Order this document by MC1458/D DUAL OPERATIONAL AMPLIFIERS (DUAL MC1741) The MC1458, C was designed for use as a summing amplifier, integrator, or amplifier with operating characteristics as a function of the external feedback components. * No Frequency Compensation Required * * * * SEMICONDUCTOR TECHNICAL DATA Short Circuit Protection Wide Common Mode and Differential Voltage Ranges Low Power Consumption 8 No Latch-Up 1 P1 SUFFIX PLASTIC PACKAGE CASE 626 MAXIMUM RATINGS (TA = +25C, unless otherwise noted.) Rating Symbol Value Unit Power Supply Voltage VCC VEE +18 -18 Vdc Input Differential Voltage VID 30 V Input Common Mode Voltage (Note 1) VICM 15 V Output Short Circuit Duration (Note 2) tSC Continuous Operating Ambient Temperature Range TA 0 to +70 C Tstg -55 to +125 C TJ 150 C Storage Temperature Range Junction Temperature 8 1 D SUFFIX PLASTIC PACKAGE CASE 751 (SO-8) NOTES: 1. For supply voltages less than 15 V, the absolute maximum input voltage is equal to the supply voltage. 2. Supply voltage equal to or less than 15 V. PIN CONNECTIONS Output A 1 2 Inputs A Representative Schematic Diagram VEE 3 4 - + A B- + 8 VCC 7 Output B 6 5 Inputs B VCC (Top View) 4.5 k Noninverting Input 25 39 k 30 pF 7.5 k Output Inverting Input 1.0 k 50 50 k 1.0 k 50 k ORDERING INFORMATION 50 Device VEE Motorola, Inc. 1996 Package SO-8 MC1458CD, D MC1458CP1, P1 MOTOROLA ANALOG IC DEVICE DATA Operating Temperature Range TA = 0 to +70C Plastic DIP Rev 1 1 MC1458, C ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = -15 V, TA = 25C, unless otherwise noted. (Note 3)) MC1458 Ch Characteristic i i MC1458C S b l Symbol Min Typ Max Min Typ Max U i Unit Input Offset Voltage (RS 10 k) VIO - 2.0 6.0 - 2.0 1.0 mV Input Offset Current IIO - 20 200 - 20 300 nA Input Bias Current IIB - 80 500 - 80 700 nA Input Resistance ri 0.3 2.0 - - 2.0 - M Input Capacitance Ci - 1.4 - - 1.4 - pF Offset Voltage Adjustment Range VIOR - 15 - - 15 - mV Common Mode Input Voltage Range VICR 12 13 - 11 13 - V Large Signal Voltage Gain (VO = 10 V, RL = 2.0 k) (VO = 10 V, RL = 10 k) AVOL 20 - 200 - - - - 20 - 200 - - V/mV ro - 75 - - 75 - Common Mode Rejection (RS 10 k) CMR 70 90 - 60 90 - dB Supply Voltage Rejection (RS 10 k) PSR - 30 150 - 30 - V/V 12 10 14 13 - - 11 9.0 14 13 - - Output Resistance Output Voltage Swing (RS 10 k) (RS 2.0 k) VO Output Short Circuit Current ISC - 20 - - 20 - mA Supply Currents (Both Amplifiers) ID - 2.3 5.6 - 2.3 8.0 mA Power Consumption PC - 70 170 - 70 240 mW tTLH os SR - - - 0.3 15 0.5 - - - - - - 0.3 15 0.5 - - - s % V/s Transient Response (Unity Gain) (VI = 20 mV, RL 2.0 k, CL 100 pF) Rise Time (VI = 20 mV, RL 2.0 k, CL 100 pF) Overshoot (VI = 10 V, RL 2.0 k, CL 100 pF) Slew Rate V ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = -15 V, TA = Thigh to Tlow, unless otherwise noted. (Note 3))* MC1458 Ch Characteristic i i MC1458C S b l Symbol Min Typ Max Min Typ Max U i Unit Input Offset Voltage (RS 10 k) VIO - - 7.5 - - 12 mV Input Offset Current (TA = 0 to +70C) IIO - - 300 - - 400 nA Input Bias Current (TA = 0 to +70C) IIB - - 800 - - 1000 nA Output Voltage Swing (Rs 10 k) (Rs 2 k) VO 12 10 14 13 - - - 9.0 - 13 - - 15 - - - - - - 15 - - - - Large Signal Voltage Gain (VO = 10 V, RL = 2 k) (VO = 10 V, RL = 10 k) *Tlow = 0C for MC1458, C NOTE: 2 V AVOL V/mV Thigh = +70C for MC1458, C 3. Input pins of an unused amplifier must be grounded for split supply operation or biased at least 3.0 V above VEE for single supply operation. MOTOROLA ANALOG IC DEVICE DATA MC1458, C Figure 1. Burst Noise versus Source Resistance Figure 2. RMS Noise versus Source Resistance 100 BW = 1.0 Hz to 1.0 kHz en, INPUT NOISE (peak) (V) en, INPUT NOISE (peak) (V) 1000 100 10 0 BW = 1.0 Hz to 1.0 kHz 10 1.0 0.1 10 100 1.0 k 10 k 100 k 1.0 M 10 100 RS, SOURCE RESISTANCE () 100 k 1.0 M Figure 4. Spectral Noise Density 140 en, INPUT NOISE ( nV/ Hz ) 10 en, OUTPUT NOISE (rms mV) 10 k RS, SOURCE RESISTANCE () Figure 3. Output Noise versus Source Resistance AV = 1000 1.0 100 10 0.1 0 1.0 1.0 10 100 1.0 k 10 k 100 k 120 AV = 10, RS = 100 k 100 80 60 40 20 0 1.0 M 10 100 1.0 k 10 k 100 k f, FREQUENCY (Hz) RS, SOURCE RESISTANCE () Figure 5. Burst Noise Test Circuit Positive Threshold Voltage 100 k + - - 100 k X 500 To Pass / Fail Indicator X2 + 1.0 k 100 k - Operational Amplifier Under Test Low Pass Filter 1.0 Hz to 1.0 kHz + Negative Threshold Voltage Unlike conventional peak reading or RMS meters, this system was especially designed to provide the quick response time essential to burst (popcorn) noise testing. MOTOROLA ANALOG IC DEVICE DATA The test time employed is 10 sec and the 20 V peak limit refers to the operational amplifier input thus eliminating errors in the closed loop gain factor of the operational amplifier . 3 MC1458, C Figure 7. Open Loop Frequency Response 28 120 24 100 A VOL , VOLTAGE GAIN (dB) VO, OUTPUT VOLTAGE (Vpp ) Figure 6. Power Bandwidth (Large Signal Swing versus Frequency) 20 16 12 (Voltage Follower) THD < 5% 8.0 4.0 80 60 40 20 0 -20 0 10 100 1.0 k f, FREQUENCY (Hz) 10 k 10 100 k VO , OUTPUT VOLTAGE SWING (V) 15 V Supplies 11 12 V 9.0 9.0 V 7.0 5.0 6.0 V 3.0 100 200 500 700 1.0 k 2.0 k 5.0 k 7.0 k 10 k 1.0 M 10 M 15 V Supplies -11 12 V -9.0 -7.0 9.0 V -5.0 6.0 V -3.0 -1.0 100 200 500 700 1.0 k 100 F 10 k 1.0 k +27 V +24 V 20 VCC Vin +21 V 16 5.0 k 7.0 k 10 k Figure 11. Single Supply Inverting Amplifier 28 +30 V Supply 24 2.0 k RL, LOAD RESISTANCE () Figure 10. Output Voltage Swing versus Load Resistance (Single Supply Operation) VO, OUTPUT VOLTAGE SWING (Vpp ) 100 k -13 RL, LOAD RESISTANCE () +18 V 200 k 12 +15 V 8.0 0 +9.0 V +6.0 V +5.0 V 1.0 2.0 50 k 2 200 k 3.0 4.0 5.0 6.0 7.0 RL, LOAD RESISTANCE (k) 8.0 9.0 7 - + 50 k +12 V 4.0 4 10 k -15 13 0 1.0 k Figure 9. Negative Output Voltage Swing versus Load Resistance 15 VO , OUTPUT VOLTAGE SWING (V) 100 f, FREQUENCY (Hz) Figure 8. Positive Output Voltage Swing versus Load Resistance 1.0 10 3 100 F MC1558 4 RL 10 MOTOROLA ANALOG IC DEVICE DATA MC1458, C Figure 12. Noninverting Pulse Response 5.0 V/DIV Output Input 10 s/DIV Figure 13. Transient Response Test Circuit Figure 14. Unused OpAmp To Scope (Input) - - To Scope (Output) + RL + CL Figure 15. Open Loop Voltage Gain versus Supply Voltage 105 AV , VOLTAGE GAIN (dB) 100 95 90 85 80 75 70 0 MOTOROLA ANALOG IC DEVICE DATA 2.0 4.0 6.0 8.0 10 12 14 16 VCC, |VEE|, SUPPLY VOLTAGES (V) 18 20 5 MC1458, C OUTLINE DIMENSIONS P1 SUFFIX PLASTIC PACKAGE CASE 626-05 ISSUE K 8 NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5 -B- 1 4 DIM A B C D F G H J K L M N F -A- NOTE 2 L C J -T- N SEATING PLANE D MILLIMETERS MIN MAX 9.40 10.16 6.10 6.60 3.94 4.45 0.38 0.51 1.02 1.78 2.54 BSC 0.76 1.27 0.20 0.30 2.92 3.43 7.62 BSC --- 10_ 0.76 1.01 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC --- 10_ 0.030 0.040 M K G H 0.13 (0.005) T A M B M M D SUFFIX PLASTIC PACKAGE CASE 751-05 (SO-8) ISSUE R D A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. C 8 5 0.25 H E M B M 1 4 h B e X 45 _ q A C SEATING PLANE L 0.10 A1 B 0.25 6 M C B S A S DIM A A1 B C D E e H h L q MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.18 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ MOTOROLA ANALOG IC DEVICE DATA MC1458, C Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MOTOROLA ANALOG IC DEVICE DATA 7 MC1458, C How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 8 *MC1458/D* MOTOROLA ANALOG IC DEVICE DATA MC1458/D