TEMPERATURE SENSITIVE METAL FILM RESISTORS TC'S FROM +150 TO +7000 PPM MLP SERIES +155C MELF LP SERIES +155C AXIAL LPT SERIES +300C AXIAL FEATURES RoHS Economically priced PTC sensors Wide resistance range: 1.5 - 100K High stability, excellent linearity Standard tolerance: 5% (1%1, 2%, 10% available) Marked with color bands or alpha-numeric Resistance value is measured at 25C (0C available) Flat chip available, refer to FLP series RESISTORSCAPACITORSCOILSDELAY LINES Linear positive temperature coefficients: Term.W is RoHS compliant & 260C compatible LP & MLP temperature sensitive resistors feature linear positive T.C.'s in a wide range of R/T slopes. The series was developed as a low cost substitute for wirewound sensors. Various temperature coefficients are obtained by adjusting the film composition. LPT features platinum film for improved linearity, interchangeability and +300C operating temp. Small sizes result in fast response times, typically 6 seconds for LP/MLP12 & LPT, 9 seconds for LP/MLP25 (in still air). L H d D Inch [mm] STANDARD TEMPERATURE COEFFICIENTS (Boldfaced items indicate most popular TC's) TC R * TC R * (ppm/C) Tolerance Standard Resistance Range LP12 & MLP12 LP25 & MLP25 51 - 51K 100 - 100K 250 51 - 51K 100 - 100K 350 51 - 51K 100 - 100K 450 51 - 51K 100 - 100K 550 51 - 51K 100 - 100K 51 - 43K 100 - 82K 150 650 50 ppm/C 10% 750 51 - 43K 100 - 82K 850 51 - 43K 100 - 82K 950 51 - 43K 100 - 82K 1000 51 - 27K 100 - 51K 1200 51 - 27K 100 - 51K 1400 51 - 27K 100 - 51K 1600 51 - 10K 100 - 27K 1800 51 - 10K 100 - 27K 2000 51 - 9.1K 100 - 22K 51 - 9.1K 100 - 22K 51 - 9.1K 100 - 22K 3000 10 - 5.1K 20 - 10K 3300 10 - 5.1K 20 - 10K 3600 10 - 5.1K 1.5 - 10K 4000 10 - 3.3K 1.5 - 10K 4500 10 - 680 10 - 10K 5000 10 - 680 10 - 10K 2200 2500 7000** 5% 10% 10 - 10K 1% tol avail in limited resis.range 2 LPT resis. may also be specified at 0C (e.g. "101@0", "1001@0") * T.C. measured at 25C and 65C. ** 7000 ppm parts are marked alphanumerically. Operating temp. range is -65 to +125C, resis. tol. is 5% or 10%, hermetically sealed silicon TYPE LP 12 LP 25 LP T L .031 [.8] .140 [3.56] .270 [6.86] .157 [4] D .02 [.5] .064 [1.6] .090 [2.3] .064 [1.6] L D d .003 [.08] .020 [.5] .024 [.6] .018 [.46] H Min. 1.00 [25.4] 1.18 [30] 1.00 [25.4] Inch [mm] W TYPE MLP12 MLP25 L.01 [.25] .135 [3.4] .225 [5.7] t D.008 [.2] .057 [1.45] .085 [2.15] W (Min.) .012 [.3] .020 [.5] t (Max.) .006 [.15] .008 [.2] PERFORMANCE LP12 & MLP12 +150~ +5000ppm/C 10 ohm to 51K 1/8W 150V -55C to +155C .77%/C (W&V) 2.5 mW/C 1.0% Max. 0.3% Max. 1% after 1000hrs@125C LP25 & MLP25 LP T +150~ TC (25 - 65C) +3500ppm/C +5000ppm/C Resis. Range 1.5 ohm to 100K 10 to 500 ohm Wattage @25C 1/4W 1/16W Voltage Rating 250V 150V Operating Temp. -55C to +155C -55C to +300C Derating >25C .77%/C (W&V) .364%/C (W&V) Thermal Diss. 4.5mW/C 2mW/C 1000-hr Load Life 1.0% Max. 0.5% Max. 1 Year Shelf Life 0.3% Max. 0.2% Max. High Temp. 1% after 0.5% after Exposure 1000hrs@125C 1000hrs@150C 0.5% 0~100C 0.5% 0~100C 0.2% 0~100C Linearity 0.5% -50~150C 1.5% -50~150C 1.5% -50~150C 1.5% -50~300C P/N DESIGNATION: LP25 - 101 - J T 151 W RCD Type (LP12, MLP12, LP25, MLP25,LPT) Resis.@25C 2 : If 2% tol. use 2 signif.figures &multiplier, (1R0=1, 100=10, 101=100, 102=1K, 103=10K, etc.); If 1% tol. use 3 signif. digits & multiplier (1R00=1, 10R0=10, 1000=100, 1001=1K, 1002=10K, 1003=100K) Tolerance: F=1%, G= 2%, J= 5% (std), K=10% Packaging: B = Bulk, T = Tape & Reel 1 TC: Use 3-digit code (151=150ppm, 102=1000ppm, 452=4500ppm) Termination: W=Pb-free, Q=SnPb (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA089A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 84