DATA SHEET
CURRENT SENSOR - LOW TCR
AUTOMOTIVE GRADE
PE_L series
5%, 1%, 0.5%, 0.1%
sizes
0201/0402/ 0603/ 0805/ 1206/ 2010/ 2512
RoHS compliant & Halogen free
Product specification – September 8, 2020 V.9
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
2
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
SCOPE
This specification describes PE
series current sensor - low TCR
with lead-free terminations made by
metal film with ceramic substrate.
APPLICATIONS
Consumer goods
Computer
Telecom / Datacom
Industrial / Power supply
Automotive
Alternative Energy
FEATURES
AEC-Q200 qualified
Halogen-free Epoxy
RoHS compliant
Reduce environmentally
hazardous wastes
High component and equipment
reliability
None forbidden-materials used
in products/production
Low resistances applied to
current sensing
GLOBAL PART NUMBER
PE XXXX X X X XX XXXX L
(1) (2) (3) (4) (5) (6) (7)
(1) SIZE
0201/ 0402/ 0603/ 0805/ 1206/ 2010/ 2512
(2) TOLERANCE
B = ± 0.1% (only for 0805, > 50mΩ)
D = ± 0.5% ( ≥10mΩ)
F = ± 1%
J = ± 5%
(3) PACKAGING TYPE
R = Paper/ PE taping reel
K = Embossed taping reel
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
E = ± 50 ppm/°C
M = ± 75 ppm/°C
F = ± 100 ppm/°C
J = ± 350 ppm/°C
(5) TAPING REEL
07 / 7W / 7T / 47 / 57= 7 inch dia. Reel and specific rated power.
Detailed power rating are shown in the Table 2.
(6) RESISTANCE VALUE
5 mΩ to 910 mΩ
There are 3~5 digits indicated the resistance value. Letter R is decimal point.
Detailed coding rules of resistance are shown in the table of “Resistance rule of
global part number”.
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
ORDERING INFORMATION - GLOBAL PART NUMBER
Global part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
ORDERING EXAMPLE
The ordering code of a PE2512
1W chip resistor, value 0.1 Ω with
±1% tolerance, supplied in 7-inch
tape reel is: PE2512FKM070R1L
Resistance rule of global part
number
Resistance code rule
Example
0RXXX
(1 to 910 mΩ)
0R001 = 1 mΩ
0R1 = 100 mΩ
0R91 = 910 mΩ
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions
"Lead-Free Process"
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
3
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
MARKING
PE0201 / PE0402
No marking
PE0603
2 digits
resistance range: 5mΩ ≤ R ≤ 99mΩ
3 digits
resistance range: 100mΩ ≤ R ≤ 910mΩ
PE0805
3 digits
PE1206
4 digits
The “R” is used as a decimal point; the other 3 digits are
significant.
PE2010 / PE2512
4 digits
The “R” is used as a decimal point; the other 3 digits are
significant.
PF s
5mΩ ≤ R ≤ 100mΩ
Fig. 5 Value = 10 mΩ
YNSC139
R010
eries
Note: construction will be
adjusted to resistance value
(only for PF series).
Fig. 1
YNSC123_1
YNSC143
R010
R051
Fig. 5 Chip resistor outlines
O
Ou
ut
tl
li
in
ne
es
s
For dimensions, please refer to Table 1
5mΩ ≤ R ≤ 50mΩ
YNSC145
051
51mΩ ≤ R ≤ 910mΩ
Value = 51 mΩ
5mΩ ≤ R ≤ 50mΩ
Fig. 3 Value = 10 mΩ
YNSC138
010
YNSC146
R051
51mΩ ≤ R ≤ 910mΩ
Value = 51 mΩ
5mΩ ≤ R ≤ 50mΩ
Fig. 4 Value = 10 mΩ
YNSC139
R010
51mΩ ≤ R ≤ 910mΩ
5mΩ ≤ R ≤ 100mΩ
Fig. 5 Value = 10 mΩ
YNSC139
R010
YNSC145
100
100mΩ ≤ R ≤ 910mΩ
Value = 100 mΩ
YNSC144
51
51mΩ ≤ R ≤ 99mΩ
Value = 51 mΩ
5mΩ ≤ R ≤ 50mΩ
Fig. 2 Value = 10 mΩ
YNSC140
10
YNSC158
R510
100mΩ < R ≤ 910mΩ
Value = 510 mΩ
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
4
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
TYPE
RESISTANCE RANGE
L (mm)
W (mm)
H (mm)
I1 (mm)
PE0201
50 mΩ ≤ R ≤ 910 mΩ
0.60± 0.03
0.31± 0.04
0.27± 0.04
0.14± 0.06
PE0402
10 mΩ ≤ R ≤ 910 mΩ
1.00+0.10/-0.15
0.50+0.10/-0.15
0.35± 0.15
0.25± 0.10
PE0603
5 mΩ ≤ R ≤ 50 mΩ
1.60± 0.20
0.76± 0.25
0.35± 0.25
0.38± 0.25
51 mΩ ≤ R ≤ 910 mΩ
1.52± 0.25
0.76± 0.25
0.45± 0.10
0.38±0.25
PE0805
5 mΩ ≤ R ≤ 6 mΩ
2.03± 0.25
1.27± 0.25
0.35± 0.25
0.73± 0.25
7 mΩ ≤ R ≤ 50 mΩ
2.03± 0.25
1.27± 0.25
0.35± 0.25
0.38± 0.25
51 mΩ ≤ R ≤ 910 mΩ
2.03± 0.25
1.27± 0.25
0.55± 0.10
0.35± 0.20
PE1206
5 mΩ
3.20± 0.25
1.60± 0.25
0.64± 0.25
0.64± 0.25
6 mΩ ≤ R ≤ 910 mΩ
3.20± 0.25
1.60± 0.25
0.64± 0.25
0.51± 0.25
PE2010
5 mΩ ≤ R ≤ 6 mΩ
5.08± 0.25
2.54± 0.25
0.64± 0.25
1.47± 0.25
7 mΩ ≤ R ≤ 910 mΩ
5.08± 0.25
2.54± 0.25
0.64± 0.25
0.51± 0.25
PE2512
6 mΩ ≤ R ≤ 910 mΩ
6.35± 0.25
3.18± 0.25
0.64± 0.25
0.76± 0.25
Note:
1. For relevant physical dimensions, please refer to construction outlines.
2. Please contact with sales offices, distributors and representatives in your region before ordering.
DIMENSION
Table 1 For outlines, please refer to Fig. 4
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
5
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
SERIES
SIZE
POWER RATING (1)
TOLERANCE
RESISTANCE
RANGE
TEMPERATURE COEFFICIENT
OF RESISTANCE
07
7W
7T
47
57
PE
0201
1/20W
1/10W
---
---
---
± 0.1% (only for
0805, >50mΩ)
± 0.5%(≥10 mΩ)
±1%
±5%
50 mΩ ≤ R ≤ 910 mΩ
50 mΩ ≤ R ≤ 70 mΩ ± 350 ppm/°C
70 mΩ < R ≤ 910 mΩ ± 100 ppm/°C
0402
1/16W
1/8W
1/6W
1/4W
---
10 mΩ ≤ R ≤ 910 mΩ
± 100 ppm/°C
0603
1/10W
1/5W
1/3W
2/5W
1/2W
5 mΩ ≤ R ≤ 910 mΩ
± 75 ppm/°C
± 100 ppm/°C
0805
1/8W
1/4W
1/3W
1/2W
---
1206
1/4W
1/2W
---
1W
---
5 mΩ ≤ R ≤ 19 mΩ
20 mΩ ≤ R ≤ 910 mΩ
±75 ppm/°C, ± 100 ppm/°C
±50 ppm/°C, ±75 ppm/°C, ±100 ppm/°C
2010
1/2W
1W
---
---
---
5 mΩ ≤ R ≤ 910 mΩ
± 50 ppm/°C
± 75 ppm/°C
± 100 ppm/°C
2512
1W
2W
---
---
---
6 mΩ ≤ R ≤ 910 mΩ
Note: 1. Global part number (code 10 - 11)
2. Please contact with sales offices, distributors and representatives in your region before ordering.
ELECTRICAL CHARACTERISTICS
Fig. 4 Chip resistor outlines
Table 2
FUNCTIONAL DESCRIPTION
O
OP
PE
ER
RA
AT
TI
IN
NG
G
T
TE
EM
MP
PE
ER
RA
AT
TU
UR
RE
E
R
RA
AN
NG
GE
E
PE0201 to PE0402 Range: -55°C to +125°C (Fig. 6-1)
PE0603 to PE2512 Range: -55°C to +170°C (Fig. 6-2)
P
PO
OW
WE
ER
R
R
RA
AT
TI
IN
NG
G
Standard rated power at 70°C:
PE0201 = 1/20W
PE0402 = 1/16W
PE0603 = 1/10W
PE0805 = 1/8W
PE1206 = 1/4W
PE2010 = 1/2W
PE2512 = 1W
For detail power value, please refer to Table 2.
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V =
)(PxR
Where
V = Continuous rated DC or
AC (rms) working voltage (V)
P = Rated power (W)
R = Resistance value (Ω)
handbook, halfpage MLB206
70 10055 50 Tamb( C)
o
(%P )
rated
00
50
100
125
Pmax
Fig. 6-1 Maximum dissipation (Pmax) in percentage of rated
power as a function of the operating ambient
temperature (Tamb)
MRA633
70 100
55 50 Tamb (C)
(%Prated)
00
50
100
170
P
Fig. 6-2 Maximum dissipation (Pmax) in percentage of rated
power as a function of the operating ambient
temperature (Tamb)
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
6
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
PULSE LOAD BEHAVIOR
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL DIMENSION
PE0201
PE0402
PE0603
PE0805
PE1206
PE2010
PE2512
Paper/PE taping reel (R)
7" (178 mm)
10,000
10,000
5,000
5,000
4,000
---
---
Embossed taping reel (K)
7" (178 mm)
---
---
---
---
---
4,000
4,000
PAPER/PE TAPE
MBG251
E
FW
P2
P0
P1
D0
B0
A0
T
cover tape
Fig. 7 Paper/PE Tape
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
7
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
Table 4 Dimensions of Paper/PE tape for relevant chip resistors size
SIZE
SYMBOL
Unit: mm
A0
B0
W
E
F
P0
P1
P2
Ø D0
T
PE0201
0.41± 0.10
0.70± 0.10
8.00± 0.30
1.75± 0.10
3.50± 0.10
4.00± 0.10
2.00± 0.05
2.00± 0.05
1.50± 0.10
0.40± 0.10
PE0402
0.65± 0.10
1.15± 0.10
8.00± 0.30
1.75± 0.10
3.50± 0.10
4.00± 0.10
2.00± 0.05
2.00± 0.05
1.50± 0.10
0.53± 0.10
PE0603
1.20± 0.15
1.90± 0.15
8.00± 0.30
1.75± 0.10
3.50± 0.10
4.00± 0.10
4.00± 0.10
2.00± 0.10
1.50± 0.10
0.55± 0.15
PE0805
1.60± 0.15
2.30± 0.15
8.00± 0.30
1.75± 0.10
3.50± 0.10
4.00± 0.10
4.00± 0.10
2.00± 0.10
1.50± 0.10
0.85± 0.15
PE1206
1.90± 0.10
3.50± 0.10
8.00± 0.30
1.75± 0.10
3.50± 0.10
4.00± 0.10
4.00± 0.10
2.00± 0.10
1.50± 0.10
0.85± 0.15
Table 5 Dimensions of embossed tape for relevant chip resistors size
SIZE
SYMBOL
Unit: mm
A0
B0
W
E
F
P0
P1
P2
Ø D0
Ø D1
T
PE2010
3.00± 0.15
5.60± 0.15
12.10± 0.30
1.75± 0.10
5.50± 0.10
4.00± 0.10
4.00± 0.10
2.00± 0.10
1.50± 0.10
1.50± 0.10
0.80± 0.15
PE2512
3.40± 0.15
6.70± 0.15
12.10± 0.30
1.75± 0.10
5.50± 0.10
4.00± 0.10
4.00± 0.10
2.00± 0.10
1.50± 0.10
1.50± 0.10
0.80± 0.15
MBG516_b
E
FW
P2
P0
D0
B0
A0D1
P1
direction of unreeling
cover tape
T
Fig. 8 Embossed Tape
EMBOSSED TAPE
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
8
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
NC
DA
W1
W2
HBK039_a
Fig. 9 Reel
REEL SPECIFICATION
SIZE
QUANTITY
PER REEL
REEL SIZE
SYMBOL
Unit: mm
8 mm
TAPE WIDE
12 mm
TAPE WIDE
24 mm
TAPE WIDE
A
N
C
D
W1
W2 MAX.
PE0201
10,000
7"
(Ø 178 mm)
---
---
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
9.0± 0.30
12.4
PE0402
10,000
7"
(Ø 178 mm)
---
---
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
9.0± 0.30
12.4
PE0603
5000
7"
(Ø 178 mm)
--
--
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
8.4 +1/-0
12.4
PE0805
5000
7"
(Ø 178 mm)
--
--
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
8.4 +1/-0
12.4
PE1206
4000
7"
(Ø 178 mm)
--
--
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
8.4 +1/-0
12.4
PE2010
4000
--
7"
(Ø 178 mm)
--
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
12.3 +1/-0
18.4
PE2512
4000
--
7"
(Ø 178 mm)
--
180.0+0/-3
60.0+1/-0
13.0± 0.2
21.0± 0.8
12.3 +1/-0
18.4
Table 6 Dimensions of reel specification for relevant chip resistors size
LEADER/TRAILER TAPE SPECIFICATION
CCB325
empty compartments
with cover tape
(min. 240 mm) cover tape only
leader 400 mm
trailer (max. 260 mm)
trailer end
leader end
handbook, full pagewidth
Fig.10 Leader/Trailer Tape
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
9
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
FOOTPRINT AND SOLDERING PROFILES
For recommended soldering profiles, please refer to data sheet “Chip resistors mounting”.
Fig. 11 Single resistor chips recommended dimensions of footprints
FOOTPRINT
SIZE
RESISTANCE RANGE
Unit: mm
A
B
C
D
PE0201
50 mΩ ≤ R ≤ 910 mΩ
1 . 00
0 . 30
0 . 35
0 . 40
PE0402
10 mΩ ≤ R ≤ 910 mΩ
1 . 45
0 . 35
0 . 55
0 . 55
PE0603
5 mΩ ≤ R ≤ 910 mΩ
2 . 52
0.50
1 . 01
1 . 01
PE0805
5 mΩ ≤ R ≤ 910 mΩ
2 . 54
0 . 50
1 . 02
1 . 27
PE1206
5 mΩ ≤ R ≤ 910 mΩ
3 . 90
0 . 76
1 . 57
1 . 78
PE2010
5 mΩ ≤ R ≤ 6 mΩ
6 . 12
1 . 40
2 . 36
3 . 05
7 mΩ ≤ R ≤ 910 mΩ
6 . 10
3 . 30
1 . 40
3 . 05
PE2512
6 mΩ
7 . 40
3 . 18
2 . 11
3 . 68
7 mΩ ≤ R ≤ 910 mΩ
7 . 36
4 . 06
1 . 65
3 . 68
Table 7 Footprint dimensions
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
10
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
TESTS AND REQUIREMENTS
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Life/
Operational Life/
Endurance
MIL-STD-202G-method 108
IEC 60115-1 4.25.1
1,000 hours at 70± 2 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
± (1%+0.0005 Ω)
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
MIL-STD-202G-method 108
IEC 60115-1 4.25.3
1,000 hours at maximum operating temperature
depending on specification, unpowered
No direct impingement of forced air to the parts
Tolerances:
0201/0402 125± 3℃
0603 and above 170± 3℃
± (1%+0.0005 Ω)
Moisture
Resistance
MIL-STD-202G-method 106
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24± 2 hours after
test conclusion
0201: ± (5%+0.0005 Ω)
Others: ± (0.5%+0.0005 Ω)
Thermal Shock
MIL-STD-202G-method 107
-55/+125 °C
Note: Number of cycles required is 300.
Devices mounted
Maximum transfer time is 20 seconds.
Dwell time is 15 minutes. Air – Air
±(1%+0.0005 Ω)
Short Time
Overload
IEC60115-1 4.13
5 times of rated power for 5 seconds at room
temperature
± (1%+0.0005 Ω)
No visible damage
Board Flex/
Bending
IEC60115-1 4.33
Device mounted on PCB test board as described,
only 1 board bending required
Bending for
0201: 3mm
0402 and above: 2mm
Holding time: minimum 60 seconds
± (1%+0.0005 Ω)
No visible damage
Biased Humidity
MIL-STD-202
Method 103
1,000 hours at 85ºC/85%R.H. 10% of operating
power, no condensation on the devices, circulating
air.
0201: ± (5%+0.0005 Ω)
Others : ± (1.0%+0.0005 Ω)
Table 8 Te st condition, procedure and requirements
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
11
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
IPC/JEDEC
J-STD-002B test B
Electrical Test not required
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245± 3 °C
Dipping time: 3± 0.5 seconds
Well tinned (≥95% covered)
No visible damage
- Leaching
IPC/JEDEC
J-STD-002B test D
Leadfree solder, 260 °C,
30 seconds immersion time
No visible damage
- Resistance to
Soldering Heat
MIL-STD-202G-method 210F
IEC 60115-1 4.18
Condition B, no pre-heat of samples
Leadfree solder, 260 °C,
10 seconds immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
± (0.5%+0.0005 Ω)
No visible damage
Chip Resistor Surface Mount
www.yageo.com
Sep. 08, 2020 V.9
Product specification
12
12
SERIES
PE_L
0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
REVISION HISTORY
TYPE
POWER
TOLERANCE
RESISTANCE RANGE
TEMPERATURE COEFFICIENT
OF RESISTANCE
PF
0603
1/10W, 1/5W, 3/10W, 2/5W, 1/2W
±1%
± 2%
± 5%
5 mΩ ≦ R < 100 mΩ
±75 ppm/°C
0805
1/8W, 1/4W, 1/3W, 1/2W
4 mΩ ≦ R < 100 mΩ
1206
1/4W, 1/2W
3 mΩ ≦ R < 100 mΩ
2010
1/2W, 1W
The resistors are constructed
using outstanding TCR level
material, which makes Yageo PF
resistors excellent for current
sensing application in battery
charger circuit & DC-DC
converter.
The composition of the resistive
material is adjusted to give the
approximate required resistance
and is covered with a protective
coating, which printed with the
resistance value.
Finally, the three external
terminations (Ni / matte Tin) are
added, as shown in Fig. 4.
5 mΩ ≦ R < 100 mΩ
2512
1W, 2W
1 mΩ ≦ R < 100 mΩ
3W
1 mΩ ≦ R ≦ 50 mΩ
4527
2W, 3W, 5W
6 mΩ ≦ R < 1Ω
NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING
REVISION
DATE
CHANGE
NOTIFICATION
DESCRIPTION
Version 9
Sep. 1, 2020
-
- Update dimensions of tape for PE0201 and PE1206
Version 8
Jun. 11, 2020
-
- Update the dimension for PE0805 5mohm & 6mohm
- Update the marking for PE0603
- Extend resistance range for PE0201
Version 7
Jan. 21, 2019
-
- Extended resistor value for PE2010 and 2512
Version 6
Oct. 22, 2018
-
- Extend resistor value for PE0603 and 0805, and 0.1% tol for 0805 > 50mΩ
- Add in pulse load behavior
Version 5
Nov 23, 2016
-
- Extend resistor value for 0.5%
Version 4
Dec. 21, 2015
-
- Update resistance value
Version 3
Aug. 06, 2015
-
- Update 0603 to 1206 TCR
Version 2
Apr. 20, 2015
-
- Extend resistor value
Version 1
Mar. 04, 2015
-
- Update TCR and operating temperature
Version 0
Feb. 10, 2015
-
- New datasheet for current sensor - low TCR PE series sizes of
0201/0402/0603/0805/1206/2010/2512, 0.5%, 1%, and 5%
