220CNQ030PbF Vishay High Power Products Schottky Rectifier, 220 A FEATURES Lug terminal anode 1 Lug terminal anode 2 * 150 C TJ operation * Center tap module RoHS * Low forward voltage drop COMPLIANT * High frequency operation * Guard ring for enhanced ruggedness and long term reliability * Lead (Pb)-free TO-244 Base common cathode * Designed and qualified for industrial level DESCRIPTION The 220CNQ.. center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, freewheeling diodes, welding, and reverse battery protection. PRODUCT SUMMARY IF(AV) 220 A VR 30 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS 220 A Rectangular waveform 30 V 18 000 A VRRM IFSM tp = 5 s sine VF 110 Apk, TJ = 125 C (per leg) TJ Range 0.41 V - 55 to 150 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage 220CNQ030PbF UNITS 30 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL TEST CONDITIONS VALUES UNITS 110 per leg IF(AV) 50 % duty cycle at TC = 122 C, rectangular waveform per device 220 A Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 15 A, L = 1 mH 99 mJ IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 22 A Repetitive avalanche current per leg Document Number: 94169 Revision: 28-Apr-08 5 s sine or 3 s rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied For technical questions, contact: ind-modules@vishay.com 18 000 1950 www.vishay.com 1 220CNQ030PbF Vishay High Power Products Schottky Rectifier, 220 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 110 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 110 A IRM (1) UNITS 0.49 TJ = 25 C 220 A 0.59 0.41 TJ = 125 C 220 A Maximum reverse leakage current per leg See fig. 2 VALUES V 0.55 TJ = 25 C 10 VR = Rated VR mA TJ = 125 C 650 7400 pF 7.0 nH 10 000 V/s Maximum junction capacitance per leg CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Typical series inductance per leg LS From top of terminal hole to mounting plane Maximum voltage rate of change dV/dt Rated VR Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case Thermal resistance, case to heatsink Weight per leg per module SYMBOL MIN. TYP. TJ, TStg - 55 - RthJC RthCS MAX. UNITS - 150 C - 0.38 - - 0.19 - 0.10 - - 68 2.4 - Mounting torque 35.4 (4) - 53.1 (6) Mounting torque center hole 30 (3.4) - 40 (4.6) Terminal torque 30 (3.4) - 44.2 (5) Vertical pull - - 80 2" lever pull - - 35 www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com C/W g oz. lbf in (N m) lbf in Document Number: 94169 Revision: 28-Apr-08 220CNQ030PbF Schottky Rectifier, 220 A 10 000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 1000 TJ = 150 C 100 TJ = 125 C 10 TJ = 25 C 1 0.1 Vishay High Power Products TJ = 150 C 1000 TJ = 125 C 100 TJ = 100 C 10 TJ = 75 C 1 TJ = 50 C TJ = 25 C 0.1 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 5 VFM - Forward Voltage Drop (V) 10 15 20 25 30 VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 10 000 TJ = 25 C 1000 0 5 10 15 20 25 30 35 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 1 0.1 0.01 0.001 0.00001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.0001 0.001 0.01 0.1 1.0 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94169 Revision: 28-Apr-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 220CNQ030PbF 80 160 150 DC 140 130 Square wave (D = 0.50) 80 % rated VR applied 120 110 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 70 Average Power Loss (W) Allowable Case Temperature (C) Vishay High Power Products Schottky Rectifier, 220 A 60 50 RMS limit 40 DC 30 20 10 See note (1) 0 100 0 20 40 60 80 120 100 140 0 160 20 40 60 80 100 120 140 160 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 100 000 10 000 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94169 Revision: 28-Apr-08 220CNQ030PbF Schottky Rectifier, 220 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 22 0 C N Q 1 2 3 4 5 030 PbF 1 - Average current rating (x 10) 2 - Product silicon identification 3 - C = Circuit configuration 4 - N = Not isolated 5 - Q = Schottky rectifier diode 6 - Voltage rating (30 V) 7 - Lead (Pb)-free 6 7 LINKS TO RELATED DOCUMENTS Dimensions Document Number: 94169 Revision: 28-Apr-08 http://www.vishay.com/doc?95021 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 Outline Dimensions Vishay Semiconductors TO-244 DIMENSIONS in millimeters (inches) 35 (1.37) REF. 13 (0.51) 7 (0.27) 6 (0.23) 17.5 (0.69) 16.5 (0.65) 80 (3.15) O 5.2 (O 0.20) 3 12.6 (0.5) O 7.2 (O 0.28) (2 places) 3 1 2 21 (0.82) 20 (0.78) 1/4" - 20 UNC 9.6 (0.37) MIN. 93 (3.66) MAX. Document Number: 95021 Revision: 25-Jun-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000