TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 50 WATT ZENER DIODES Qualified per MIL-PRF-19500/358 DEVICES LEVELS 1N3305B thru 1N3350B & RB and 1N4549B thru 1N4556B & RB JAN JANTX JANTXV B = Standard Polarity: RB = Reverse Polarity DESCRIPTION These high power 50W Zener diodes represented by the JEDEC registered 1N3305B thru 1N3350B and 1N4549B thru 1N4556B series provide voltage regulation in a selection over a 3.9V to 200V broad range of voltages. They may be operated up to 50 W with adequate mounting and heat sinking with their low thermal resistance. These Zeners are also available in JAN, JANTX, JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower power applications. IMPORTANT: For the most current data, consult MICROSEMI's website: DO-5 (DO-203AB) http://www.microsemi.com FEATURES 3/4 JEDEC registered 1N3305B thru 1N3350B and 1N4549B thru 1N4556B 3/4 Internal solder bond construction 3/4 Hermetically sealed (welded) 3/4 Zener Voltage 3.9V to 200V. 3/4 Also available in JAN, JANTX, and JANTXV qualifications per MIL-PRF19500/358 by adding the JAN, JANTX, or JANTXV prefixes to part numbers for desired level of screening; (e.g. JANTX1N3305B, JANTXV1N3318B, etc. 3/4 Standard polarity is anode to case 3/4 Reverse polarity with cathode to case by designating R suffix in part number, e.g. 1N3305RB, etc. 3/4 Consult factory for surface mount equivalents T4-LDS-0077 Rev. 2 (101152) Page 1 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 APPLICATIONS / BENEFITS 3/4 Regulates voltage over a broad operating current and temperature range 3/4 Standard voltage tolerances are +/- 5% with B suffix 3/4 Consult factory for +/-10% with an A suffix, +/-20% with no suffix, +/-2% with a C suffix and +/-1% with a D suffix respectively 3/4 Reverse polarity available 3/4 Nonsensitive to ESD per MIL-STD-750 Method 1020 3/4 Inherently radiation hard as described in Microsemi MicroNote 050 MAXIMUM RATINGS 3/4 Junction & Storage Temperatures: -65C to +175C 3/4 DC Power Dissipation: 50 watts at TC < 75C 3/4 Power Derating: 0.5 W/C above 75C 3/4 Forward Voltage @ 10A: 1.5 Volts 3/4 THERMAL RESISTANCE: 2.0C/W maximum junction to hexagonal base (1.5C/W typical) 3/4 Solder temperatures: 260C for 10s (max) MECHANICAL AND PACKAGING 3/4 CASE: Industry Standard DO-5 (DO-203AB), 11/16 inch hexagonal stud with 1/4-28 threads welded hermetically sealed metal and glass 3/4 FINISH: All external surfaces are corrosion resistant and terminal solderable. 3/4 POLARITY: Standard Polarity units are connected anode to case. Reverse polarity (cathode to case) is indicated by Suffix R in part number 3/4 WEIGHT: 15 grams 3/4 MOUNTING HARDWARE: Consult factory for optional insulator, bushing, solder terminal, washers and nut 3/4 See package dimensions on last page T4-LDS-0077 Rev. 2 (101152) Page 2 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 ELECTRICAL CHARACTERISTICS @ 30oC Case Temperature JEDEC TYPE NO. (Note 1) 1N4549B 1N4550B 1N4551B 1N4552B 1N4553B 1N4554B 1N4555B 1N4556B 1N3305B 1N3306B 1N3307B 1N3308B 1N3309B 1N3310B 1N3311B 1N3312B 1N3313B 1N3314B 1N3315B 1N3316B 1N3317B 1N3318B 1N3319B 1N3320B 1N3321B 1N3322B 1N3323B 1N3324B 1N3325B 1N3326B 1N3327B 1N3328B 1N3329B 1N3330B 1N3331B 1N3332B 1N3333B 1N3334B 1N3335B 1N3336B 1N3337B 1N3338B 1N3339B 1N3340B 1N3341B 1N3342B 1N3343B 1N3344B 1N3345B 1N3346B 1N3347B 1N3348B 1N3349B 1N3350B NOMINAL ZENER VOLTAGE VZ @ IZT Volts (Note 2) 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 6.8 7.5 8.2 9.1 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 25.0 27.0 30.0 33.0 36.0 39.0 43.0 45.0 47.0 50.0 51.0 52.0 56.0 62.0 68.0 75.0 82.0 91.0 100.0 105.0 110.0 120.0 130.0 140.0 150.0 160.0 175.0 180.0 200.0 T4-LDS-0077 Rev. 2 (101152) ZENER TEST CURRENT (IZT) mA 3,200 2,900 2,650 2,450 2,250 2,000 1,850 1,650 1,850 1,700 1,500 1,370 1,200 1,100 1,000 960 890 830 780 740 700 660 630 570 520 500 460 420 380 350 320 290 280 270 250 245 240 220 200 180 170 150 140 120 120 110 100 95 90 85 80 70 68 65 MAX. DYNAMIC IMPEDANCE (Note 3) ZZT @ IZT OHMS 0.16 0.16 0.12 0.12 0.12 0.14 0.16 0.24 0.20 0.30 0.40 0.50 0.60 0.80 1.00 1.10 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.50 2.60 2.70 2.80 3.00 3.20 3.50 4.00 4.50 4.50 5.00 5.00 5.20 5.50 6.00 7.00 8.00 9.00 11.00 15.00 20.00 25.00 30.00 40.00 50.00 60.00 75.00 80.00 85.00 90.00 100.00 ZZK @ IZK = 5 mA OHMS 400 500 600 650 900 1,000 200 100 70 70 70 70 80 80 80 80 80 80 80 80 80 80 80 80 80 90 90 90 90 90 90 90 100 100 100 100 100 110 120 140 150 160 180 200 210 220 240 275 325 400 450 500 525 600 MAX. DC ZENER CURRENT (IZM) mA 11,900 10,650 9,700 8,900 8,100 7,300 6,650 6,050 6,600 5,900 5,200 4,800 4,300 3,900 3,800 3,300 3,000 2,800 2,650 2,500 2,300 2,200 2,100 1,900 1,750 1,550 1,500 1,400 1,300 1,150 1,050 975 930 880 830 810 790 740 660 600 540 490 420 400 380 365 335 310 290 270 250 230 220 200 MAX. REVERSE CURRENT** IR(max) @ VR A 150 150 100 20 20 20 10 10 300 125 50 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 VOLTS 0.5 0.5 1.0 1.0 1.0 2.0 2.0 3.0 4.5 5.0 5.4 6.1 6.7 8.4 9.1 9.9 11.4 11.4 12.2 13.0 13.7 13.7 15.2 16.7 18.2 18.2 20.6 22.8 25.1 27.4 29.7 32.7 32.7 35.8 38.8 38.8 42.6 42.6 47.1 51.7 56.0 62.2 69.2 76.0 83.0 83.0 91.2 99.8 114.0 114.0 121.6 121.6 136.8 152.0 TYPICAL TEMP. COEFF. VZ %/oC -0.046 -0.033 -0.015 +/-0.010 +0.030 +0.049 +0.053 +0.057 0.040 0.045 0.048 0.050 0.055 0.060 0.065 0.065 0.070 0.070 0.070 0.075 0.075 0.075 0.075 0.080 0.080 0.080 0.085 0.085 0.085 0.085 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.095 0.095 0.095 0.095 0.095 0.095 0.095 0.095 0.095 0.100 Page 3 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 * JEDEC Registered Data. ** Not JEDEC Data. Have JAN and JANTX and TXV Qualifications to MIL-S-19500/358. See further notes on following page. NOTES: 1. The JEDEC type numbers shown (B suffix) have a +/- 5% tolerance on nominal zener voltage. If other tolerance is required consult factory. The suffix A is used to identify +/-10% tolerance; no suffix or just R indicates +/-20% tolerance: C suffix indicates +/-2% tolerance; and D suffix indicates +/-1%. Example: 1N3319RB is a REVERSED polarity, 20 volt unit having a +/-5% tolerance on Zener Voltage. 2. Zener Voltage (VZ) is measured with junction in thermal equilibrium with 30oC stud temperature. 3. The Zener impedance is derived from the 60 cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at 2 points to ensure a sharp knee on the breakdown curve and to eliminate unstable units. A curve showing the variation of zener impedance vs. zener current for three representative types is shown in Figure 2. Also see Microsemi MicroNote 202. T4-LDS-0077 Rev. 2 (101152) Page 4 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Rated Power Dissipation - Watts GRAPHS o Stud Temperature C FIGURE 1 Power Derating Curve FIGURE 2 Typical Zener Impedance vs. Zener Current T4-LDS-0077 Rev. 2 (101152) Page 5 of 6 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS NOTES: 1. Dimensions are in inches. 2. Maximum pitch diameter of plated threads shall be basic pitch diameter; (.2268). .250-28 UNF-2B UNF-2A THD NF optional. 3. Complete threads to extend to within 1-1/2 threads of seating plane. 4. Angular orientation of this terminal is undefined. 5. Metric equivalents are given for general information only. 6. Diameter of unthreaded portion shall be .249 maximum and .220 minimum Ltr b C CD CH HF HT OAH SL UD T Dimensions Inches Millimeters Min Max Min Max --.375 --9.53 --.080 --2.03 --.667 --16.94 --.450 --11.43 .667 .687 16.94 17.45 .060 --1.52 ----1.000 --25.40 .422 .453 10.72 11.51 .220 .249 --.175 --4.45 Notes 2, 3, 6 FIGURE 1. Physical dimensions. T4-LDS-0077 Rev. 2 (101152) Page 6 of 6