Cree(R) XLamp(R) XT-E LEDs Product Description FEATURES XLamp(R) XT-E LED is Cree's highest performing silicon carbide- * Available in white, 80-CRI min white, 70-CRI min white and based LED technology, delivered in Cree's industry-standard CLD-DS41 Rev 13D Product family data sheet royal blue XP/XT packaging. XT-E White sets the new standard for high * Warm white available in 85- and 90-CRI min. performance and dramatically lowers system cost. XT-E royal * New: available in 2200 K CCT blue is Cree's highest performing source of royal blue light for * Binned at 85C remotephosphor applications. * Cool white efficacy of up to 148lm/W (@85C, 350mA) * Royal blue wall plug efficiency of up to 53% (@85C, 350mA) Cree XLamp LEDs bring high performance and quality of * Wide viewing angle: 115-140 light to a wide range of lighting applications, including * Thermal resistance: 5C/W remotephosphor, * Maximum drive current: 1.5A colorchanging, portable and personal, outdoor, indoordirectional, transportation, stage and studio, * Electrically neutral thermal path commercial and emergencyvehicle lighting. * Vf binning supported for XT-E white and royal blue * XT-E royal blue sorted into 2.5nm wavelength bins * Unlimited floor life at 30C/85% RH * Reflow solderable - JEDEC JSTD020C compatible * RoHS- and REAChcompliant www.cree.com/Xlamp * UL(R) recognized component (E349212) NOTE: For remote phosphor applications, a separate license to certain Cree patents is required. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp (R) XT-E LED Table of contents Characteristics........................................................................................................................................................................................................ 3 Flux Characteristics - White.................................................................................................................................................................................... 4 Flux Characteristics - Royal Blue.......................................................................................................................................................................... 14 Relative Spectral Power Distribution - White....................................................................................................................................................... 15 Relative Spectral Power Distribution - Royal Blue............................................................................................................................................... 15 Relative Luminous Flux vs. Junction Temperature - White................................................................................................................................ 16 Relative Radiant Flux vs. Junction Temperature - Royal Blue............................................................................................................................ 16 Electrical Characteristics...................................................................................................................................................................................... 17 Relative Luminous Flux vs. Current - White......................................................................................................................................................... 18 Relative Radiant Flux vs. Current - Royal Blue..................................................................................................................................................... 18 Relative Chromaticity vs. Current and Temperature........................................................................................................................................... 19 Typical Spatial Distribution - White...................................................................................................................................................................... 20 Typical Spatial Distribution - Royal Blue.............................................................................................................................................................. 20 Thermal Design..................................................................................................................................................................................................... 21 Performance Groups - Luminous Flux............................................................................................................................................................... 21 Performance Groups - Radiant Flux................................................................................................................................................................... 22 Performance Groups - Dominant Wavelength................................................................................................................................................... 22 Performance Groups - Forward Voltage............................................................................................................................................................ 22 Performance Groups - Chromaticity................................................................................................................................................................... 23 Cree's Standard White Chromaticity Regions Plotted on the CIE 1931 Curve.................................................................................................. 27 Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 28 Cree's Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions.................................................................................................... 29 Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 30 Cree's 2200K CCT White Kit Plotted on ANSI Standard Chromaticity Regions................................................................................................ 31 Cree's Standard Chromaticity Kits....................................................................................................................................................................... 31 Bin and Order Code Formats................................................................................................................................................................................ 32 Reflow Soldering Characteristics......................................................................................................................................................................... 33 Notes..................................................................................................................................................................................................................... 34 Mechanical Dimensions....................................................................................................................................................................................... 36 Tape and Reel........................................................................................................................................................................................................ 37 Packaging.............................................................................................................................................................................................................. 38 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) XT-E LED Characteristics Characteristics Unit Thermal resistance, junction to solder point C/W 5 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue degrees 140 Temperature coefficient of voltage mV/C -2.5 ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 mA 1500 Reverse voltage V 5 Forward voltage (@ 350mA, 85C) V LED junction temperature C DC forward current 2.85 3.4 150 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) The following tables provide base order codes for XLamp XT-E White LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 31). Chromaticity Kit 51 53 CCT 6200K 6000K Minimum Luminous Flux (lm) @ 350mA Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum S3 156 177 XTEAWT-00-0000000000K51 XTEAWT-00-000000000BK51 S2 148 168 XTEAWT-00-0000000000J51 XTEAWT-00-000000000BJ51 R5 139 158 XTEAWT-00-0000000000H51 XTEAWT-00-000000000BH51 XTEAWT-00-000000000HH51 R4 130 148 XTEAWT-00-0000000000G51 XTEAWT-00-000000000BG51 XTEAWT-00-000000000HG51 R3 122 140 XTEAWT-00-0000000000F51 XTEAWT-00-000000000BF51 XTEAWT-00-000000000HF51 R2 114 130 XTEAWT-00-0000000000E51 XTEAWT-00-000000000BE51 XTEAWT-00-000000000HE51 Q5 107 122 S3 156 177 XTEAWT-00-0000000000K53 XTEAWT-00-000000000BK53 S2 148 168 XTEAWT-00-0000000000J53 XTEAWT-00-000000000BJ53 R5 139 158 XTEAWT-00-0000000000H53 XTEAWT-00-000000000BH53 XTEAWT-00-000000000HH53 R4 130 148 XTEAWT-00-0000000000G53 XTEAWT-00-000000000BG53 XTEAWT-00-000000000HG53 R3 122 140 XTEAWT-00-0000000000F53 XTEAWT-00-000000000BF53 XTEAWT-00-000000000HF53 R2 114 130 XTEAWT-00-0000000000E53 XTEAWT-00-000000000BE53 XTEAWT-00-000000000HE53 Q5 107 122 75 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000HD51 XTEAWT-00-000000000HD53 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Kit 50 E1 E2 CCT 6200K 6500K 5700K Minimum Luminous Flux (lm) @ 350mA Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum S3 156 177 XTEAWT-00-0000000000K50 XTEAWT-00-000000000BK50 S2 148 168 XTEAWT-00-0000000000J50 XTEAWT-00-000000000BJ50 R5 139 158 XTEAWT-00-0000000000H50 XTEAWT-00-000000000BH50 XTEAWT-00-000000000HH50 R4 130 148 XTEAWT-00-0000000000G50 XTEAWT-00-000000000BG50 XTEAWT-00-000000000HG50 R3 122 140 XTEAWT-00-0000000000F50 XTEAWT-00-000000000BF50 XTEAWT-00-000000000HF50 R2 114 130 XTEAWT-00-0000000000E50 XTEAWT-00-000000000BE50 XTEAWT-00-000000000HE50 Q5 107 122 S3 156 177 XTEAWT-00-0000000000KE1 XTEAWT-00-000000000BKE1 S2 148 168 XTEAWT-00-0000000000JE1 XTEAWT-00-000000000BJE1 R5 139 158 XTEAWT-00-0000000000HE1 XTEAWT-00-000000000BHE1 XTEAWT-00-000000000HHE1 R4 130 148 XTEAWT-00-0000000000GE1 XTEAWT-00-000000000BGE1 XTEAWT-00-000000000HGE1 R3 122 140 XTEAWT-00-0000000000FE1 XTEAWT-00-000000000BFE1 XTEAWT-00-000000000HFE1 R2 114 130 XTEAWT-00-0000000000EE1 XTEAWT-00-000000000BEE1 XTEAWT-00-000000000HEE1 Q5 107 122 S3 156 177 XTEAWT-00-0000000000KE2 XTEAWT-00-000000000BKE2 S2 148 168 XTEAWT-00-0000000000JE2 XTEAWT-00-000000000BJE2 R5 139 158 XTEAWT-00-0000000000HE2 XTEAWT-00-000000000BHE2 XTEAWT-00-000000000HHE2 R4 130 148 XTEAWT-00-0000000000GE2 XTEAWT-00-000000000BGE2 XTEAWT-00-000000000HGE2 R3 122 140 XTEAWT-00-0000000000FE2 XTEAWT-00-000000000BFE2 XTEAWT-00-000000000HFE2 R2 114 130 XTEAWT-00-0000000000EE2 XTEAWT-00-000000000BEE2 XTEAWT-00-000000000HEE2 Q5 107 122 75 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000HD50 XTEAWT-00-000000000HDE1 XTEAWT-00-000000000HDE2 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Kit E3 C1 CCT Minimum Luminous Flux (lm) @ 350mA Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum S3 156 177 XTEAWT-00-0000000000KE3 XTEAWT-00-000000000BKE3 S2 148 168 XTEAWT-00-0000000000JE3 XTEAWT-00-000000000BJE3 XTEAWT-00-000000000LJE3 R5 139 158 XTEAWT-00-0000000000HE3 XTEAWT-00-000000000BHE3 XTEAWT-00-000000000LHE3 XTEAWT-00-000000000HHE3 R4 130 148 XTEAWT-00-0000000000GE3 XTEAWT-00-000000000BGE3 XTEAWT-00-000000000LGE3 XTEAWT-00-000000000HGE3 R3 122 140 XTEAWT-00-0000000000FE3 XTEAWT-00-000000000BFE3 XTEAWT-00-000000000LFE3 XTEAWT-00-000000000HFE3 R2 114 130 XTEAWT-00-0000000000EE3 XTEAWT-00-000000000BEE3 XTEAWT-00-000000000LEE3 XTEAWT-00-000000000HEE3 Q5 107 122 Q4 100 Q3 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000PDE3 XTEAWT-00-000000000UDE3 114 XTEAWT-00-000000000PCE3 XTEAWT-00-000000000UCE3 93.9 107 XTEAWT-00-000000000PBE3 XTEAWT-00-000000000UBE3 Q2 87.4 99.2 XTEAWT-00-000000000PAE3 XTEAWT-00-000000000UAE3 S3 156 177 XTEAWT-00-0000000000KC1 XTEAWT-00-000000000BKC1 S2 148 168 XTEAWT-00-0000000000JC1 XTEAWT-00-000000000BJC1 XTEAWT-00-000000000LJC1 R5 139 158 XTEAWT-00-0000000000HC1 XTEAWT-00-000000000BHC1 XTEAWT-00-000000000LHC1 R4 130 148 XTEAWT-00-0000000000GC1 XTEAWT-00-000000000BGC1 XTEAWT-00-000000000LGC1 R3 122 140 XTEAWT-00-0000000000FC1 XTEAWT-00-000000000BFC1 XTEAWT-00-000000000LFC1 R2 114 130 XTEAWT-00-0000000000EC1 XTEAWT-00-000000000BEC1 XTEAWT-00-000000000LEC1 5000K 5000K 75 CRI Typical 80 CRI Minimum XTEAWT-00-000000000HDE3 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Kit F4 D1 CCT Minimum Luminous Flux (lm) @ 350mA Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum S3 156 177 XTEAWT-00-0000000000KF4 XTEAWT-00-000000000BKF4 S2 148 168 XTEAWT-00-0000000000JF4 XTEAWT-00-000000000BJF4 XTEAWT-00-000000000LJF4 R5 139 158 XTEAWT-00-0000000000HF4 XTEAWT-00-000000000BHF4 XTEAWT-00-000000000LHF4 XTEAWT-00-000000000HHF4 R4 130 148 XTEAWT-00-0000000000GF4 XTEAWT-00-000000000BGF4 XTEAWT-00-000000000LGF4 XTEAWT-00-000000000HGF4 R3 122 140 XTEAWT-00-0000000000FF4 XTEAWT-00-000000000BFF4 XTEAWT-00-000000000LFF4 XTEAWT-00-000000000HFF4 R2 114 130 XTEAWT-00-0000000000EF4 XTEAWT-00-000000000BEF4 XTEAWT-00-000000000LEF4 XTEAWT-00-000000000HEF4 Q5 107 122 XTEAWT-00-000000000LDF4 XTEAWT-00-000000000HDF4 Q4 100 Q3 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000PDF4 XTEAWT-00-000000000UDF4 114 XTEAWT-00-000000000PCF4 XTEAWT-00-000000000UCF4 93.9 107 XTEAWT-00-000000000PBF4 XTEAWT-00-000000000UBF4 Q2 87.4 99.2 XTEAWT-00-000000000PAF4 XTEAWT-00-000000000UAF4 S3 156 177 XTEAWT-00-0000000000KD1 XTEAWT-00-000000000BKD1 S2 148 168 XTEAWT-00-0000000000JD1 XTEAWT-00-000000000BJD1 XTEAWT-00-000000000LJD1 R5 139 158 XTEAWT-00-0000000000HD1 XTEAWT-00-000000000BHD1 XTEAWT-00-000000000LHD1 R4 130 148 XTEAWT-00-0000000000GD1 XTEAWT-00-000000000BGD1 XTEAWT-00-000000000LGD1 R3 122 140 XTEAWT-00-0000000000FD1 XTEAWT-00-000000000BFD1 XTEAWT-00-000000000LFD1 R2 114 130 XTEAWT-00-0000000000ED1 XTEAWT-00-000000000BED1 XTEAWT-00-000000000LED1 4750K 4750K 75 CRI Typical 80 CRI Minimum Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Kit E4 D2 CCT Minimum Luminous Flux (lm) @ 350mA Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum S3 156 177 XTEAWT-00-0000000000KE4 XTEAWT-00-000000000BKE4 S2 148 168 XTEAWT-00-0000000000JE4 XTEAWT-00-000000000BJE4 XTEAWT-00-000000000LJE4 R5 139 158 XTEAWT-00-0000000000HE4 XTEAWT-00-000000000BHE4 XTEAWT-00-000000000LHE4 XTEAWT-00-000000000HHE4 R4 130 148 XTEAWT-00-0000000000GE4 XTEAWT-00-000000000BGE4 XTEAWT-00-000000000LGE4 XTEAWT-00-000000000HGE4 R3 122 140 XTEAWT-00-0000000000FE4 XTEAWT-00-000000000BFE4 XTEAWT-00-000000000LFE4 XTEAWT-00-000000000HFE4 R2 114 130 XTEAWT-00-0000000000EE4 XTEAWT-00-000000000BEE4 XTEAWT-00-000000000LEE4 XTEAWT-00-000000000HEE4 Q5 107 122 XTEAWT-00-000000000LDE4 XTEAWT-00-000000000HDE4 Q4 100 Q3 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000PDE4 XTEAWT-00-000000000UDE4 114 XTEAWT-00-000000000PCE4 XTEAWT-00-000000000UCE4 93.9 107 XTEAWT-00-000000000PBE4 XTEAWT-00-000000000UBE4 Q2 87.4 99.2 XTEAWT-00-000000000PAE4 XTEAWT-00-000000000UAE4 S3 156 177 XTEAWT-00-0000000000KD2 XTEAWT-00-000000000BKD2 S2 148 168 XTEAWT-00-0000000000JD2 XTEAWT-00-000000000BJD2 R5 139 158 XTEAWT-00-0000000000HD2 XTEAWT-00-000000000BHD2 XTEAWT-00-000000000LHD2 R4 130 148 XTEAWT-00-0000000000GD2 XTEAWT-00-000000000BGD2 XTEAWT-00-000000000LGD2 R3 122 140 XTEAWT-00-0000000000FD2 XTEAWT-00-000000000BFD2 XTEAWT-00-000000000LFD2 R2 114 130 XTEAWT-00-0000000000ED2 XTEAWT-00-000000000BED2 XTEAWT-00-000000000LED2 Q5 107 122 4500K 4500K Order Codes 75 CRI Typical 80 CRI Minimum XTEAWT-00-000000000LDD2 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Kit C2 C3 CCT Minimum Luminous Flux (lm) @ 350mA Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum S3 156 177 XTEAWT-00-0000000000KC2 XTEAWT-00-000000000BKC2 S2 148 168 XTEAWT-00-0000000000JC2 XTEAWT-00-000000000BJC2 XTEAWT-00-000000000LJC2 R5 139 158 XTEAWT-00-0000000000HC2 XTEAWT-00-000000000BHC2 XTEAWT-00-000000000LHC2 R4 130 148 XTEAWT-00-0000000000GC2 XTEAWT-00-000000000BGC2 XTEAWT-00-000000000LGC2 R3 122 140 XTEAWT-00-0000000000FC2 XTEAWT-00-000000000BFC2 XTEAWT-00-000000000LFC2 R2 114 130 XTEAWT-00-0000000000EC2 XTEAWT-00-000000000BEC2 XTEAWT-00-000000000LEC2 S3 156 177 XTEAWT-00-0000000000KC3 XTEAWT-00-000000000BKC3 S2 148 168 XTEAWT-00-0000000000JC3 XTEAWT-00-000000000BJC3 XTEAWT-00-000000000LJC3 R5 139 158 XTEAWT-00-0000000000HC3 XTEAWT-00-000000000BHC3 XTEAWT-00-000000000LHC3 R4 130 148 XTEAWT-00-0000000000GC3 XTEAWT-00-000000000BGC3 XTEAWT-00-000000000LGC3 R3 122 140 XTEAWT-00-0000000000FC3 XTEAWT-00-000000000BFC3 XTEAWT-00-000000000LFC3 R2 114 130 XTEAWT-00-0000000000EC3 XTEAWT-00-000000000BEC3 XTEAWT-00-000000000LEC3 4500K 4300K 75 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Kit F5 E5 CCT 4250K 4000K Minimum Luminous Flux (lm) @ 350mA Order Codes Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI S3 156 177 XTEAWT-00-0000000000KF5 S2 148 168 XTEAWT-00-0000000000JF5 XTEAWT-00-000000000BJF5 R5 139 158 XTEAWT-00-0000000000HF5 XTEAWT-00-000000000BHF5 XTEAWT-00-000000000LHF5 R4 130 148 XTEAWT-00-0000000000GF5 XTEAWT-00-000000000BGF5 XTEAWT-00-000000000LGF5 XTEAWT-00-000000000HGF5 R3 122 140 XTEAWT-00-0000000000FF5 XTEAWT-00-000000000BFF5 XTEAWT-00-000000000LFF5 XTEAWT-00-000000000HFF5 R2 114 130 XTEAWT-00-0000000000EF5 XTEAWT-00-000000000BEF5 XTEAWT-00-000000000LEF5 XTEAWT-00-000000000HEF5 Q5 107 122 XTEAWT-00-0000000000DF5 XTEAWT-00-000000000BDF5 XTEAWT-00-000000000LDF5 XTEAWT-00-000000000HDF5 Q4 100 114 XTEAWT-00-000000000LCF5 XTEAWT-00-000000000HCF5 Q3 93.9 Q2 70 CRI Minimum 75 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000PCF5 XTEAWT-00-000000000UCF5 107 XTEAWT-00-000000000PBF5 XTEAWT-00-000000000UBF5 87.4 99.2 XTEAWT-00-000000000PAF5 XTEAWT-00-000000000UAF5 P4 80.6 91.5 XTEAWT-00-000000000P9F5 XTEAWT-00-000000000U9F5 S3 156 177 XTEAWT-00-0000000000KE5 S2 148 168 XTEAWT-00-0000000000JE5 XTEAWT-00-000000000BJE5 R5 139 158 XTEAWT-00-0000000000HE5 XTEAWT-00-000000000BHE5 XTEAWT-00-000000000LHE5 R4 130 148 XTEAWT-00-0000000000GE5 XTEAWT-00-000000000BGE5 XTEAWT-00-000000000LGE5 XTEAWT-00-000000000HGE5 R3 122 140 XTEAWT-00-0000000000FE5 XTEAWT-00-000000000BFE5 XTEAWT-00-000000000LFE5 XTEAWT-00-000000000HFE5 R2 114 130 XTEAWT-00-0000000000EE5 XTEAWT-00-000000000BEE5 XTEAWT-00-000000000LEE5 XTEAWT-00-000000000HEE5 Q5 107 122 XTEAWT-00-0000000000DE5 XTEAWT-00-000000000BDE5 XTEAWT-00-000000000LDE5 XTEAWT-00-000000000HDE5 Q4 100 114 XTEAWT-00-000000000LCE5 XTEAWT-00-000000000HCE5 XTEAWT-00-000000000PCE5 XTEAWT-00-000000000UCE5 Q3 93.9 107 XTEAWT-00-000000000PBE5 XTEAWT-00-000000000UBE5 Q2 87.4 99.2 XTEAWT-00-000000000PAE5 XTEAWT-00-000000000UAE5 P4 80.6 91.5 XTEAWT-00-000000000P9E5 XTEAWT-00-000000000U9E5 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum 80 CRI Typical R5 139 158 XTEAWT-00-0000000000HF6 XTEAWT-00-000000000BHF6 XTEAWT-00-000000000LHF6 R4 130 148 XTEAWT-00-0000000000GF6 XTEAWT-00-000000000BGF6 XTEAWT-00-000000000LGF6 R3 122 140 XTEAWT-00-0000000000FF6 XTEAWT-00-000000000BFF6 XTEAWT-00-000000000LFF6 XTEAWT-00-000000000HFF6 R2 114 130 XTEAWT-00-0000000000EF6 XTEAWT-00-000000000BEF6 XTEAWT-00-000000000LEF6 XTEAWT-00-000000000HEF6 Q5 107 122 XTEAWT-00-0000000000DF6 XTEAWT-00-000000000BDF6 XTEAWT-00-000000000LDF6 XTEAWT-00-000000000HDF6 Q4 100 114 XTEAWT-00-000000000LCF6 XTEAWT-00-000000000HCF6 Q3 93.9 Q2 F6 E6 CCT 3750K 3500K Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000PCF6 XTEAWT-000000-00000UCF6 107 XTEAWT-00-000000000PBF6 XTEAWT-000000-00000UBF6 87.4 99.2 XTEAWT-00-000000000PAF6 XTEAWT-000000-00000UAF6 P4 80.6 91.5 XTEAWT-00-000000000P9F6 XTEAWT-000000-00000U9F6 R5 139 158 XTEAWT-00-0000000000HE6 XTEAWT-00-000000000BHE6 XTEAWT-00-000000000LHE6 R4 130 148 XTEAWT-00-0000000000GE6 XTEAWT-00-000000000BGE6 XTEAWT-00-000000000LGE6 R3 122 140 XTEAWT-00-0000000000FE6 XTEAWT-00-000000000BFE6 XTEAWT-00-000000000LFE6 XTEAWT-00-000000000HFE6 R2 114 130 XTEAWT-00-0000000000EE6 XTEAWT-00-000000000BEE6 XTEAWT-00-000000000LEE6 XTEAWT-00-000000000HEE6 Q5 107 122 XTEAWT-00-0000000000DE6 XTEAWT-00-000000000BDE6 XTEAWT-00-000000000LDE6 XTEAWT-00-000000000HDE6 Q4 100 114 XTEAWT-00-000000000LCE6 XTEAWT-00-000000000HCE6 XTEAWT-00-000000000PCE6 XTEAWT-000000-00000UCE6 Q3 93.9 107 XTEAWT-00-000000000PBE6 XTEAWT-000000-00000UBE6 Q2 87.4 99.2 XTEAWT-00-000000000PAE6 XTEAWT-000000-00000UAE6 P4 80.6 91.5 XTEAWT-00-000000000P9E6 XTEAWT-000000-00000U9E6 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum 80 CRI Typical R4 130 148 XTEAWT-00-0000000000GF7 XTEAWT-00-000000000BGF7 XTEAWT-00-000000000LGF7 R3 122 140 XTEAWT-00-0000000000FF7 XTEAWT-00-000000000BFF7 XTEAWT-00-000000000LFF7 XTEAWT-00-000000000HFF7 R2 114 130 XTEAWT-00-0000000000EF7 XTEAWT-00-000000000BEF7 XTEAWT-00-000000000LEF7 XTEAWT-00-000000000HEF7 Q5 107 122 XTEAWT-00-0000000000DF7 XTEAWT-00-000000000BDF7 XTEAWT-00-000000000LDF7 XTEAWT-00-000000000HDF7 Q4 100 114 XTEAWT-00-0000000000CF7 XTEAWT-00-000000000BCF7 XTEAWT-00-000000000LCF7 XTEAWT-00-000000000HCF7 Q3 93.9 107 XTEAWT-00-000000000LBF7 XTEAWT-00-000000000HBF7 Q2 87.4 P4 F7 E7 CCT 3250K 3000K Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000PBF7 XTEAWT-000000-00000UBF7 99.2 XTEAWT-00-000000000PAF7 XTEAWT-000000-00000UAF7 80.6 91.5 XTEAWT-00-000000000P9F7 XTEAWT-000000-00000U9F7 P3 73.9 83.9 XTEAWT-00-000000000P8F7 XTEAWT-000000-00000U8F7 R4 130 148 XTEAWT-00-0000000000GE7 XTEAWT-00-000000000BGE7 XTEAWT-00-000000000LGE7 R3 122 140 XTEAWT-00-0000000000FE7 XTEAWT-00-000000000BFE7 XTEAWT-00-000000000LFE7 XTEAWT-00-000000000HFE7 R2 114 130 XTEAWT-00-0000000000EE7 XTEAWT-00-000000000BEE7 XTEAWT-00-000000000LEE7 XTEAWT-00-000000000HEE7 Q5 107 122 XTEAWT-00-0000000000DE7 XTEAWT-00-000000000BDE7 XTEAWT-00-000000000LDE7 XTEAWT-00-000000000HDE7 Q4 100 114 XTEAWT-00-0000000000CE7 XTEAWT-00-000000000BCE7 XTEAWT-00-000000000LCE7 XTEAWT-00-000000000HCE7 Q3 93.9 107 XTEAWT-00-000000000LBE7 XTEAWT-00-000000000HBE7 XTEAWT-00-000000000PBE7 XTEAWT-000000-00000UBE7 Q2 87.4 99.2 XTEAWT-00-000000000PAE7 XTEAWT-000000-00000UAE7 P4 80.6 91.5 XTEAWT-00-000000000P9E7 XTEAWT-000000-00000U9E7 P3 73.9 83.9 XTEAWT-00-000000000P8E7 XTEAWT-000000-00000U8E7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLamp (R) XT-E LED Flux Characteristics - White (TJ=85C) - continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85C Flux (lm) @ 25C* No Minimum CRI 70 CRI Minimum 80 CRI Typical R3 122 140 XTEAWT-00-0000000000FF8 XTEAWT-00-000000000BFF8 XTEAWT-00-000000000LFF8 R2 114 130 XTEAWT-00-0000000000EF8 XTEAWT-00-000000000BEF8 XTEAWT-00-000000000LEF8 XTEAWT-00-000000000HEF8 Q5 107 122 XTEAWT-00-0000000000DF8 XTEAWT-00-000000000BDF8 XTEAWT-00-000000000LDF8 XTEAWT-00-000000000HDF8 Q4 100 114 XTEAWT-00-0000000000CF8 XTEAWT-00-000000000BCF8 XTEAWT-00-000000000LCF8 XTEAWT-00-000000000HCF8 Q3 93.9 107 XTEAWT-00-0000000000BF8 XTEAWT-00-000000000BBF8 XTEAWT-00-000000000LBF8 XTEAWT-00-000000000HBF8 XTEAWT-00-000000000PBF8 Q2 87.4 99.2 XTEAWT-00-000000000LAF8 XTEAWT-00-000000000HAF8 XTEAWT-00-000000000PAF8 XTEAWT-000000-00000UAF8 P4 80.6 91.5 XTEAWT-00-000000000P9F8 XTEAWT-000000-00000U9F8 P3 73.9 83.9 XTEAWT-00-000000000P8F8 XTEAWT-000000-00000U8F8 R3 122 140 XTEAWT-00-0000000000FE8 XTEAWT-00-000000000BFE8 XTEAWT-00-000000000LFE8 R2 114 130 XTEAWT-00-0000000000EE8 XTEAWT-00-000000000BEE8 XTEAWT-00-000000000LEE8 XTEAWT-00-000000000HEE8 Q5 107 122 XTEAWT-00-0000000000DE8 XTEAWT-00-000000000BDE8 XTEAWT-00-000000000LDE8 XTEAWT-00-000000000HDE8 Q4 100 114 XTEAWT-00-0000000000CE8 XTEAWT-00-000000000BCE8 XTEAWT-00-000000000LCE8 XTEAWT-00-000000000HCE8 Q3 93.9 107 XTEAWT-00-0000000000BE8 XTEAWT-00-000000000BBE8 XTEAWT-00-000000000LBE8 XTEAWT-00-000000000HBE8 XTEAWT-00-000000000PBE8 Q2 87.4 99.2 XTEAWT-00-000000000LAE8 XTEAWT-00-000000000HAE8 XTEAWT-00-000000000PAE8 XTEAWT-000000-00000UAE8 P4 80.6 91.5 XTEAWT-00-000000000P9E8 XTEAWT-000000-00000U9E8 P3 73.9 83.9 XTEAWT-00-000000000P8E8 XTEAWT-000000-00000U8E8 Q4 100 114 XTEAWT-00-000000000BCEA Q3 93.9 107 XTEAWT-00-000000000BBEA XTEAWT-00-000000000HBEA Q2 87.4 99.2 XTEAWT-00-000000000BAEA XTEAWT-00-000000000HAEA P4 80.6 91.5 XTEAWT-00-000000000B9EA XTEAWT-00-000000000H9EA P3 73.9 83.9 F8 E8 EA CCT 2850K 2700K 2200K Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XTEAWT-00-000000000H8EA Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLamp (R) XT-E LED Flux Characteristics - Royal Blue (TJ=85C) The following tables provide order codes for XLamp XT-E royal blue LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 32). Dominant Wavelength Range DWL Kit Codes Min. Max. Order Codes, Minimum Radiant Flux @ 350mA, Tj=85C Group DWL (nm) Group DWL (nm) 475 mW - Radiant Flux Group Code 31(K) 500 mW - Radiant Flux Group Code 32(L) 525 mW - Radiant Flux Group Code 33(M) 01 D36 450 D57 465 XTEARY-00-0000-000000K01 XTEARY-00-0000-000000L01 XTEARY-00-0000-000000M01 02 D36 450 D47 460 XTEARY-00-0000-000000K02 XTEARY-00-0000-000000L02 XTEARY-00-0000-000000M02 03 D46 455 D57 465 XTEARY-00-0000-000000K03 XTEARY-00-0000-000000L03 XTEARY-00-0000-000000M03 04 D36 450 D37 455 XTEARY-00-0000-000000K04 XTEARY-00-0000-000000L04 XTEARY-00-0000-000000M04 05 D46 455 D47 460 XTEARY-00-0000-000000K05 XTEARY-00-0000-000000L05 XTEARY-00-0000-000000M05 06 D56 460 D57 465 XTEARY-00-0000-000000K06 XTEARY-00-0000-000000L06 XTEARY-00-0000-000000M06 07 D37 452.5 D46 457.5 XTEARY-00-0000-000000K07 XTEARY-00-0000-000000L07 XTEARY-00-0000-000000M07 08 D47 457.5 D56 462.5 XTEARY-00-0000-000000K08 XTEARY-00-0000-000000L08 XTEARY-00-0000-000000M08 09 D37 452.5 D56 462.5 XTEARY-00-0000-000000K09 XTEARY-00-0000-000000L09 XTEARY-00-0000-000000M09 Dominant Wavelength Range DWL Kit Codes Min. Max. Order Codes, Minimum Radiant Flux @ 350mA, Tj=85C Group DWL (nm) Group DWL (nm) 550 mW - Radiant Flux Group Code 34(N) 575 mW - Radiant Flux Group Code 35(P) 600 mW - Radiant Flux Group Code 36(Q) 01 D36 450 D57 465 XTEARY-00-0000-000000N01 XTEARY-00-0000-000000P01 XTEARY-00-0000-000000Q01 02 D36 450 D47 460 XTEARY-00-0000-000000N02 XTEARY-00-0000-000000P02 XTEARY-00-0000-000000Q02 03 D46 455 D57 465 XTEARY-00-0000-000000N03 XTEARY-00-0000-000000P03 04 D36 450 D37 455 XTEARY-00-0000-000000N04 XTEARY-00-0000-000000P04 05 D46 455 D47 460 XTEARY-00-0000-000000N05 XTEARY-00-0000-000000P05 06 D56 460 D57 465 XTEARY-00-0000-000000N06 07 D37 452.5 D46 457.5 XTEARY-00-0000-000000N07 08 D47 457.5 D56 462.5 XTEARY-00-0000-000000N08 09 D37 452.5 D56 462.5 XTEARY-00-0000-000000N09 XTEARY-00-0000-000000Q04 XTEARY-00-0000-000000P07 XTEARY-00-0000-000000P09 Note: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1nm on dominant wavelength measurements.See the Measurements section (page 34). * Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLamp (R) XT-E LED Relative Spectral Power Relative Spectral Power Distribution - White 100% Relative Radiant Power 80% 60% 5000 K - 8300 K CCT 2600 K - 3700 K CCT 2200 K CCT 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power Relative Spectral Power Distribution - Royal Blue 100% Relative Radiant Power 80% 60% Royal Blue 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLamp (R) XT-E LED Relative Flux Output vs. Junction Temperature Relative Luminous Flux vs. Junction Temperature (IF = 350mA) - White 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Relative Flux Output vs. Junction Temperature Relative Radiant Flux vs. Junction Temperature (IF = 350mA) - Royal Blue 120% Relative Radiant Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLamp (R) XT-E LED Electrical Characteristics (TJ=85C) Electrical Characteristics (Tj = 85C) 1600 Forward Current (mA) 1400 1200 1000 800 600 400 200 0 2.50 2.75 3.00 3.25 3.50 Forward Voltage (V) Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLamp (R) XT-E LED Relative Intensity vs. Current (Tj = 85C) Relative Luminous Flux vs. Current (TJ=85C) - White 350% Relative Luminous Flux 300% 250% 200% 150% 100% 50% 0% 0 200 400 600 800 1000 1200 1400 1600 1200 1400 1600 Forward Current (mA) Relative Radiant Flux vs. Current (Tj = 85C) Relative Radiant Flux vs. Current (TJ=85C) - Royal Blue 350% Relative Radiant Flux 300% 250% 200% 150% 100% 50% 0% 0 200 400 600 800 1000 Forward Current (mA) Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLamp (R) XT-E LED Relative Chromaticity Vs. Current, WW Relative Chromaticity vs. Current and Temperature (Warm White) 0.020 T = 85 C J 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 200 400 600 800 1000 1200 1400 1600 Current (mA) Relative Chromaticity Vs. Temperature WW 0.020 I = 350 mA F 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 20 40 60 80 100 120 140 160 Tsp (C) Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLamp (R) XT-E LED Typical Spatial Radiation Pattern Typical Spatial Distribution - White 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 10 30 50 70 90 Angle () Typical Spatial Distribution Typical Spatial Distribution - Royal Blue 100% 90% Relative Luminous Intensit 80% 70% 60% 50% 40% 30% 20% 10% -90 -70 -50 -30 -10 0% Angle () Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLamp (R) XT-E LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end productThermal to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life Design and optical characteristics. 1600 Maximum Current (mA) 1400 1200 1000 800 600 Rj-a = 10C/W 400 Rj-a = 15C/W Rj-a = 20C/W 200 Rj-a = 25C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Performance Groups - Luminous Flux (TJ=85C) XLamp XT-E white LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Minimum Luminous Flux Maximum Luminous Flux P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 R5 139 148 S2 148 156 S3 156 164 S4 164 172 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLamp (R) XT-E LED Performance Groups - Radiant Flux (TJ=85C) XLamp XT-E royal blue LEDs are tested for radiant flux and placed into one the following bins. Group Code Minimum Radiant Flux (mW) Maximum Radiant Flux (mW) 31 (K) 475 500 32 (L) 500 525 33 (M) 525 550 34 (N) 550 575 35 (P) 575 600 36 (Q) 600 625 Performance Groups - Dominant Wavelength (TJ=85C) XLamp XT-E royal blue LEDs are tested for dominant wavelength and placed into one of the regions defined by the following bounding coordinates. Group Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) D36 450.0 452.5 D37 452.5 455.0 D46 455.0 457.5 D47 457.5 460.0 D56 460.0 462.5 D57 462.5 465.0 Performance Groups - Forward Voltage (TJ=85C) XLamp XT-E white and royal blue LEDs are tested for forward voltage and placed into one the following voltage bins. Group Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) F 2.75 3.00 G 3.00 3.25 H 3.25 3.50 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLamp (R) XT-E LED Performance Groups - Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2980 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.3048 0.3130 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 Region x y 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3042 0.2984 0.2880 0.2895 0.2870 0.3210 0.2937 0.3312 0.2962 0.3220 0.3207 0.3028 0.3304 0.3290 0.3115 0.3391 0.3130 0.3290 0.3213 0.3373 0.3113 0.3048 0.3207 0.3130 0.3113 0.3005 0.3415 0.3099 0.3099 0.3509 0.3196 0.3602 0.3115 0.3391 0.3205 0.3481 0.2993 0.3028 0.3304 0.3115 0B 0S 1B 1S Region x y 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3133 0.3048 0.3135 0.2962 0.2937 0.3312 0.3005 0.3415 0.3028 0.3304 0.3115 0.3205 0C 0T 1C 1T Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3207 0.3009 0.3042 0.3220 0.3037 0.2937 0.3009 0.3042 0.3068 0.3113 0.3093 0.2993 0.3391 0.3130 0.3290 0.3481 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3391 0.3161 0.3059 0D 0U 1D 1U 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 0.3366 0.3369 0.3381 0.3762 0.3480 0.3840 0.3440 0.3428 0.3440 0.3428 0.3480 0.3840 0.3571 0.3907 0.3515 0.3487 0.3429 0.3307 0.3463 0.3687 0.3551 0.3760 0.3495 0.3339 0.3361 0.3245 0.3376 0.3616 0.3463 0.3687 0.3429 0.3307 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 0.3512 0.3465 0.3571 0.3907 0.3668 0.3957 0.3590 0.3521 0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578 0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440 0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389 2B 2S 3B 3S 4B 4S 2C 2T 3C 3T 4C 4T 2D 2U 3D 3U 4D 4U Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLamp (R) XT-E LED Performance Groups - Chromaticity (continued) Region 5A 5A1 5B1 5C1 5D1 5R 6A 6A1 6B1 6C1 x y 0.3702 0.3722 0.3825 0.3798 0.3783 0.3646 Region 5B x y 0.3736 0.3874 0.3870 0.3958 0.3825 0.3798 Region 5C x y 0.3870 0.3958 0.4006 0.4044 0.3951 0.3876 Region 5D x y 0.3825 0.3798 0.3951 0.3876 0.3898 0.3716 0.3670 0.3578 0.3702 0.3722 0.3825 0.3798 0.3783 0.3646 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3612 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3670 0.3578 0.3771 0.4034 0.3916 0.4127 0.3783 0.3646 0.3783 0.3646 0.3916 0.4127 0.4064 0.4221 0.3898 0.3716 0.3743 0.3502 0.3869 0.3958 0.4006 0.4044 0.3848 0.3565 0.3640 0.3440 0.3736 0.3874 0.3869 0.3958 0.3743 0.3502 0.3941 0.3848 0.3996 0.4015 0.4146 0.4089 0.4080 0.3916 0.4080 0.3916 0.4146 0.4089 0.4299 0.4165 0.4221 0.3985 0.4017 0.3752 0.4080 0.3916 0.4221 0.3985 0.4147 0.3814 0.3889 0.369 0.3941 0.3848 0.4080 0.3916 0.4017 0.3752 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.4080 0.3916 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 5A2 5B2 5C2 5D2 5S 6B 6A2 6B2 6C2 5A3 5B3 5C3 5D3 5T 6C 6A3 6B3 6C3 5A4 5B4 5C4 5D4 5U 6D 6A4 6B4 6C4 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLamp (R) XT-E LED Performance Groups - Chromaticity (continued) Region 6D1 6R 7A 7A1 7B1 7C1 7D1 8A 8A1 8B1 x y 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3889 0.4017 0.3751 0.3957 0.3596 0.3840 0.3540 0.4221 0.4342 0.4260 0.3853 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 Region x y 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.3782 0.4116 0.3690 0.4054 0.4217 0.4273 0.4146 0.4089 0.3996 0.4015 0.3985 0.4299 0.4028 0.4430 0.4342 0.4028 0.4221 0.3985 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 6D2 6S 7B 7A2 Region x y 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.3865 0.4183 0.4191 0.4217 0.4382 0.4356 0.4299 0.4165 0.4146 0.4089 0.4165 0.4430 0.4212 0.4562 0.4465 0.4071 0.4342 0.4028 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 6D3 6T 7C 7A3 Region x y 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.3898 0.4147 0.3814 0.4273 0.4017 0.3751 0.4147 0.3814 0.4077 0.3652 0.3957 0.3596 0.4212 0.4342 0.4028 0.426 0.4465 0.4071 0.4373 0.3893 0.4260 0.3853 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 6D4 6U 7D 7A4 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 0.4049 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.4259 0.3853 0.4300 0.3939 0.4359 0.3960 0.4316 0.3873 0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.4465 0.4071 0.4562 0.4260 0.4687 0.4289 0.4582 0.4099 0.4582 0.4099 0.4687 0.4289 0.4813 0.4319 0.4700 0.4126 0.4483 0.3918 0.4582 0.4099 0.4700 0.4126 0.4593 0.3944 0.4373 0.3893 0.4465 0.4071 0.4582 0.4099 0.4483 0.3918 0.4373 0.3893 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 7B2 7C2 7D2 8B 8A2 7B3 7C3 7D3 8C 8A3 7B4 7C4 7D4 8D 8A4 0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 8B2 8B3 8B4 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLamp (R) XT-E LED Performance Groups - Chromaticity (continued) Region 8C1 8D1 9A1 9B1 9C1 9D1 AA1 AB1 AC1 AD1 x y 0.4582 0.4158 0.4634 0.4252 0.4695 0.4250 0.4641 0.4483 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4647 0.4706 0.4650 0.3951 0.4593 0.3944 0.4757 0.4222 0.4819 0.4231 0.4762 0.4135 Region x y 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4156 0.4695 0.3919 0.4532 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4035 0.4700 0.4043 0.4761 0.4706 0.4043 0.4647 0.4035 0.4813 0.4319 0.4877 0.4327 0.4819 0.4231 8C2 8D2 9A2 9B2 Region x y 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4207 0.4756 0.4008 0.4589 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4126 0.4762 0.4135 0.4823 0.4765 0.4051 0.4706 0.4043 0.4762 0.4135 0.4942 0.4335 0.4882 0.4239 8C3 8D3 9A3 9B3 Region x y 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4221 0.4700 0.4126 0.4021 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 0.4135 0.4706 0.4043 0.4144 0.4765 0.4051 0.4708 0.3959 0.4650 0.3951 0.4819 0.4231 0.4882 0.4239 0.4823 0.4144 8C4 8D4 9A4 9B4 0.4700 0.4126 0.4757 0.4223 0.4819 0.4231 0.4725 0.4135 0.4882 0.4239 0.4942 0.4335 0.5006 0.4342 0.4945 0.4248 0.4945 0.4248 0.5006 0.4342 0.5070 0.4350 0.5008 0.4256 0.4885 0.4153 0.4945 0.4248 0.5008 0.4256 0.4946 0.4162 0.4823 0.4144 0.4882 0.4239 0.4945 0.4248 0.4885 0.4153 0.4765 0.4051 0.4823 0.4144 0.4885 0.4153 0.4765 0.4051 0.4825 0.4059 0.4885 0.4153 0.4946 0.4162 0.4825 0.4059 0.4765 0.3966 0.4825 0.4059 0.4884 0.4068 0.4765 0.3966 9C2 9D2 9C3 9D3 9C4 9D4 0.4708 0.3959 0.4765 0.4051 0.4825 0.4059 0.4706 0.3959 0.4822 0.3973 0.4884 0.4067 0.4942 0.4066 0.4879 0.3972 0.4884 0.4067 0.4946 0.4162 0.5006 0.4160 0.4942 0.4066 0.4942 0.4066 0.5006 0.4160 0.5066 0.4158 0.5001 0.4064 0.4879 0.3972 0.4942 0.4066 0.5001 0.4064 0.4936 0.3970 0.4946 0.4162 0.5008 0.4256 0.5069 0.4254 0.5006 0.4160 0.5008 0.4256 0.5070 0.4350 0.5133 0.4348 0.5069 0.4254 0.5069 0.4254 0.5133 0.4348 0.5196 0.4346 0.5131 0.4252 0.5006 0.4160 0.5069 0.4254 0.5131 0.4252 0.5066 0.4158 0.5066 0.4067 0.5131 0.4252 0.5192 0.4250 0.5126 0.4156 0.5131 0.4162 0.5196 0.4346 0.5258 0.4343 0.5192 0.4250 0.5192 0.4160 0.5258 0.4343 0.5321 0.4341 0.5253 0.4248 AA2 AB2 AC2 AA3 AB3 AC3 AA4 AB4 AC4 0.5126 0.4066 0.5192 0.4250 0.5253 0.4248 0.5186 0.4154 0.4936 0.3970 0.5001 0.4064 0.5059 0.4062 0.4993 0.3969 0.5001 0.4064 0.5066 0.4158 0.5126 0.4156 0.5059 0.4062 0.5059 0.4062 0.5126 0.4156 0.5186 0.4154 0.5118 0.4061 0.4993 0.3969 0.5059 0.4062 0.5118 0.4061 0.5050 0.3967 AD2 AD3 AD4 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 26 XLamp (R) XT-E LED Cree's Standard White Chromaticity Regions Plotted on the CIE 1931 Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 0.35 CCy 3B 2S 2C 1T 8000 K 1S 0.34 0T 0.33 0C 1D 2U ANSI C78.377A 2R 1U 0D 1R 0A 0.30 3R 2A 1A 0B 0.31 2D 1C 1B 0S 0.32 3A 2B 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral White and ANSI Warm White 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 7B3 7B2 0.41 6C3 4500 K 6C2 6B3 0.40 6B2 5C3 5000 K 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 5A2 4B 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8A3 8A2 8A4 4D 8D1 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 5D3 5D2 5A3 6D2 6A3 6A2 7A2 6D3 6B1 5C1 5B2 6C1 6B4 5C2 7C1 7B4 7B1 6C4 8B1 7C4 8B3 8B2 7C3 7C2 5A1 3B 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 XLamp (R) XT-E LED Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 0T 0C 0D 0A 0T CCy 0.33 2U ANSI C78.377A 2R 1U 0S 0.32 0C 0.31 1R 1R 0U 0.36 0.35 0.34 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.30 0.28 0.29 0.28 0.28 0.29 0.29 ANSI C78.377A 1U 0R 0.29 0.28 2U 2R 1A 0.30 0R CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 3S 50 6500 K 0.36 1U 0.31 1R 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.28 0.29 0.28 0.28 0.29 0.30 1R 0U 0R 0R 0.29 1U 0D 0.30 0.29 0.28 ANSI C78.377A 2R 1A 0A 0U 2U 0.36 0A 0.30 0C 0B 1D 0.35 0D 0S 0.32 3R 2A 1B 0.34 0.31 ANSI C78.377A 2R 1A 0T 0.33 2U 2D 1C 0.33 0C 0B 1D 3A 2B 1S 0.32 0S 0.32 3R 2A 1B 2C 8000 K 0.34 3B 2S 1T 0.31 0T 0.33 3A 2D 1C 2T E1 0.35 2B 1S 0.36 3B CCy 8000 K 3S 6500 K 2C 1T 0.34 5700 K 0.37 2T 2S 0.35 5000 K 0.39 5700 K 0.37 CCy 3R 2A 1D 0D 0A 0U 2D 1C 1B 0B 3A 2B 1S 0.33 0.30 3R 2A 1D 1A 1T 0.34 0.32 0B 0.31 1C 1B 0S 0.32 2D 3B 2C 8000 K 3A 2B 3S 2T 2S 0.35 0.31 0.33 0.36 3B 1T 1S 53 6500 K 2C 8000 K 0.34 5700 K 0.37 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0.31 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 0A 2D 1C 1B 0B 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 XLamp (R) XT-E LED Cree's Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions 0.44 0.44 0.43 6T 4000 K 0.41 4500 K C1 0.40 4T 4S 0.38 3T 3S 0.37 4B 3C 0.36 3B 5C2 6B2 5C3 6C1 6B4 6B1 5C4 5B2 5C1 6C4 6D2 6D3 6D4 3U 0.38 5B2 3T 5A2 4B 3C 0.36 3B 5A1 4D 4A 3D 0.35 ANSI C78.377A 5B1 4C 3S 0.37 5C1 5B4 6A2 6D4 6D1 6A4 6A1 6D3 6D2 6A3 6U 6R 5U 5R ANSI C78.377A 4R 3U 3R 0.33 0.44 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.43 0.32 0.32 CCx CCx 0.44 0.44 0.43 3500 K 6T 3D 0.35 4A 0.38 0.37 5B4 5D2 5A3 5A4 5D1 5D3 5D4 6A1 6A4 6D3 6D2 6A3 6A2 6C1 6B4 6B1 6D4 6D1 6U 6R 5U 5R ANSI C78.377A 4R 3U 3R 0.32 0.34 0.33 0.44 0.43 0.42 0.41 0.40 5A1 5C4 5C1 4U 3A 0.34 0.39 0.38 0.37 0.36 0.35 4D 4A 3D 0.35 ANSI C78.377A 0.33 0.34 5A2 4B 3B 5B1 4C 3C 0.36 0.32 0.33 5B3 5B2 3T 3S 3R 0.33 5C2 4T 4S 5R 4R 3U 5000 K 0.39 4U 3A 0.34 6C1 6B1 6C4 CCx 0.44 3B 5C4 6C3 6C2 6B3 6B2 5C3 0.43 3C 0.36 5C2 5C1 5T 5S 0.42 5B3 4500 K D2 0.40 0.41 3T 3S 0.37 0.41 6C4 CCy 4T 5B2 0.38 6C3 6C2 6B3 6B2 5C3 6S 0.40 5T 5S 6B4 6D3 6D2 6A3 4S 6D4 6A2 5B4 5D3 6D1 5B1 5D2 6A4 4C 5A3 5D4 6A1 5A2 6U 5D1 4B 5A4 6R 5A1 4D 5U 5000 K 0.39 4500 K 0.39 C2 0.40 6T 4000 K 0.35 0.41 6S 0.38 4000 K 3500 K 0.42 0.37 0.42 0.36 0.43 CCy 5D4 5D1 5A4 5D3 5D2 5A3 6C1 6B4 6B1 5C4 6C4 4U 3A 0.34 3R 0.33 5B3 6C3 6C2 6B3 6B2 5C3 5C2 4T 4S 5R 4R 5T 5S 5000 K 0.39 6S 4500 K D1 0.40 4U 3A 0.34 5B3 6T 4000 K 0.41 6C3 6C2 6B3 6A3 5B4 5D3 6A2 6D1 5B1 5D2 6A4 4C 6A1 5A3 5D4 5A2 6U 5D1 5A4 6R 5A1 4D 5U 4A 3D 0.35 5T 5S 5000 K 0.39 6S 3500 K 0.42 CCy 0.42 CCy 0.43 3500 K CCx 0.44 0.43 3500 K 6T 0.42 0.41 4500 K C3 4000 K 5T 0.40 5S 5000 K CCy 0.39 0.38 3T 3S 0.37 4B 3C 0.36 3B 3D 0.35 6B2 6B3 6C3 6C2 6C1 6C4 5B2 5B3 5C2 5C1 5C4 6B1 5R 4U 3A 0.34 4A 5C3 6B4 6D3 6D2 6A3 6D4 5B4 5D3 6A2 6D1 5B1 5D2 6A4 4C 5A3 5D4 6A1 5A2 6U 5D1 5A4 6R 5A1 4D 5U 4T 4S 6S ANSI C78.377A 4R 3U 3R 0.33 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 CCx Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29 XLamp (R) XT-E LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 E4 6D2 6A3 6A2 7A4 7A1 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 6A4 6A1 5D4 5D1 ANSI C78.377A 5A4 3B 8B2 6D1 5D2 5A2 6D4 8D1 8A4 8A1 7D4 7D1 8A3 8A2 7D3 7D2 7A3 7A2 6D3 8B1 7C4 7C1 7B4 7B1 6C1 6B1 5C4 5D3 5A3 4B 3C 5A1 4D 0.36 5B1 6C2 6C4 6B4 5C1 5B4 4C 6B2 5C3 5C2 5B3 5B2 6C3 6B3 7C2 7B3 7B2 7C3 E8 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 0.39 F4 0.38 0.37 6B1 5C4 6A2 5D3 7A2 6D3 6D2 6A3 5D2 5A3 5A2 4B 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8A2 8A4 8A3 8D1 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B1 6C1 7C1 7B4 7B1 6C4 6B4 5C1 5B4 3C 0.36 5B3 5B2 4C 6C2 8B1 7C4 8B3 8B2 7C3 7C2 7B3 7B2 6B2 5C3 5C2 F7 6C3 6B3 F5 5000 K F6 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 30 XLamp (R) XT-E LED Cree's 2200K CCT White Kit Plotted on ANSI Standard Chromaticity Regions 0.45 0.44 3000 K 0.43 0.42 CCy 8B1 7C4 0.41 0.40 7C3 7C2 7D3 8A1 8A3 8A2 8A4 8D1 8B2 8B4 8D2 AB2 AB3 AB4 AC1 2200 K AC2 8C3 8C2 8B3 EA 2450 K 2700 K AB1 AC3 AC4 8C4 8C1 AA2 AA3 AD2 AD3 8D3 AA1 AA4 AD1 8D4 AD4 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Cree's Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits for XT-E LEDs. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500K E1 1A, 1B, 1C, 1D 5700K E2 2A, 2B, 2C, 2D 5000K E3 3A, 3B, 3C, 3D 5000K C1 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S 4750K F4 3C, 3D, 4A, 4B 4750K D1 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U 4500K E4 4A, 4B, 4C, 4D 4500K D2 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S 4500K C2 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U 4300K C3 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S 4250K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 3750K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3250K F7 3000K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 2850K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2200K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 31 XLamp (R) XT-E LED Bin and Order Code Formats Bin codes and order codes for XT-E White LEDs are configured in the following manner: Order CodeBin Code SSSCCC-BD-HHHH-NNNNVRFGG Series XTE = XT-E Series XTE = XT-E Configuration B: Internal code D: Reel size Internal code Color specification 0: No minimum CRI B: 70 minimum CRI L: Standard CRI H: 80 CRI minimum P: 85 CRI minimum U: 90 CRI minimum Color specification 0: No minimum CRI B: 70 minimum CRI L: Standard CRI H: 80 CRI minimum P: 85 CRI minimum U: 90 CRI minimum Chromaticity kit Luminous flux group SSSCCC-B-WWW-FFF-VR-AAAA Internal code Flux Voltage performance group Voltage specification Chromaticity bin Internal code Color AWT = White Color AWT = White Bin codes and order codes for XT-E Royal Blue LEDs are configured as follows: Order CodeBin Code SSSSCC-BD-HHHH-NNNNNNNNN Series XTEA = XT-E Series XTEA = XT-E Configuration Dominant wavelength group Kit number SSSSCC-B-DDD-FFF-NN-NNNN Internal code Internal code Radiant flux group Color RY = Royal Blue Configuration Color RY = Royal Blue Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 32 XLamp (R) XT-E LED Reflow Soldering Characteristics In testing, Cree has found XLamp XT-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 33 XLamp (R) XT-E LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XT-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 34 XLamp (R) XT-E LED Notes - Continued UL(R) Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 35 XLamp (R) XT-E LED 6 5 6 4 5 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY INFORMATION OF CREE, INC. THIS PLOT MAY NOTCONSENT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. OF CREE INC. 3 4 REV Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. D 3.30 D B REM C ADDED O D CHANGED VIEWS T E CHANGED SO 3.30 All measurements are 0.13mm unless otherwise indicated. .50 3.45 2.36 0.18 3.45 6 6 2.36 0.18 .50 .83 5 5 2.30 .50 .83 4 4 .50 2.30 3 3 2 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE CONTAINED WITHIN ARE THE PROPRIETARY ANDTHE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANYOR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT 3.45 OF CREE INC. 3.45 OF CREE INC. 2 6 REVISONS NOTICE C REV AND THE INFORMATION DESCRIPTION CREE CONFIDENTIAL.CTHIS PLOT D DWITHIN ARE THE PROPRIETARY AND CONTAINED B OF CREE, INC. THIS REMOVED CONFIDENTIAL INFORMATION PLOT CHIP DIMENSIONS MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY C ADDED OVERALL HEIGHT TOLERANCE UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. D 5 CHANGED SOLDERPAD3.45 AND STENCIL VIEWS Top View REV B 4 3 3.45 DATE DC 5/11/11 DC 5/16/14 APP'D DC 2/24/15 R1.53 DC 6/17/15 3.30 REF. 3.45 2 D CHANGED VIEWS T E CHANGED SO REVIS BY R1.53 .65 2.36 0.18 2.36 0.18 3.30 2.36 0.18 .65 .83 .83 B .50 .50 C E .50 3.30 REMOVED CHIP DIMENSION ADDED OVERALL HEIGHT TOLERA 1.30 2.30 D CHANGED VIEWS TO SHOW MORE CURREN 1.30 2.30 Side View .50 DESCRIPTION CHANGED SOLDERPAD AND STENCIL PRIMARY PRIMARY .50 2.30 3.30 REF .50 .83 .50 .50 .50 REV 3.30 D 3.45 ADDED OV 3.30 D 3.45 REM C 1 CHANGED VIEWS TO SHOW MORE CURRENT DESIGN E 2 3 .50 .50 .64 .50 3.30 3.30 .64 B C C B 3.45 3.30 3.30 REF. R1.53 3.30 3.30 C ANODE 3.30 R1.53 3.30.65 .25 3.30 1.30 .251.30 .65 ANODE .75 C PRIMARY .75 PRIMARY R1.53 Bottom View .65 1.30 3.30 A ALTERNATIVE 3.30 .50 A 1.01 1.30 1.30 ALL MEASUREMENTS ARE 3.30 2.30 .50 .XXX X THIRD ANGLE PROJECTION B .50 .50 3.30 6 0.13 mm U UNLES PRIMARY RECOMMENDED STENCIL PATTERNUNLESS OTHERWISE SPECIFIED 3.30 RECOMMENDED PCB SOLDER PAD DIMENSIONS ARE IN (HATCHED AREA IS.64 OPENING) .50 .50 .50 .50 .64 MILLIMETERS AND AFTER FINISH. RECOMMENDED STENCIL PATTERN TOLERANCE UNLESS SPECIFIED: THIRD ANGLE PROJECTION .XX .25 (HATCHED AREA IS OPENING) RECOMMENDED PCB SOLDER PAD B ALL MEASU Alternate Bottom View2.30 1.01 .50 6 3.30 .64 5 .25 .25 3.30 3.30 B 5 4 4 .125 .5 TOLERA D. CRONIN CHECK -APPROVED FOR SH -- FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 SURFACE FINISH: D ALTER MILLIME DRAWN BY MATERIAL -- SURF 3 FINAL PROTECTIVE FINISH -- 1.6 3 2 B 3.30 1.30 1.01 1.01 2.30 A ALL MEASUREMENTS ARE A N 3.30 1.30 A 3.30 3.30 3.30 Recommended PCB Solder Pad RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB 1.01 1.30SOLDER PAD 0.13 mm UNLESS OTHERWISE INDICATED. Copyright (c) 2011-2016 Cree, Inc. 3.30 All rights reserved. The information in this document is DATE DRAWN BY of UL LLC. 4600 Silicon Drive UNLESS Cree, OTHERWISE Inc.SPECIFIED UL(R) and the UR logo are registered trademarks D. CRONIN 3/8/11 DIMENSIONS ARE IN CHECK DATE MILLIMETERS AND AFTER FINISH. RECOMMENDED PCB SOLDER PAD --TOLERANCE UNLESS SPECIFIED: .XX .25 DATE APPROVED 6 TITLE .XXX .125 6--X .5 Durham, N.C 27703 Phone (919) 313-5300 Fax (919) 313-5558 5 .75 .25 .75 ALLARE MEASUREMENTS ALL MEASUREMENTS 0.13 mmARE U .75 2.30 3.30 DRAWN BY UNLESS OTHERWISE SPECIFIEDUNLESS OTHERWISE SPECIFIE D. CRONIN DIMENSIONS ARE IN DIMENSIONS ARE IN MILLIMETERSCHECK AND AFTER FINIS MILLIMETERS AND AFTER FINISH. RECOMMENDED RECOMMENDED STENCIL PATTERN STENCIL PATTERN TOLERANCE UNLESS SPECIFIED:TOLERANCE UNLESS-- SPECIFIE .XX .25 .XX APPROVED (HATCHED AREA IS(HATCHED OPENING) AREA IS OPENING) ALL MEASUREMENTS ARE 0.13 mm.25UNLESS OTHERWISE .XXX .12 .XXX .125 -X .5 X .5 2.30 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION SHEETMATERIAL METAL PARTS ON FOR SHEET METAL PARTS ONLYFOR DATE DRAWN BY (R) (R) subject to change3.30 without notice. Cree and XLamp are registered trademarks and the Cree logo .Xis a trademark of .X UNLESS OTHERWISE SPECIFIED 1.5 D. CRONIN1.5 3/8/11 .XX DIMENSIONS ARE IN .75 .XX .75 CHECK DATE MILLIMETERS AND AFTER FINISH. .XXX .25 .XXX .25 FINAL PROTECTIVE FINISH RECOMMENDED STENCIL PATTERN .5 -- X TOLERANCE UNLESS SPECIFIED: X -- .5 .XX .25 1.6 DATE APPROVED (HATCHED AREA IS OPENING) 1.6 SURFACE FINISH: SURFACE FINISH: TITLE .XXX .125 A --.5 5 4 3 4 3X 2 THIRD ANGLE PROJECTION MATERIAL FOR SHEET METAL PARTS ONLY Recommended Stencil Pattern (Shaded Area Is Open) -- 36 -- OUT 0. 0 Y 5 E1 1.7 Do REF 4.375 Bo (R) XLamp XT-E LED REF 4.375 Bo Y D1 1.5 MIN. SECTION Y-Y REF R0.2 TYPICAL All Cree carrier tapesKoconform to EIA-481D, Automated Component Handling Systems Standard. Y P1 D1 REF X X Tape and Reel R0.2 TYPICAL Ko F(III) R Do 1.5 5 P2 2.0 0.05 (I) 0. 0 Po 4.0 0.1 (II) CATHODE SIDE F(III) SECTION X-X REF 4.375 X SECTION Y-Y P1 W D +/- 0.1 3.70 2.40 5.50 8.00 12.00 +/- 0.1 +0.0/-0.1 +/- 0.05 P1 REV Ao 2 (III) B REF 0.59 +/- 0.1 +0.3/-0.1 Measured from centerline of sprocket hole to centerline of pocket. Cumulative tolerance of 10 sprocket REVISONS holes is 0.20. BY DESCRIPTION ADDED CATHODE AND ANODE NOTE of sprocket Measured from centerline DC REORIENTED DEVICE hole to centerline of pocket. Other material available. (II) 3 ANODE SIDE +/- 0.1 +0.0/-0.1 +/- 0.05 4 Y 3.70 D1 2.40 1.5 MIN. 5.50 8.00 12.00 3.70 Bo Ko F (I) 4 2.2 Bo Ko F NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. +/0.1 5 R 3.70 REF R0.2 TYPICAL Ko Ao Ao P1 W W Bo X 6 All dimensions in mm. REF 0.59 Y 5 Ao E1 1.75 0.1 T 0.30 0.05 4 2.2 1.5 MIN. SECTION Y-Y (IV) 1 DATE APP'D 2/26/12 +/- 0.1 +0.3/-0.1 SECTION X-X 1.5 .1 User Feed Direction 4.1 (I) Ao 3.70 3.70 +/- 0.1 2.40 +0.0/-0.1 6 5.50 +/- 0.05 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION 8.00 P 1WITHIN ARE THE PROPRIETARY +/- 0.1 CONTAINED AND C CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOTWBE COPIED, REPRODUCED 12.00OR DISCLOSED +0.3/-0.1TO ANY Bo Ko F 5 4 12.0 +.3 -.0 1 ANODE SIDE Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT O190 OF CREE, INC. User B 2.5.1 1.75 .10 1/2oOAOUAEAA UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE, INC. D Measured from centerline of sprocket hole to centerline of pocket. CATHODE(II)SIDE Cumulative tolerance ofSTART 10 sprocket holes is 0.20. (III) Measured from centerline of sprocket hole to centerline of pocket. 3 2 OE Foxit PDF Editor a1/4(IV) 2004Other material available. aeEEuO (c) by Foxit Software Company, 8.1 +/- 0.1END Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) Loaded Pockets (1000 Lamps) 5 4 D 3 2 OE Foxit PDF Editor a1/4aeEEuO (c) by Foxit Software Company, 2004 1/2oOAOUAEAA 1 16.40 Feed Direction D D C Carrier Tape C Pocket Tape 16.40 O190 O61 0.5 13mm OD 7" A C 7.5 '' C 12.40 +2.00 0 MEASURED AT HUB THIRD ANGLE PROJECTION B O13 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 O61 0.5 SURFACE FINISH: 6 5 4 D. CRONIN 4600 Silicon Drive Durham, N.C 27703 11/29/10 DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 DATE APPROVED -- -- B TITLE XP HEW LOADING SPEC MATERIAL -- SIZE FINAL PROTECTIVE FINISH -- 1.6 3 12.40 OD 7.5 MEASURED AT INSIDE EDGE 12.40 +2.00 '' 0 MEASURED AT HUB DATE DRAWN BY CHECK SCALE 2402-00014 SHEET 3.000 2 1 B Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of UNLESS OTHERWISE SPECIFIED Cree, Inc. UL(R)B and the UR logo are registered trademarks of UL LLC. 2012/5/25 LIUDEZHI DRAWN BY A DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: .X 0.3 .XX .13 O13 THIRD ANGLE PROJECTION 12.40 X 1 FOR SHEET METAL PARTS ONLY .X .25 DATE CHECK DATE APPROVED DATE 4600 Silicon Drive Durham, N.C 27703 Phone (919) 361-4770 A TITLE Reel, MATERIAL PS SIZE 7" x 12mm Wide DRAWING NO. REV. REV. DRAWING NO. C 37 B OF 1/ XLamp (R) XT-E LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 38