DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix CMOS Analog Switches (Obsolete for non-hermetic. Use DG304B Series as pin-for-pin replacements.) FEATURES BENEFITS D D D D D D D D D D "15-V Input Range Fast Switching--tON: 110 ns Low rDS(on): 30 W Single Supply Operation CMOS Logic Levels Micropower: 30 nW APPLICATIONS Full Rail-to-Rail Analog Signal Range D Low Level Switching Circuits Low Signal Error D Programmable Gain Amplifiers Wide Dynamic Range D Portable and Battery Powered Systems Low Power Dissipation DESCRIPTION The DG304A_MIL through DG307A_MIL series of monolithic CMOS switches were designed for applications in communications, instrumentation and process control. This series is well suited for applications requiring fast switching and nearly flat on-resistance over the entire analog range. applications, without sacrificing switching speed. Break-before-make switching action is guaranteed, and an epitaxial layer prevents latchup. Single supply operation (for positive switch voltages) is allowed by connecting the V- rail to 0 V. Designed on the Vishay Siliconix PLUS-40 CMOS process to achieve low power consumption and excellent on/off switch performance, these switches are ideal for battery powered Each switch conducts equally well in both directions when on, and blocks up to the supply voltage when off. These switches are CMOS input compatible. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG304A_MIL DG304A_MIL Dual-In-Line Metal Can V+ (Substrate and Case) NC D1 NC S1 NC IN1 GND 1 14 2 13 V+ 4 11 S2 5 10 NC 9 IN2 8 1 NC 12 7 D2 10 3 6 D1 D2 TRUTH TABLE 9 S1 2 IN1 V- S2 8 7 3 6 4 NC 5 V- IN2 Logic Switch 0 OFF 1 ON Logic "0" v 3.5 V Logic "1" w 11 V GND Top View Document Number: 71678 S-04302--Rev. A, 16-Jul-01 Top View www.vishay.com 1 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG305A_MIL DG305A_MIL Dual-In-Line Metal Can V+ (Substrate and Case) NC D1 NC S1 NC IN GND 1 14 2 13 3 12 V+ 11 5 10 NC 6 9 NC 7 8 V- D2 10 1 NC S2 4 D1 D2 S1 S2 2 IN TRUTH TABLE 9 7 3 SW1 0 OFF ON 1 ON OFF NC 5 SW2 Logic "0" v 3.5 V Logic "1" w 11 V 6 4 NC Logic 8 V- GND Top View Top View DG306A_MIL Dual-In-Line NC TRUTH TABLE V+ 1 14 S3 2 13 S4 Logic Switch D3 3 12 D4 0 OFF D1 4 11 D2 S1 5 10 S2 IN1 6 9 IN2 7 8 GND 1 ON Logic "0" v 3.5 V Logic "1" w 11 V V- Top View DG307A_MIL Dual-In-Line NC Four SPST Switches per Package TRUTH TABLE V+ 1 14 S3 2 13 S4 Logic D3 3 12 D4 0 OFF ON 1 ON OFF D1 4 11 D2 S1 5 10 S2 IN1 6 9 IN2 7 8 GND SW1, SW2 SW3, SW4 Logic "0" v 3.5 V Logic "1" w 11 V V- Top View www.vishay.com 2 Document Number: 71678 S-04302--Rev. A, 16-Jul-01 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix ORDERING INFORMATION Temp Range Package Part Number DG304A_MIL DG304AK/883 14-Pin CerDIP -55 to 125_C _ JM38510/11605BCA 10-Pin Can JM38510/11605BIA 14-Pin Sidebraze JM38510/11605BCC 14-Pin CerDIP JM38510/11605BCA 10-Pin Can JM38510/11606BIC 14-Pin Sidebraze JM38510/11606BCA DG305A_MIL -55 to 125_C DG306A_MIL DG306AAK/883 14-Pin CerDIP -55 to 125_C 14-Pin Sidebraze JM38510/11607BCA JM38510/11607BCC DG307A_MIL DG307AAK -55 to 125_C _ 14-Pin CerDIP DG307AAK/883 JM38510/11608BCA 14-Pin Sidebraze JM38510/11608BCC ABSOLUTE MAXIMUM RATINGS Voltages Referenced to V- V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 V GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V Digital Inputsa, VS, VD . . . . . . . . . . . . . . . . . . . . . . . . (V-) -2 V to (V+) +2V or 30 mA, whichever occurs first Current, Any Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Continuous Current, S or D (Pulsed at 1 ms, 10% duty cycle max) . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA Storage Temperature Document Number: 71678 S-04302--Rev. A, 16-Jul-01 (AAA, AAK, Suffix) . . . . . . . . . . . . -65 to 150_C Power Dissipationb 14-Pin CerDIPc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 mW 10-Pin Metal Cand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 mW Notes: a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/_C above 25_C d. Derate 6 mW/_C above 75_C www.vishay.com 3 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix SPECIFICATIONSa Test Conditions Unless Specified Parameter Symbol V+ = 15 V, V- = -15 V VIN = 3.5 V or 11 Vf Limits Tempb Minc Full -15 Typd Maxc Unit 15 V 30 50 75 W Analog Switch Analog Signal Rangee VANALOG Drain-Source On-Resistance rDS(on) VD = "10 V, IS = 10 mA Room Full Source Off Leakage Current IS(off) VS = "14 V VD = #14 V Room Full -1 -100 "0.1 1 100 Drain Off Leakage Current ID(off) VS = "14 V VD = #14 V Room Full -1 -100 "0.1 1 100 Drain On Leakage Current ID(on) VD = VS = "14 V Room Full -2 -200 "0.1 2 200 VIN = 5 V Room Full -1 -1 -0.001 VIN = 15 V Room Full VIN = 0 V Room Full nA Digital Control Input Current with Input Voltage High Input Current with Input Voltage Low IINH IINL 0.001 -1 -1 1 1 mA -0.001 Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make Time Charge Injection Source-Off Capacitance Room 110 250 Room 70 150 tOPEN DG305A_MIL/307A ONLY See Figure 3 Room 50 Q CL = 1 nF, Rgen = 0 Vgen = 0 V, See Figure 4 Room 30 Room 14 Room 14 Room 40 VIN = 0 V Room 6 VIN = 15 V Room 7 62 CS(off) Drain-Off Capacitance CD(off) Channel-On Capacitance CD(on) Input Capacitance See Figure 2 CIN f = 1 MHz, VS = 0 V VS, VD = 0 V f = 1 MHz Off-Isolation OIRR VIN = 0 V, RL = 1 kW Room Crosstalk (Channel-to-Channel) XTALK VS = 1 Vrms, f = 500 kHz Room 74 Room Full 0.001 ns pC pF dB Power Supplies Positive Supply Current I+ VIN = 15 V or 0 V (All Inputs) Negative Supply Current I- Room Full -10 -100 -0.001 10 100 m mA Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25_C, Full = as determined by the operating temperature suffix. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. www.vishay.com 4 Document Number: 71678 S-04302--Rev. A, 16-Jul-01 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) rDS(on) vs. VD and " Power Supply rDS(on) vs. VD and + Power Supply Voltage W) W) 100 80 "5 V 60 "7.5 V 40 "10 V "15 V 20 "20 V TA = 25_C V- = 0 V 100 +7.5 V r DS(on)- Drain-Source On-Resistance ( r DS(on)- Drain-Source On-Resistance ( TA = 25_C 80 +10 V 60 +15 V +20 V 40 20 0 0 -20 -15 -10 -5 0 5 10 15 20 0 5 VD - Drain Voltage (V) 10 15 20 VD - Drain Voltage (V) Input Switching Threshold vs. V+ and V- Supply Voltages Leakage Currents vs. Analog Voltage 10 10 TA = 25_C 9 0 ID(off) or IS(off) 8 7 6 ID(on) V T (V) I S, I D (pA) -10 -20 5 4 3 -30 2 1 -40 0 -15 -12 -9 -6 -3 0 3 6 9 12 15 "5 0 Switching Time vs. Positive Supply Voltage "15 "20 Switching Time vs. Negative Supply Voltage 240 240 V- = -15 V TA = 25_C VINH = 15 V VINL = 0 V 200 V+ = 15 V TA = 25_C VINH = 15 V VINL = 0 V 200 tON t ON , t OFF (ns) t ON , t OFF (ns) "10 V+, V- Positive & Negative Supplies (V) VD or VS - Drain or Source Voltage (V) 160 120 tOFF 80 160 tON 120 tOFF 80 40 40 0 5 10 V+ - Positive Supply Voltage (V) Document Number: 71678 S-04302--Rev. A, 16-Jul-01 15 0 -5 -10 -15 V- - Negative Supply Voltage (V) www.vishay.com 5 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Supply Currents vs. Toggle Frequency 8 V+ = 15 V RL = R CL = 0 VS = Open I+, I- (mA) 6 4 2 0 1k 10 k 100 k 1M f - Frequency (Hz) SCHEMATIC DIAGRAM (TYPICAL CHANNEL) V+ S V- Level Shift/ Drive VIN V+ GND D V- FIGURE 1. TEST CIRCUITS +15 V Logic "1" = Switch On V+ VS = 3 V S Logic Input D VINH 50% VO 0V IN RL 300 W 15 V CL 33 pF VS V- GND 90% 10% 0V -15 V CL (includes fixture and stray capacitance) VO = VS 6 tON tOFF RL RL + rDS(on) www.vishay.com Switch Output FIGURE 2. Switching Time Document Number: 71678 S-04302--Rev. A, 16-Jul-01 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix TEST CIRCUITS +15 V V+ VS1 = 3 V VS2 = 3 V Logic "1" = Switch On Logic Input S1 D1 S2 D2 VO1 VO2 IN V- GND Switch Output RL1 300 W RL2 300 W CL1 33 pF CL2 33 pF VINH 50% 0V VS1 50% VO1 0V VS2 VO2 Switch Output 50% 0V tBBM -15 V CL (includes fixture and stray capacitance) FIGURE 3. Break-Before-Make SPDT (DG305A_MIL, DG307A_MIL) +15 V Rg V+ S IN Vg DVO D VO VO CL 1 nF 3V INX ON V- GND OFF ON Q = DVO x CL -15 V FIGURE 4. Charge Injection APPLICATION HINTSa GND Voltage (V) VIN Logic Input Voltage VINH(min)/VINL(max) (V) VS or VD Analog Voltage Range (V) -15 0 11/3.5 -15 to 15 -20 0 11/3.5 -20 to 20 0 0 11/3.5 0 to 15 V+ Positive Supply Voltage (V) V- Negative Supply Voltage (V) 15 20 15 Notes: a. Application Hints are for DESIGN AID ONLY, not guaranteed and not subject to production testing. Document Number: 71678 S-04302--Rev. A, 16-Jul-01 www.vishay.com 7 DG304A_MIL/305A_MIL/306A_MIL/307A_MIL Vishay Siliconix APPLICATIONS +15 V -15 V 10 kW VIN 10 kW VOUT +15 V -15 V 10 kW 10 kW 100 kW 1 MW A1 A0 DG304A Binary Input Gain 11 10 01 00 1 10 100 1000 FIGURE 5. Low Power Binary to 10n Gain Low Frequency Amplifier +15 V -15 V -15 V VIN1 +15 V VOUT VIN2 CMOS Logic Input Select High = VIN1 -15 V +15 V CMOS Logic Gain Select High = 10x 1x 10x DG307A GND 20 kW 180 kW FIGURE 6. Low Power Non-Inverting Amplifier with Digitally Selectable Inputs and Gain www.vishay.com 8 Document Number: 71678 S-04302--Rev. A, 16-Jul-01 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1