Actual size
http://www.epsontoyocom.co.jp
Crystal oscillator Epson Toyocom
S
p
ecifications
(
characteristics
)
Item Symbol Specifications Remarks
ANH / AKH / BNH / BKH ANC / AKC / BNC / BKC
Output frequency range f0 1.000 MHz to 60.000 MHz
Supply voltage VCC H:5.0 V
±
0.5 V C:3.3 V
±
0.3 V
Temperature
range Storage temperature T_stg -40 °C to +125 °C Store as bare product after unpacking
Operating temperature T_use As per below table
Frequency tolerance f_tol As per below table
Current consumption ICC 30 mA Max. 25 mA Max. No load condition
Disable current I_dis 15 mA Max. 12 mA Max. OE=GND
Frequency control range f_cont As per below table V C=2.5 V
±
2.0 V(**H ) , 1.65 V ±1.50 V(**C )
Modulation characteristics BW 20 kHz Min.
±
3 dB (at 1 kHz)
Input resistance Rin 5 M
Ω
Min. DC level
Frequency change polarity
-
Positive polarity VC=0.5 V to 4.5 V(**H ),0.15 V to 3.15 V(**C )
Symmetry SYM 40 % to 60 % CMOS load:50 % VCC level
High output voltage VOH VCC-0.4 V Min. IOH= -4 mA
Low output voltage VOL 0.4 V Max. IOL= 4 mA
Output load condition(CMOS) L_CMOS 15 pF Max. CMOS load
Output enable /
disable input voltage VIH 70 %VCC Min. OE Terminal
VIL 30 % VCC Max.
Rise time and Fall time tr / tf 4 ns Max. CMOS load: 20 % VCC to 80 % VCC level
Start-up time t_str 10 ms Max. Time at 90 % VCC to be 0 s
Frequency aging f_aging
±
10
×
10-6 Max. *1 +25 °C, 10 years
*1 50 MHz < f0 ≤ 60 MHz : ±15 × 10-6 Max.
*
Please keep VC pin open or ground while powering up VCC.
Frequency tolerance
/
Temperature range Frequency control range
. Frequency tolerance Temperature range Frequency control range Output frequency range
A ±20 × 10-6 -20 °C to +70 °C K ±75 × 10-6 Min. 41 MHz <f0≤ 60 MHz
B ±25 × 10-6 -40 °C to +85 °C N ±100 × 10-6 Min. 1 MHz ≤f0≤41 MHz
External dimensions
(
Unit:mm
)
Foot
p
rint
(
Recommended
)
(
Unit:mm
)
VOLTAGE -CONTROLLED CR YSTAL OSCILLATO R (VCXO)
VG - 1201CA
•Frequency range : 1 MHz to 60 MHz
•Supply voltage : 3.3 V(**C) or 5.0 V(**H)
•Function : Output enable(OE)
•External dimensions : 7.0 × 5.0 × 1.4 t (mm) Typ.
Note.
OE Pin
OE pin = "H" or "open" : Specified frequency output.
OE pin = "L" : Output is high impedance.
#1
#3 #2
#6
#4 1.4
2.6 1.1
#5
7.0±0.2
5.0±0.2
5.08
1.4±0.1
E 35.328 T
ANC181A
Pin map Connection
Pin F Type T T ype
1 VC
2 N.C. OE
3 GND
4 OUT
5 OE N.C.
6 VCC
#1 #2 #3
#4
#5
#6
5.08
2.54
Product Number (please contact us)
Q3603CA0xxxxx00
To maintain stable operation, provide by-pass capacitor with
more than 0.1 μF at a location as near as possible to the power
source terminal of the crystal products (between VCC - GND).
#5
#2
C
C(ex. 0.01 µF) 1.8
5.08
4.2 2.0
#1 #3
#4
#6
Resist
