ALUMINUM ELECTROLYTIC CAPACITORS UV 6mmL Chip Type, Long Life Assurance series Chip type with load life of 5000 hours at +105C. Designed for surface mounting on high density PC board. Applicable to automatic insertion machine using carrier tape. UT UV Long Life Specifications Item Performance Characteristics Category Temperature Range - 40 ~ +105C Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 100F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20C tan 4 0.37 Rated voltage (V) tan (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz 4 8 14 Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 6.3 4 10 16 2 5 25 2 3 Capacitance change tan After 5000 hours' application of rated voltage at 105C , capacitors meet the characteristic requirements listed at right. Endurance 10 3 7 35 2 3 50 2 3 Within 30% of initial value 300% or less of initial specified value Initial specified value or less Leakage current After leaving capacitors under no load at 105C for 1000 hours, they meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C Capacitance change for 30 seconds. After removing from the hot plate and restored tan at room temperature, they meet the characteristic requirements Leakage current listed at right. Shelf Life Resistance to soldering heat Within 10% of initial value Initial specified value or less Initial specified value or less Black print on the case top. Marking Type numbering system (Example : 16V 10F) Chip Type Positive Capacitance Plastic platform 0.3MAX. Voltage 2 3 4 5 6 7 8 9 10 11 12 13 14 UUV 1 C 1 0 0 M FR1 GS (mm) A0.2 D A0.2 E A B C E L 4 1.8 4.3 4.3 1.0 5.8 5 2.1 5.3 5.3 1.3 5.8 Taping code 6.3 2.4 6.6 6.6 2.2 5.8 Configuration Capacitance tolerance (20%) Rated Capacitance (10F) Rated voltage (16V) Negative 0.5 ~ 0.8 L0.3 Voltage mark for 6.3V is C0.2 B0.2 X2P 10 16V D0.5 Lot No. 1 0.5MAX. 105C Marking Series name Type 6V . * The lead-free product is also available upon request. In this case, CL will be put at 10th and 11th digit of type numbering system. Dimensions Cap.(F) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 4 0G V Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 4 5 5 6.3 6.3 0J 22 30 36 60 4 5 5 6.3 10 1A 22 30 36 60 5 5 6.3 16 1C 27 35 46 4 5 6.3 6.3 25 1E 18 30 40 50 4 5 6.3 6.3 35 1V 13 23 38 48 4 5 6.3 50 1H 15 25 42 4 4 4 4 4 4 4 5 6.3 1.0 2.6 3.2 3.8 6.2 11 14 19 30 Case size Rated Allowable ripple ripple Rated Ripple (mA rms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping Specifications are given in page 22. Please refer to page 3 for the minimum order quantity. CAT.8100S