TO-220F 10A Triac TM1041S-L, TM1061S-L Features External Dimensions 3.30.2 ) Isolation voltage: VISO=1500V(50Hz Sine wave, RMS) 13.0 min UL approved type available 0.2 0.2 3.9 0.8 Gate trigger current: IGT=30mA max (MODE , , 16.9 0.3 RMS on-state current: IT(RMS)=10A 10.0 0.2 4.2 C 0.5 2.8 0.2 0.2 8.4 0.2 4.0 (Unit: mm) Repetitive peak off-state voltage: VDRM=400, 600V a b 0.15 1.35 0.15 1.35 +0.2 0.85 - 0.1 2.54 2.54 2.2 +0.2 0.45 - 0.1 2.4 0.2 0.2 (1). Terminal 1 (T1) (2). Terminal 2 (T2) (3). Gate (G) (1) (2) (3) a. Part Number b. Lot Number Weight: Approx. 2.1g Absolute Maximum Ratings Parameter Symbol Ratings TM1041S-L TM1061S-L 400 600 Unit Conditions Repetitive peak off-state voltage VDRM RMS on-state current IT(RMS) 10.0 A Conduction angle 360, Tc=90C Surge on-state current ITSM 100 A 50Hz full-cycle sinewave, Peak value, Non-repetitive, Tj=125C Peak gate voltage VGM 10 V Peak gate current IGM 2 A Peak gate power loss PGM 5 W Average gate power loss V PG(AV) 0.5 W Junction temperature Tj - 40 to +125 C Storage temperature Tstg - 40 to +125 C Isolation voltage VISO 1500 Vrms 50Hz Sine wave, RMS, Terminal to Case, 1 min. Electrical Characteristics Parameter Symbol Off-state current IDRM On-state voltage VTM Gate trigger voltage (Tj=25C, unless otherwise specified) Ratings min typ max 0.3 2.0 0.1 1.6 VGT 0.8 2.0 0.7 2.0 0.8 2.0 Unit mA V Conditions VD=VDRM, RGK=, Tj=125C VD=VDRM, RGK=, Tj=25C Pulse test, ITM=14A + V VD=6V, RL=10, TC=25C Gate trigger current IGT Holding current Thermal resistance 40 VGD IH Rth - - - T2 , G - + + + + - - - - + T2 , G 30 13 30 15 30 mA VD=6V, RL=10, TC=25C T2 , G T2 , G T2 , G 30 Gate non-trigger voltage + T2 , G T2 , G 0.9 10 + T2 , G V 0.2 mA 15 3.3 C/W VD=1/2xVDRM, Tj=125C VD=6V Junction to case TM1041S-L, TM1061S-L Gate Characteristics 5 Tj=25C 1 0.5 80 60 6 3.0 3.5 IT(RMS) - Tc Ratings 6 4 2 75 50 25 4 6 8 10 12 0 RMS on-state current IT(RMS) (A) 2 4 6 8 10 0 0.5 ( 10 2 10 Pulse width 1.5 1.0 0.5 0.5 1 10 2 10 1.5 2.0 2.5 103 0 25 50 75 100 Junction temperature Tj (C) 2.0 125 75 100 125 Tj= - 40C vgt -20C 0C tw 25C 50C 75C 100C 125C 1.5 1.0 0.5 0.5 1 10 2 10 103 0.5 0.2 0.5 1 10 2 10 103 5 1 0.5 0.2 0.5 1 25 50 75 100 Junction temperature Tj (C) 125 103 t w (s) Transient thermal resistance Characteristics 100 rth (C/W) (T2-, G- ) (T2+, G- ) (T2+, G+ ) 5 0 10 2 10 Pulse width 10 1 -40 10 t w (s) (VD=6V, RL=10) MODE MODE MODE igt Tj= - 40C tw -20C 0C 25C 50C 75C 100C 125C Transient thermal resistance 0.2 50 ) 1 100 Gate trigger current IGT (mA) 0.4 ( 5 50 0.6 gate trigger IGT DC current at 25C 10 (Typical) 0.8 25 (MODE - ) Tj= - 40C tw -20C 0C 25C 50C 75C 100C 125C Pulse width (T2-,G- ) (T2+,G+ ) (T2+,G- ) 0 Junction temperature Tj (C) 30 IGT temperature characteristics 1.0 2 -40 Pulse width tw (s) igt t w (s) (VD=6V, RL=10) MODE MODE MODE 5 3.0 103 (Typical) 1.2 + ( T2 - T1 ) (MODE - ) VGT temperature characteristics 0 -40 1.0 trigger current igt (Gate ) at Tj and tw 1 0.5 0.2 0.5 1 - 10 25 ) ( trigger current igt (Gate ) at Tj and tw 5 - igt (Typical) gate trigger IGT DC current at 25C ) 10 + (MODE - ) Tj= - 40C tw -20C 0C 25C 50C 75C 100C 125C ) ( 50 30 igt (VD=30V, RGK=) (T2 - T1 ) Pulse width tw (s) 30 i 75 Tj= - 40C vgt -20C 0C tw 25C 50C 75C 100C 125C (MODE - ) gate trigger IGT DC current at 25C 100 trigger voltage vgt ( Gate ) at Tj and tw ) ( gate trigger VGT DC voltage at 25C ) ( gate trigger VGT DC voltage at 25C trigger voltage vgt ( Gate ) at Tj and tw trigger voltage vgt ( Gate ) at Tj and tw 103 Pulse trigger temperature Characteristics 3 50 RMS on-state current IT(RMS) (A) Pulse width tw (s) gt Gate trigger current at Tj and tw 125 (MODE - ) 10 2 10 (Typical) 2.0 1.0 0.5 0.5 1 2 vgt (Typical) Tj= - 40C vgt -20C 0C tw 25C 50C 75C 100C 125C 1.5 20 40 60 80 iGF (A) 100 0 12 (MODE - ) 2.0 0 Gate trigger current IGT (mA) IH temperature Characteristics Full-cycle sinewave Conduction angle : 360 Self-supporting Natural cooling No wind RMS on-state current IT(RMS) (A) Pulse trigger temperature Characteristics 0 1 Gate current 150 100 0 2 0 100 Full-cycle sinewave Conduction angle :360 Case temperature TC (C) 8 0 50 IT(RMS) - Ta Ratings 125 10 0 10 150 Full-cycle sinewave Conduction angle :360 12 5 Number of cycle 14 1 0 1 Holding current IH (mA) 2.5 vT ( V ) ) 2.0 2 See graph at the upper right 2 ( 1.5 3 4 40 gate trigger VGT DC voltage at 25C 1.0 IT(RMS) - PT(AV) Characteristics Gate trigger voltage VGT (V) 8 20 0.5 On-state voltage Average on-state power PT(AV) (W) 100 Ambient temperature Ta (C) 0.1 vGF (V) Tj=125C 10 10 ms 1cycle Gate voltage Surge on-state current ITSM (A) 10 120 W =5 P GM On-state current iT (A) 50 Tj= -40C Initial junction temperature Tj=125C ITSM Tj=25C 12 140 Tj= -20C ITSM Ratings 100 Gate trigger voltage VGT (V) vT - iT Characteristics (max) Junction to operating environment 10 Junction to case 1 0.1 0.1 1 10 10 2 103 10 4 10 5 t, Time (ms) 41