GENERAL DESCRIPTION
The Bosch Sensortec BMI088 shuttle board is a PCB with the
BMI088 Inertial Measurement Unit (IMU) mounted on it.
It allows easy access to the sensor’s pins via a simple socket.
As all Bosch Sensortec sensor shuttle boards have identical
footprint, they can be plugged into Bosch Sensortec’s advanced
development tools (e.g. the Development Board or Application
Board).
Bosch Sensortec
BMI088
Shuttle Board
Note: Product photo may differ from real product’s appearance.
Shuttle board outline dimensions (all dimensions in mm)
Pin 1
Bosch Sensortec | BMI088
Data & Specification are preliminary and subject to change without notice | | Bosch Sensortec GmbH reserves all
rights in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third
parties. BOSCH and the symbols are registered trademarks of Robert Bosch GmbH, Germany.
2 | 3
NOTES
The COD_GND and COD_PULL pins are pins connected to
VDD or GND and are used to identify the shuttle board on the
Application Board if used together with the
DevelopmentDesktop2.0 evaluation software (SID = shuttle
board ID).
The naming of the signals differs slightly from the datasheet:
for some signals, ‘_A’ or ‘_G’ was added to help the user to
assign the signals to the accelerometer or gyro more easily.
DELIVERABLES
BMI088 shuttle board
Headquarters
Bosch Sensortec GmbH
Gerhard-Kindler-Strasse 9
72770 Reutlingen · Germany
Telephone +49 7121 3535 900
Fax +49 7121 3535 909
www.bosch-sensortec.com
BMI088 shuttle board schematic