Bosch Sensortec BMI088 Shuttle Board GENERAL DESCRIPTION The Bosch Sensortec BMI088 shuttle board is a PCB with the BMI088 Inertial Measurement Unit (IMU) mounted on it. It allows easy access to the sensor's pins via a simple socket. As all Bosch Sensortec sensor shuttle boards have identical footprint, they can be plugged into Bosch Sensortec's advanced development tools (e.g. the Development Board or Application Board). Note: Product photo may differ from real product's appearance. Pin 1 Shuttle board outline dimensions (all dimensions in mm) Bosch Sensortec | BMI088 2|3 BMI088 shuttle board schematic NOTES The COD_GND and COD_PULL pins are pins connected to VDD or GND and are used to identify the shuttle board on the Application Board if used together with the DevelopmentDesktop2.0 evaluation software (SID = shuttle board ID). The naming of the signals differs slightly from the datasheet: for some signals, `_A' or `_G' was added to help the user to assign the signals to the accelerometer or gyro more easily. DELIVERABLES BMI088 shuttle board Headquarters Bosch Sensortec GmbH Gerhard-Kindler-Strasse 9 72770 Reutlingen * Germany Telephone +49 7121 3535 900 Fax +49 7121 3535 909 www.bosch-sensortec.com Data & Specification are preliminary and subject to change without notice | | Bosch Sensortec GmbH reserves all rights in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. BOSCH and the symbols are registered trademarks of Robert Bosch GmbH, Germany. Doc.-Number: BST-DHW-FL025-01 / Version_1.0_201712