Crystal oscillator Epson Toyocom Product Number (please contact us) Q3603CA0xxxxx00 VOLTAGE -CONTROLLED CRYSTAL OSCILLATOR (VCXO) VG - 1201CA *Frequency range *Supply voltage *Function *External dimensions : : : : 1 MHz to 60 MHz 3.3 V(**C) or 5.0 V(**H) Output enable(OE) 7.0 x 5.0 x 1.4 t (mm) Typ. Actual size Specifications (characteristics) Item Specifications ANH / AKH / BNH / BKH ANC / AKC / BNC / BKC 1.000 MHz to 60.000 MHz H:5.0 V 0.5 V C:3.3 V 0.3 V -40 C to +125 C As per below table As per below table 30 mA Max. 25 mA Max. 15 mA Max. 12 mA Max. As per below table 20 kHz Min. 5 M Min. Positive polarity 40 % to 60 % VCC-0.4 V Min. 0.4 V Max. 15 pF Max. 70 %VCC Min. 30 % VCC Max. 4 ns Max. 10 ms Max. 10 x 10-6 Max. *1 Symbol Output frequency range Supply voltage Storage temperature Temperature range Operating temperature Frequency tolerance Current consumption Disable current Frequency control range Modulation characteristics Input resistance Frequency change polarity Symmetry High output voltage Low output voltage Output load condition(CMOS) Output enable / disable input voltage Rise time and Fall time Start-up time Frequency aging f0 VCC T_stg T_use f_tol ICC I_dis f_cont BW Rin SYM VOH VOL L_CMOS VIH VIL tr / tf t_str f_aging Remarks Store as bare product after unpacking No load condition OE=GND VC=2.5 V 2.0 V(**H ) , 1.65 V 1.50 V(**C ) 3 dB (at 1 kHz) DC level VC=0.5 V to 4.5 V(**H ),0.15 V to 3.15 V(**C ) CMOS load:50 % VCC level IOH= -4 mA IOL= 4 mA CMOS load OE Terminal CMOS load: 20 % VCC to 80 % VCC level Time at 90 % VCC to be 0 s +25 C, 10 years *1 50 MHz < f0 60 MHz : 15 x 10 Max. * Please keep VC pin open or ground while powering up VCC. -6 Frequency tolerance / Temperature range Frequency control range . Frequency tolerance 20 x 10-6 25 x 10-6 A B Temperature range -20 C to +70 C -40 C to +85 C Frequency control range 75 x 10-6 Min. 100 x 10-6 Min. K N External dimensions Output frequency range 41 MHz <f0 60 MHz 1 MHz f041 MHz Footprint (Recommended) (Unit:mm) (Unit:mm) 1.4 #5 #5 #4 #4 #6 1.1 #6 2.6 0.2 1.8 5.0 E 35.328 T C(ex. 0.01 F) #6 #5 #4 #3 #3 #2 2.54 #1 C 4.2 #2 0.2 7.0 5.08 1.4 0.1 #1 2.0 ANC181A 5.08 Note. OE Pin OE pin = "H" or "open" : Specified frequency output. OE pin = "L" : Output is high impedance. Pin map Pin 1 2 3 4 5 6 Connection F Type T Type VC N.C. OE GND OUT OE N.C. VCC Resist #1 #2 #3 5.08 To maintain stable operation, provide by-pass capacitor with more than 0.1 F at a location as near as possible to the power source terminal of the crystal products (between VCC - GND). http://www.epsontoyocom.co.jp