DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PE_L series 5%, 1%, 0.5%, 0.1% sizes 0201/0402/ 0603/ 0805/ 1206/ 2010/ 2512 Product specification - September 8, 2020 V.9 RoHS compliant & Halogen free Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 2 12 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes PE series current sensor - low TCR with lead-free terminations made by metal film with ceramic substrate. Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. APPLICATIONS Consumer goods Computer Telecom / Datacom Industrial / Power supply Automotive Alternative Energy FEATURES AEC-Q200 qualified Halogen-free Epoxy RoHS compliant Reduce environmentally hazardous wastes High component and equipment reliability None forbidden-materials used in products/production Low resistances applied to current sensing GLOBAL PART NUMBER PE XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0201/ 0402/ 0603/ 0805/ 1206/ 2010/ 2512 (2) TOLERANCE B = 0.1% (only for 0805, > 50m) D = 0.5% ( 10m) F = 1% J = 5% (3) PACKAGING TYPE R = Paper/ PE taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE E = 50 ppm/C M = 75 ppm/C F = 100 ppm/C J = 350 ppm/C (5) TAPING REEL 07 / 7W / 7T / 47 / 57= 7 inch dia. Reel and specific rated power. Detailed power rating are shown in the Table 2. (6) RESISTANCE VALUE 5 m to 910 m There are 3~5 digits indicated the resistance value. Letter R is decimal point. Detailed coding rules of resistance are shown in the table of "Resistance rule of global part number". (7) DEFAULT CODE Letter L is the system default code for ordering only. (Note) Resistance rule of global part number Resistance code rule Example 0R001 = 1 m 0RXXX (1 to 910 m) 0R1 = 100 m ORDERING EXAMPLE The ordering code of a PE2512 1W chip resistor, value 0.1 with 1% tolerance, supplied in 7-inch tape reel is: PE2512FKM070R1L 0R91 = 910 m NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead-Free Process" www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 3 12 MARKING PE0201 / PE0402 No marking YNSC123_1 Fig. 1 PE0603 5m R 50m 51m R 99m 100m R 910m 10 51 100 YNSC140 YNSC145 YNSC144 Fig. 2 Value = 10 m Value = 51 m Value = 100 m 2 digits resistance range: 5m R 99m 3 digits resistance range: 100m R 910m PE0805 5m R 50m 51m R 910m 3 digits 051 010 YNSC138 YNSC145 Fig. 3 Value = 10 m Value = 51 m PE1206 5m R 50m 51m R 910m R010 R051 YNSC146 YNSC139 Fig. 4 Value = 10 m Value = 51 m 4 digits The "R" is used as a decimal point; the other 3 digits are significant. PE2010 / PE2512 5m R 100m 100m < R 910m R510 R010 YNSC158 YNSC139 Fig. 5 Value = 10 m Value = 510 m 4 digits The "R" is used as a decimal point; the other 3 digits are significant. Outlines For dimensions, please refer to Table 1 5m R 50m R010 51m R 910m R051 YNSC143 Fig. 5 Chip resistor outlines www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 4 12 DIMENSION Table 1 For outlines, please refer to Fig. 4 TYPE RESISTANCE RANGE PE0201 PE0402 PE0603 PE0805 PE1206 PE2010 PE2512 L (mm) W (mm) H (mm) I1 (mm) 50 m R 910 m 0.60 0.03 0.31 0.04 0.27 0.04 0.14 0.06 10 m R 910 m 1.00+0.10/-0.15 0.50+0.10/-0.15 0.35 0.15 0.25 0.10 5 m R 50 m 1.60 0.20 0.76 0.25 0.35 0.25 0.38 0.25 51 m R 910 m 1.52 0.25 0.76 0.25 0.45 0.10 0.38 0.25 5 m R 6 m 2.03 0.25 1.27 0.25 0.35 0.25 0.73 0.25 7 m R 50 m 2.03 0.25 1.27 0.25 0.35 0.25 0.38 0.25 51 m R 910 m 2.03 0.25 1.27 0.25 0.55 0.10 0.35 0.20 5 m 3.20 0.25 1.60 0.25 0.64 0.25 0.64 0.25 6 m R 910 m 3.20 0.25 1.60 0.25 0.64 0.25 0.51 0.25 5 m R 6 m 5.08 0.25 2.54 0.25 0.64 0.25 1.47 0.25 7 m R 910 m 5.08 0.25 2.54 0.25 0.64 0.25 0.51 0.25 6 m R 910 m 6.35 0.25 3.18 0.25 0.64 0.25 0.76 0.25 Note: 1. For relevant physical dimensions, please refer to construction outlines. 2. Please contact with sales offices, distributors and representatives in your region before ordering. www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 5 12 ELECTRICAL CHARACTERISTICS Table 2 POWER RATING (1) SERIES SIZE 07 7W 0201 1/20W 1/10W Fig. 4 Chip outlines 0402resistor 1/16W 1/8W 0603 PE 0805 RESISTANCE RANGE TOLERANCE TEMPERATURE COEFFICIENT OF RESISTANCE 7T 47 57 --- --- --- 50 m R 910 m 50 m R 70 m 350 ppm/C 70 m < R 910 m 100 ppm/C --- 10 m R 910 m 100 ppm/C 5 m R 910 m 75 ppm/C 100 ppm/C 1/6W 1/4W 1/10W 1/5W 1/3W 2/5W 1/2W 0.1% (only for 0805, >50m) 1/8W 1/4W 1/3W 1/2W --- 0.5%(10 m) 5 m R 19 m 75 ppm/C, 100 ppm/C 20 m R 910 m 50 ppm/C, 75 ppm/C, 100 ppm/C --- 5 m R 910 m --- 6 m R 910 m 50 ppm/C 75 ppm/C 100 ppm/C 1206 1/4W 1/2W --- 1W --- 2010 1/2W 1W --- --- 2512 1W 2W --- --- 1% 5% Note: 1. Global part number (code 10 - 11) 2. Please contact with sales offices, distributors and representatives in your region before ordering. FUNCTIONAL DESCRIPTION OPERATING TEMPERATURE RANGE PE0201 to PE0402 Range: -55C to +125C (Fig. 6-1) PE0603 to PE2512 Range: -55C to +170C (Fig. 6-2) handbook, P halfpage MLB206 max (%Prated) 100 POWER RATING Standard rated power at 70C: PE0201 = 1/20W PE0402 = 1/16W PE0603 = 1/10W PE0805 = 1/8W PE1206 = 1/4W PE2010 = 1/2W PE2512 = 1W For detail power value, please refer to Table 2. 50 0 55 Fig. 6-1 0 50 70 100 125 o Tamb ( C) Maximum dissipation (P max ) in percentage of rated power as a function of the operating ambient temperature (T amb ) RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= MRA633 P (%Prated) 100 (PxR ) Where 50 V = Continuous rated DC or AC (rms) working voltage (V) 0 55 P = Rated power (W) R = Resistance value () Fig. 6-2 0 50 70 100 170 Tamb ( C) Maximum dissipation (P max ) in percentage of rated power as a function of the operating ambient temperature (T amb ) www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 6 12 PULSE LOAD BEHAVIOR PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION PE0201 PE0402 PE0603 PE0805 PE1206 PE2010 PE2512 Paper/PE taping reel (R) 7" (178 mm) 10,000 10,000 5,000 5,000 4,000 --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- --- 4,000 4,000 PAPER/PE TAPE P0 T D0 P2 E F cover tape W B0 A0 P1 MBG251 Fig. 7 Paper/PE Tape www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount SERIES PE_L 7 12 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 Table 4 Dimensions of Paper/PE tape for relevant chip resistors size Unit: mm SYMBOL SIZE A0 B0 W E F P0 P1 P2 O D0 T PE0201 0.41 0.10 0.70 0.10 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 2.00 0.05 2.00 0.05 1.50 0.10 0.40 0.10 PE0402 0.65 0.10 1.15 0.10 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 2.00 0.05 2.00 0.05 1.50 0.10 0.53 0.10 PE0603 1.20 0.15 1.90 0.15 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 0.55 0.15 PE0805 1.60 0.15 2.30 0.15 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 0.85 0.15 PE1206 1.90 0.10 3.50 0.10 8.00 0.30 1.75 0.10 3.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 0.85 0.15 EMBOSSED TAPE P0 D0 P2 E F cover tape W B0 MBG516_b A0 T D1 P1 direction of unreeling Fig. 8 Embossed Tape Table 5 Dimensions of embossed tape for relevant chip resistors size SIZE SYMBOL A0 Unit: mm B0 W E F P0 P1 P2 O D0 O D1 T PE2010 3.00 0.15 5.60 0.15 12.10 0.30 1.75 0.10 5.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 1.50 0.10 0.80 0.15 PE2512 3.40 0.15 6.70 0.15 12.10 0.30 1.75 0.10 5.50 0.10 4.00 0.10 4.00 0.10 2.00 0.10 1.50 0.10 1.50 0.10 0.80 0.15 www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 8 12 REEL SPECIFICATION W2 D C N A Fig. 9 Reel HBK039_a W1 Table 6 Dimensions of reel specification for relevant chip resistors size QUANTITY PER REEL SIZE REEL SIZE 8 mm TAPE WIDE 7" PE0201 10,000 PE0402 10,000 PE0603 5000 PE0805 5000 PE1206 4000 PE2010 4000 -- PE2512 4000 -- (O 178 mm) 7" (O 178 mm) 7" (O 178 mm) 7" (O 178 mm) 7" (O 178 mm) SYMBOL Unit: mm 12 mm TAPE WIDE 24 mm TAPE WIDE --- --- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 9.0 0.30 12.4 --- --- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 9.0 0.30 12.4 -- -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 8.4 +1/-0 12.4 -- -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 8.4 +1/-0 12.4 -- -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 8.4 +1/-0 12.4 -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 12.3 +1/-0 18.4 -- 180.0+0/-3 60.0+1/-0 13.0 0.2 21.0 0.8 12.3 +1/-0 18.4 7" (O 178 mm) 7" (O 178 mm) A N C D W1 W2 MAX. LEADER/TRAILER TAPE SPECIFICATION leader end handbook, full pagewidth empty compartments with cover tape (min. 240 mm) trailer end trailer (max. 260 mm) cover tape only leader 400 mm CCB325 Fig.10 Leader/Trailer Tape www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 9 12 FOOTPRINT AND SOLDERING PROFILES For recommended soldering profiles, please refer to data sheet "Chip resistors mounting". FOOTPRINT Fig. 11 Single resistor chips recommended dimensions of footprints Table 7 Footprint dimensions SIZE RESISTANCE RANGE PE0201 Unit: mm A B C D 50 m R 910 m 1.00 0.30 0.35 0.40 PE0402 10 m R 910 m 1.45 0.35 0.55 0.55 PE0603 5 m R 910 m 2.52 0.50 1.01 1.01 PE0805 5 m R 910 m 2.54 0.50 1.02 1.27 PE1206 5 m R 910 m 3.90 0.76 1.57 1.78 5 m R 6 m 6.12 1.40 2.36 3.05 7 m R 910 m 6.10 3.30 1.40 3.05 6 m 7.40 3.18 2.11 3.68 7 m R 910 m 7.36 4.06 1.65 3.68 PE2010 PE2512 www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 10 12 TESTS AND REQUIREMENTS Table 8 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE Life/ Operational Life/ Endurance MIL-STD-202G-method 108 1,000 hours at 70 2 C applied RCWV 1.5 hours on, 0.5 hour off, still air required High Temperature Exposure/ Endurance at Upper Category Temperature MIL-STD-202G-method 108 IEC 60115-1 4.25.1 IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered REQUIREMENTS (1%+0.0005 ) (1%+0.0005 ) No direct impingement of forced air to the parts Tolerances: 0201/0402 125 3 0603 and above 170 3 Moisture Resistance MIL-STD-202G-method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered 0201: (5%+0.0005 ) Others: (0.5%+0.0005 ) Parts mounted on test-boards, without condensation on parts Measurement at 24 2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107 -55/+125 C (1%+0.0005 ) Note: Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air Short Time Overload IEC60115-1 4.13 Board Flex/ Bending IEC60115-1 4.33 5 times of rated power for 5 seconds at room temperature (1%+0.0005 ) Device mounted on PCB test board as described, only 1 board bending required (1%+0.0005 ) No visible damage No visible damage Bending for 0201: 3mm 0402 and above: 2mm Holding time: minimum 60 seconds Biased Humidity MIL-STD-202 Method 103 1,000 hours at 85C/85%R.H. 10% of operating power, no condensation on the devices, circulating air. 0201: (5%+0.0005 ) Others : (1.0%+0.0005 ) www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 11 12 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDEC Electrical Test not required Well tinned (95% covered) J-STD-002B test B Magnification 50X No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 245 3 C Dipping time: 3 0.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDEC Leadfree solder, 260 C, 30 seconds immersion time No visible damage J-STD-002B test D MIL-STD-202G-method 210F Condition B, no pre-heat of samples (0.5%+0.0005 ) IEC 60115-1 4.18 Leadfree solder, 260 C, 10 seconds immersion time No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Sep. 08, 2020 V.9 Product specification Chip Resistor Surface Mount PE_L SERIES 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 12 12 REVISION HISTORY REVISION DATE TYPE Version 9 Sep. 1, 2020 0603 Version 80805 Jun. 11, 2020 1206 CHANGE NOTIFICATION POWER - DESCRIPTION TOLERANCE 1/8W, 1/4W, 1/3W, 1/2W 1/4W, 1/2W 1/2W, 1W - are constructed Jan. 21, The2019 resistors 5 m R < 100 m Mar. 04, 2015 2512 Version 0 Feb. 10, 2015 4527 - Update the dimension for PE0805 5mohm 4 m R < 100 m & 6mohm - Update the marking for PE0603 3 m R < 100 m - Extend resistance range for PE0201 - Extended resistor value for PE2010 and 2512 using outstanding TCR level material, which makes Yageo PF Version 6 Oct.resistors 22, 2018 excellent for current sensing application in battery charger circuit & DC-DC Version 5 Novconverter. 23, 2016 The composition of the resistive material is adjusted to give the PF Version 42010 Dec. 21, 2015 approximate required resistance and is covered with a protective coating, which printed with the Version 3 Aug. 06, 2015 resistance value. Finally, the three external terminations (Ni / matte Tin) are Version 2 Apr. 20, 2015 added, as shown in Fig. 4. Version 1 - - Extend resistor value for PE0603 and 0805, and 0.1% tol for 0805 > 50m - Add in pulse load behavior - Extend resistor value for 0.5% 1% 5 m R < 100 m 2% - Update resistance value 5% 75 ppm/C - Update 0603 to 1206 TCR - Extend resistor value - Update TCR and operating temperature 1 m R < 100 m 1W, 2W - TEMPERATURE COEFFICIENT OF RESISTANCE - Update dimensions of tape for PE0201 and PE1206 1/10W, 1/5W, 3/10W, 2/5W, 1/2W Version 7 RESISTANCE RANGE 3W 2W, 3W, 5W 1 m sensor R 50 mTCR PE series sizes of - New datasheet for current - low 0201/0402/0603/0805/1206/2010/2512, 0.5%, 1%, and 5% 6 m R < 1 NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Sep. 08, 2020 V.9