 2 ) Ie AC-51 50 A rms
Courant nominal AC-53/ AC-53 nominal current *
Courant de surcharge non répétitif /Non repetitive overload current tp=10ms (Fig. 3) Itsm 550 A
Chute tension directe crête/ On state voltage drop @ Ie nom Vd 1,45 V
Courant de fuite état bloqué/ Off state leakage current @Ue, 50Hz Ilk <3 mA
Courant de charge minimum / Minimum load current Ie min 5 mA
Temps de fermeture/ Turn on time Uc nom DC ,f=50Hz ton max 10 ms
Temps d'ouverture/ Turn off time Uc nom DC ,f=50Hz toff max 10 ms
Plage de fréquence / Operating frequency range f 0,1-440 Hz
dv/dt état bloqué / Off state dv/dt dv/dt 500 V/µs
dI/dt maximum non répétitif/ Maximum di/dt non repetitive di/dt 50 A/µs
I2t (<10ms) I2t 1500 A2s
EMC Test d'immunité conduite / Conducted immunity level IEC 1000-4-4 (burst) 2kV criterion A
EMC Test d'immunité conduite / Conducted immunity level IEC 1000-4-5(schocks) 2kV crit.A with external VDR
Conformité / Conformity EN60947-4-x
11010,10,01
0
200
400
600
0
t (s)
Itsm (Apeak)
Surcharge de courant : Itsm (Apeak) = f(t) pour modéle 50A(Itsm=550A)
Sur
e current : Itsm
A
eak
=
t
or 50A models with Itsm =550A
Surcharge de courant non répétitive sans tension réappliquée /
No repetive surge current without voltage reapplied.
Surcharge de courant répétitive avec tension réappliqué
Repetive surge current with voltage reapplied.
Fig.3
1 -Itsm non répétitif sans tension réappliquée est
donné pour la détermination des protections.
No repetitive Itsm is given without voltage
reapplied for the determination of the protection.
2 -Itsm répétitif est donné pour des surcharges de
courant (Tj initiale=70°C). La répétition de ces
surcharges de courant diminue la durée de vie du
Relais.
Repetitive Itsm is given for inrush current with
initial Tj = 70
°
C. The repetition of the surge cur-
rent decrease the lifetime SSR's .
r e l a i s
Rue Ampère B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com
Fax +33 (0) 4 77 53 85 51 Service Commercial France Tél. : +33 (0) 4 77 53 90 20
Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19
www.celduc.com
celduc
Précautions :
* Les relais à semiconducteurs ne procurent pas d'isolation gal-
vanique entre le réseau et la charge.
Cautions :
* Semiconductor relays don't provide any galvanic insulation
between the load and the mains.
page 2 / 2 F/GB
Fig. 2 Courbes thermiques / Thermal characteristics * For other loads
consult celduc
Pour autres charges
consulter celduc