TEMPERATURE SENSITIVE METAL FILM RESISTORS
TC’S FROM +150 TO +7000 PPM
Linear positive temperature coefficients:
LP & MLP temperature sensitive resistors feature linear positive
T.C.’s in a wide range of R/T slopes. The series was developed as
a low cost substitute for wirewound sensors. Various temperature
coefficients are obtained by adjusting the film composition. LPT
features platinum film for i mp rov ed linearity, interchangeability and
+300°C operating temp. Small sizes result in fast response
times, typically 6 seconds for LP/MLP12 & LPT, 9 seconds for
LP/MLP25 (in still air).
Economically priced PTC sensors
Wide resistance range: 1.5 - 100K
High stability, excellent linearity
Standard tolerance: ±5% (1%1, 2%, 10% available)
Marked with color bands or alpha-numeric
Resistance value is measured at 25°C (0°C available)
Flat chip available, refer to FLP series
FEATURES
MLP SERIES +155°C MELF
LP SERIES +155°C AXIAL
LPT SERIES +300°C AXIAL
PERFORMANCE
ST ANDARD TEMPERATURE COEFFICIENTS
(Boldfaced items indicate most popular TC’s)
1 1% tol avail in limited resis.range
2 LPT resis. may also be specified at 0°C (e.g. “101@0”, “1001@0”)
* T.C. measured at 25°C and 65°C.
** 7000 ppm parts are marked alphanumerically. Operating temp. range is
-65 to +125°C, resis. tol. is 5% or 10%, hermetically sealed silicon
*RCT )C°/mpp( *RCT ecnareloT egnaRecnatsiseRdradnatS
21PLM&21PL52PLM&52PL
051C°/mpp05±15K15- 001 K001-
05215K15- 001 K001-
05315K15- 001 K001-
05415K15- 001 K001-
05515K15- 001 K001-
056%01±15K34- 001 K28-
05715K34- 001 K28-
05815K34- 001 K28-
05915K34- 001 K28-
000115K72- 001 K15-
002115K72- 001 K15-
004115K72- 001 K15-
006115K01- 001 K72-
008115K01- 001 K72-
000215K1.9- 001 K22-
002215K1.9- 001 K22-
0052 %5± 15 K1.9- 001 K22-
000301K1.5- 02 K01-
003301K1.5- 02 K01-
006301K1.5- 5.1 K01-
0004 01 K3.3- 5.1 K01-
0054 01 086- 01 K01-
0005 01 086- 01 K01-
**0007%01±01K01-
21PLM&21PL52PLM&52PLTPL
)C°56-52(CT ~051+ /mpp0005+C°~051+ /mpp0005+C°/mpp0053+C°
egnaR.siseRK15otmho01K001otmho5.1mho005ot01
C°52@egattaWW8/1W4/1W61/1
gnitaRegatloVV051V052V051
.pmeTgnitarepOC°551+otC°55-C°551+otC°55-C°003+otC°55-
C°52>gnitareD)V&W(C°/%77.)V&W(C°/%77.)V&W(C°/%463.
.ssiDlamrehTC°/Wm5.2C°/Wm5.4C°/Wm2
efiLdaoLrh-0001.xaM%0.1.xaM%0.1.xaM%5.0
efiLflehSraeY1.xaM%3.0.xaM%3.0.xaM%2.0
.pmeThgiH erusopxE retfa%1± C°521@srh0001 retfa%1± C°521@srh0001 retfa%5.0± C°051@srh0001
ytiraeniL C°001~0%5.0± C°051~05-%5.1± C°001~0%5.0± C°051~05-%5.1± C°001~0%2.0± C°051~05-%5.0± C°003~05-%5.1±
FA089A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
EPYT]52.[10.±L]2.[800.±D).niM(W).xaM(t
21PLM]4.3[531.]54.1[750.]3.[210.]51.[600.
52PLM]7.5[522.]51.2[580.]5.[020.]2.[800.
tInch [mm]
L
W
D
EPYT]8.[130.±L]5.[20.±D]80.[300.±d.niMH
21PL]65.3[041.]6.1[460.]5.[020.]4.52[00.1
52PL]68.6[072.]3.2[090.]6.[420.]03[81.1
TPL]4[751.]6.1[460.]64.[810.]4.52[00.1
RCD C omponents Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
RESISTORSCAPACITORSCOILSDELAY LINES
84
dInch [mm]
D
L
H
P/N DESIGNA TION: LP25 - 101 - J T 151 W
RCD T ype (LP12, MLP12, LP25, MLP25,LPT)
Packaging: B = Bulk, T = Tape & Reel
Tolerance: F=1%, G= 2%, J= 5% (std), K=10%
TC: Use 3-digit code (151=150ppm, 102=1000ppm, 452=4500ppm)
Resis.@25°C2: If
2% tol. use 2 signif.figures &multiplier,
(1R0=1, 100=10Ω, 101=100Ω, 102=1K, 103=10K, etc.);
If
1% tol. use 3 signif. digits & multiplier (1R00=1Ω,
10R0=10Ω, 1000=100Ω, 1001=1K, 1002=10K, 1003=100K)
Termination: W=Pb-free, Q=SnPb (leave blank if either is acceptable)
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible