MS3475G
w/AMENDME NT 1
27 October 2015
SUPERSEDING
MS3475G
11 M ar ch 2015
DETAIL SPEC I FIC ATION SH E ET
CONNECTORS, PLUG, ELECTRI CAL, RFI SHIEL DED, SERIES 2,
CRIMP TYPE, BA YONET COUPL ING, CLASSES A, D, L, T, W AND K
Thi s specific ation i s app r oved for use by all Depart men ts
and Agencies of the Department of Def ens e.
The requirements for acquiring the product described herein
sh all con s is t of this specification sheet and MIL-DTL-26482.
NOTE: For “ XX”, see note 5 and table I for c ontact c avities requiri ng reduced d imensi ons.
FIGU RE 1. Plug, dim ensions.
AMSC N/A FSC 5935
INCH-POUND
Reac tivat ed after 1 March 2007, and may b e used
for new and existing designs and acquisitions.
MS3475G
w/AMENDME NT 1
2
FIGU RE 1. Plug, dim ensions - Continued.
MS3475G
w/AMENDME NT 1
3
D ETAIL T
(COUP LING RING REM OVED
FOR CLARITY)
FIGU RE 1. Plug, dim ensions - Continued.
MS3475G
w/AMENDME NT 1
4
FIGU RE 1. Plug, dim ensions - Continued.
MS3475G
w/AMENDME NT 1
5
FIGU RE 1. Plug, dim ensions - Continued.
COUPLED POSITION
ASSEMBLED TO
RFI BACKSH ELL
MS3475G
w/AMENDME NT 1
6
Shell
size
A
F R S V’’’
Max weig h t
lbs (grams) 1/
Pin Socket
8
.782
(19.86)
.887
(22.53)
.369
(9.37)
.363 (9.22)
.343 (8.71)
2.334
(59.28)
.0204
(9.26)
.0216
(9.81)
10
.926
(23.52)
.887
(22.53)
.497
(12.62)
2.334
(59.28)
.0406
(18.43)
.0421
(19.11)
12
1.043
(26.49)
.887
(22.53)
.614
(15.60)
2.334
(59.28)
.0505
(22.93)
.0536
(24.33)
14
1.183
(30.05)
.887
(22.53)
.739
(18.77)
2.334
(59.28)
.0639
(29.01)
.0692
(31.42)
16
1.305
(33.15)
.887
(22.53)
.864
(21.95)
2.334
(59.28)
.0788
(35.77)
.0880
(39.95)
18
1.391
(35.33)
.887
(22.53)
.969
(24.61)
2.334
(59.28)
.0864
(39.22)
.0957
(43.44)
20
1.531
(38.89)
.825
(20.96)
1.094
(27.79)
.425 (10.80)
.405 (10.29)
2.334
(59.28)
.1016
(46.12)
.1114
(50.57)
22
1.656
(42.06)
.825
(20.96)
1.219
(30.96)
2.334
(59.28)
.1241
(56.34)
.1363
(61.88)
24
1.777
(45.14)
.825
(20.96)
1.344
(34.14)
2.334
(59.28)
.1400
(63.56)
.1916
(86.98)
1/ L ess contacts and accessories. Maximum weights d o not apply to clas s S.
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.008
0.20
.065
1.66
.187
4.75
.320
8.13
.025
0.64
.069
1.75
.200
5.08
.337
8.56
.029
0.74
.087
2.21
.218
5.54
.357
9.07
.032
0.81
.097
2.46
.225
5.72
.399
10.13
.042
1.07
.101
2.57
.269
6.83
.419
10.64
.045
1.14
.107
2.72
.200
5.08
1.230
31.24
.046
1.17
NOTES:
1. Dimensions are in inches. Metric equivalent s are given for in formation only and are
in parentheses.
2. Unles s ot herwis e speci fied, toleranc es are ± .005 (0.13 mm) for 3 place deci mals ,
± .01 (0.3 mm) for 2 place deci mals , and ± 1° for all angl es.
3. Color bands : .070 ± .031 (1.78 ± 0.79 mm) wide, color bl ue.
4. Connector assembl y mus t be us ed with a backshell. Backshel l s mus t be proc ur ed sep arately.
S ee SAE-AS85049 for applicable backshells .
5. I nsert ar r angements req ui r ing r educed di am eters for raised seal barr ier on outer r ow o f con tac t
cavities as i ndi cated.
FIGU RE 1. Plug, dim ensions - Continued.
MS3475G
w/AMENDME NT 1
7
TABLE I. Cont act cavit i es requirin g r educed diamet er s (XX ) for pi ns and sockets
in out er r ow of cont act cavit ies. 1/
Shell size Insert arrangement Contact cavities
8
-33 & -98
A, B, C
12
-10
C, G
14
-12
A, B, C, D, E, F, G, H
14
-18
A, C, E, G, J, L
14
-19
B, D, F, H, K, M
16
-26
A, B, C, D, E, F, G, H, J, K, L, M, N, P, R
18
-32
A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T
22
-41
A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y
1/ The reduced diam eter “ XX” refers t o the diameters of the raised seal barriers (pin barri er r in gs) or
lead-in chamfers (s ocket entry holes) to ens ure pr oper sealing of pin and socket aft er mating. See
MIL-DTL-26482, connec tor i ntermateabil i ty control di mensions figure (seri es 1 an d series 2) for
reduced diam eter “ XX” for c ontac t s i ze 20 only.
REQUIREMENTS:
Dimensions and configurat ion : See figure 1 and ta bl e I.
Connector mating: This con nect or m ates with M S3470, MS 3471, MS3472 , MS3473, MS3474 , MS3477
and MS3479.
Connectors will m at e wit h MS3115 (dummy stowage receptacl e) and the followi ng series 1 receptac l es
provided both mating connect or s contain a full c om pl i ment of power cont act s: MS3110, MS3112,
MS3113 , MS3114, MS3119, MS3120, MS3122, MS3124, MS3127 and M S3128.
I ntermateability and rear accessory interc hangeabil i ty d imensi ons are in ac cordance with
MIL-DTL-26482.
Class E i s cancelled and repl aced b y c l ass L. Class Z is cancelled and supers eded by class K.
This specification s heet super sed es MIL-C-8372 3/42 and MIL-C-83723/43.
For in sert arrangement, see MIL -STD-1669.
In sert arrangement s requir i ng r educ ed di am eters for raised seal barriers or l ead-in chamfers on outer
row o f con tac t c avities as indicat ed, see table I.
Connector i dentificat i on mar king s hal l b e in accordance wit h M IL-DTL-26482. Example: MS3475L----,
minimum h eigh t does not apply t o shell siz es 8, 10 and 12.
P ar t or Ident i fying Number ( PIN) example:
MS3475 L 24 - 61 P W
MS number
Class
Shell size
I nsert ar r angement
Contact style
A lter nate insert position
MS3475G
w/AMENDME NT 1
8
Amendment notations. The margins of this specification ar e mark ed wit h vert ical lines to indicat e
modification s generat ed by t hi s amendment . Th i s was don e as a convenience onl y and the Government
assumes no l iab ility wh ats oever for any in accur acies in thes e notat i ons. Bi dders an d cont r act or s are
cautioned to evalu ate th e r equiremen ts of this document b ased on t he entire content ir r espective of the
marginal notat ion s.
Referenced docu ments. In addition to MIL-DTL-26482, this document referenc es t he following:
MS3110
MS3112
MS3113
MS3114
MS3115
MS3119
MS3120
MS3122
MS3124
MS3127
MS3128
MS3470
MS3471
MS3472
MS3473
MS3474
MS3477
MS3479
MIL-STD-1669
SAE-AS85049
CONCLUDING MATERIAL
Custodians: P r eparin g act i vity:
Army – CR DLA – CC
Navy – AS
A ir For ce – 85 ( Project 5935 –2015-225)
DLA – CC
Review acti vities:
Army – AR, AV
Navy – EC, SH
A ir For ce – 99
NOTE: The activiti es li st ed above w er e in terest ed i n this document as of the date of thi s document.
S in ce organization s and res pons ib ilities can ch ange, you shou ld verify th e currenc y of the i nformation
above us in g the ASS IST Onli ne database at https://assist.dla.mil.
