The Interconnect Solution Source 1 * ROW Connectors PC Card to Cable to Board: Cable to Cable WT-WT Examples: RIGHT-ANGLE PLUG: STRAIGHT PLUG: RECEPTACLE: PLUG RECEPTACLE SERIES WT WT = 1-row, straight-plug = 1-row, right-angle, plug WT WT = 1-row, straight, receptacle = 1-row, right-angle, receptacle NUMBER OF CONTACTS 3 through 22 3 through 22 TYPE OF CONTACTS PC PD7 PD9 PD11 PF3 PF6 PRD4 PRD7 PRD8 PW40 = Pin, straight, solder cup = Pin, straight, dip solder, .109 = Pin, straight, dip solder, .140 = Pin, straight, dip solder, .172 = Pin, straight, flex-circuit, .050 = Pin, straight, flex-circuit, .093 = Pin, right-angle, dip solder, .063 = Pin, right-angle, dip solder, .109 = Pin, right-angle, dip solder, .125 = Pin, straight, wire wrap, .625 SAC SAD7 SAD9 SAD11 SAD15 SAF3 SAF6 SAP SAR4 SAR7 SAR9 SARC SAW40 = Socket, straight, solder cup = Socket, straight, dip solder, .109 = Socket, straight, dip solder, .140 = Socket, straight, dip solder, .172 = Socket, straight, dip solder, .234 = Socket, straight, flex-circuit, .050 = Socket, straight, flex-circuit, .093 = Socket, straight, pin termination, .150, connector saver = Socket, right-angle, dip solder, .062 = Socket, right-angle, dip solder, .109 = Socket, right-angle, dip solder, .140 = Socket, right-angle, solder cup = Socket, straight, wire wrap, .625 TYPE OF HARDWARE No hardware for this series. Omit any hardware code letters. OPTIONS * The thin outboard barriers are often removed at the factory due to their fragile nature. * OPTION CODES: Add to the end of the part number. Example: WT10PC443-1 Call factory for additional codes. -443: Polarized Pin installed in contact position noted by dash number. See "Polarization" under next tab. -444: Contact position noted by dash number is left open (to mate with -443). See "Polarization" under next tab. -B82: Termination face sealed against conformal coating. -CD: Cross drilled connectors for hold down screws. See page W-8. -D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.) -D54: Combine B82 and D01 special codes. -G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate. "W" Series Connectors W-6 9916 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com WT WT WT 8 8 8 PRD7 PD9 SAC The Interconnect Solution Source WT-WT Dimensions Number of Contacts 4 6 8 10 12 14 16 18 20 Airborn, Inc. * 4321 Airborn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com A B .396 .596 .796 .996 1.196 1.396 1.596 1.796 1.996 .300 .500 .700 .900 1.100 1.300 1.500 1.700 1.900 "W" Series Connectors 9916 W-7 The Interconnect Solution Source WT CODE CHART WT DIMENSIONS SERIES SIZE 6 FOR CONTACT TYPE PC Pin, Solder Cup NO OF CONTACTS A DIM B DIM SERIES SIZE FOR CONTACT TYPE 2 .596 .100 6 SAC Socket, Solder Cup Closed Entry 8 SAD9 Socket, Dip Solder Closed Entry, .140 Ext. 10 SAD11 Socket, Dip Solder Closed Entry, .172 Ext. SAR7 Socket, Right-Angle Closed Entry, .109 Ext. PD9 Pin, Dip Solder .140 Extension WT 8 PD11 Pin, Dip Solder .172 Extension 4 .796 .300 10 PRD4 Pin, Right-Angle Dip Solder, .063 Ext. 6 .996 .500 12 PRD7 Pin, Right-Angle, Dip Solder, .109 Ext. 8 1.196 .700 12 14 PRD8 Pin, RIght-Angle, Dip Solder, .125 Ext. 10 1.396 .900 14 16 12 1.596 1.100 16 18 14 1.796 1.300 18 20 16 1.996 1.500 20 "W" Series Connectors W-8 WT AirBorn, Inc. * 4321 AirBorn Drive * Addison, TX 75001-0519 Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com 0018