Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FAN73832 Half-Bridge Gate-Drive IC Features Description Floating Channel for Bootstrap Operation to +600V The FAN73832 is a half-bridge, gate-drive IC with shutdown and programmable dead-time control functions for driving MOSFETs and IGBTs, operating up to +600V. Typically 350mA/650mA Sourcing/Sinking Current Driving Capability for Both Channels Extended Allowable Negative VS Swing to -9.8V for Signal Propagation at VDD=VBS=15V High-Side Output in Phase of IN Signal Built-in UVLO Functions for Both Channels Built-in Common-Mode dv/dt Noise Canceling Circuit Internal 400ns Minimum Dead-Time at RDT=20K Programmable Turn-on Delay-Time Control (Dead-Time) Applications Fairchild's high-voltage process and common-mode noise canceling technique provide stable operation of high-side driver under high dv/dt noise circumstances. An advanced level-shift circuit allows high-side gate driver operation up to VS=-9.8V (typical) for VBS=15V. The UVLO circuits for both channels prevent malfunction when VDD and VBS are lower than the specified threshold voltage. Output drivers typically source/sink 350mA/650mA, respectively, which is suitable for all kinds of half- and full-bridge inverters. SMPS Motor Drive Inverter Fluorescent Lamp Ballast HID Ballast 8-SOP 8-DIP Ordering Information Part Number FAN73832M(1) FAN73832MX(1) FAN73832N Package 8-SOP Pb-Free Operating Temperature Range Packing Method Tube Yes 8-DIP -40C ~ 125C Tape & Reel Tube Note: 1. These devices passed wave soldering test by JESD22A-111. (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com FAN73832 Half-Bridge Gate-Drive IC February 2007 FAN73832 Half-Bridge Gate-Drive IC Typical Application Diagrams RBOOT VDC DBOOT VDD FAN73832 1 IN PWM 2 GND VB 8 HO 7 VS 6 LO 5 CBOOT 3 PWM IC Control Shutdown DT/ SD 4 VDD RDT FAN73832 Rev.01 Figure 1. Application Circuit for Half-Bridge Switching Power Supply VDC VCC VDD VB VDD HO PHA VB HO IN VS VS PHB Forward IN FAN73832 SD M FAN73832 Reverse DC Motor Controller LO DT/ SD LO DT/ SD GND GND FAN73832 Rev.01 Figure 2. Application Circuit for Full-Bridge DC Motor Driver (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 2 8 VB 7 HO 6 VS 4 VDD 5 LO 2 GND UVLO S Q HS(ON/ OFF) 1 3 R SCHMITT TRIGGER INPUT RDTINT DEAD - TIME CONTROL UVLO LS(ON/ OFF) DELAY DRIVER DT/SD R DRIVER PULSE GEN ERATOR IN NOISE CANCELLER FAN73832 Rev:00 Figure 3. Functional Block Diagram of FAN73832 (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 3 FAN73832 Half-Bridge Gate-Drive IC Internal Block Diagram FAN73832 Half-Bridge Gate-Drive IC Pin Assignments 1 GND 2 DT/SD 3 VDD 4 FAN73832 IN 8 VB 7 HO 6 VS 5 LO FAN73832 Rev:00 Figure 4. Pin Configuration (Top View) Pin Definitions Pin # Name 1 IN Description 2 GND 3 DT/SD 4 VDD Low-Side Supply Voltage 5 LO Low-Side Driver Output 6 VS High-Side Floating Supply Return 7 HO High-Side Driver Output 8 VB High-Side Floating Supply Logic Input Ground Dead-Time Control with External Resistor and Shutdown Function (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 4 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA=25C unless otherwise specified. Symbol Parameter VS High-side offset voltage VB High-side floating supply voltage Min. Max. Unit VB-25 VB+0.3 V -0.3 625 V VS-0.3 VB+0.3 V VHO High-side floating output voltage HO VDD Low-side and logic-fixed supply voltage -0.3 25 V VLO Low-side output voltage LO -0.3 VDD+0.3 V VIN Logic input voltage (IN) -0.3 VDD+0.3 V Dead-time and shutdown control voltage -0.3 5.0 V VDD-25 VDD+0.3 V 50 V/ns 8-SOP 0.625 W 8-DIP 1.25 VDT/SD GND dVS/dt PD(2)(3)(4) Logic ground Allowable offset voltage slew rate Power dissipation 8-SOP 200 8-DIP 100 C/W JA Thermal resistance, junction-to-ambient TJ Junction temperature 150 C TSTG Storage temperature 150 C Notes: 2. Mounted on 76.2 x 114.3 x 1.6mm PCB (FR-4 glass epoxy material). 3. Refer to the following standards: JESD51-2: Integral circuits thermal test method environmental conditions - Natural convection JESD51-3: Low effective thermal conductivity test board for leaded surface mount packages 4. Do not exceed PD under any circumstances. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Condition Min. Max. Unit VB High-side floating supply voltage VS+15 VS+20 V VS High-side floating supply offset voltage 6-VDD 600 V VDD Low-side supply voltage 15 20 V VHO High-side (HO) output voltage VS VB V VLO Low-side (LO) output voltage GND VDD V VIN Logic input voltage (IN) GND VDD V TA Ambient temperature -40 125 C (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 5 FAN73832 Half-Bridge Gate-Drive IC Absolute Maximum Ratings VBIAS (VDD, VBS)=15.0V, RDT=20K,TA=25C, unless otherwise specified. The VIN and IIN parameters are referenced to GND. The VO and IO parameters are referenced to VS and COM and are applicable to the respective outputs HO and LO. Symbol Parameter Condition Min. Typ. Max. Unit SUPPLY CURRENT SECTION IQBS Quiescent VBS supply current VIN=0V or 5V 35 90 IQDD Quiescent VDD supply current VIN=0V or 5V, RDT=20K 300 450 ISD(5) Shutdown supply current DT/SD=GND 650 900 IPBS Operating VBS supply current fIN=20kHz, rms value 400 700 IPDD Operating VDD supply current fIN=20kHz, rms value 650 850 ILK Offset supply leakage current VB=VS=600V A 10 POWER SUPPLY SECTION VDDUV+ VBSUV+ VDD and VBS supply under-voltage positive going threshold 10.7 11.6 12.5 V VDDUVVBSUV- VDD and VBS supply under-voltage negative going threshold 10.0 10.8 11.6 V VDDUVH VBSUVH VDD supply under-voltage lockout hysteresis 0.8 V 20 K 3.0 V DEAD-TIME CONTROL SECTION RDTINT VDT Internal dead-time setting resistance Normal voltage at DT RDT=20K GATE DRIVER OUTPUT SECTION VOH High-level output voltage, VBIAS-VO IO=20mA 1.0 VOL Low-level output voltage, VO IO+ Output high short-circuit pulse current VO=0V, VIN=5V with PW<10s 250 350 mA IO- Output low short-circuit pulsed current VO=15V, VIN=0V with PW<10s 500 650 mA VS Allowable negative VS pin voltage for IN signal propagation to HO 0.6 -9.8 -7.0 V V V LOGIC INPUT SECTION (INPUT and SHUTDOWN) VIH Logic "1" input voltage VIL Logic "0" input voltage IIN+ Logic "1" input bias current VIN=5V VIN=0V IIN- Logic "0" input bias current SD+ Shutdown "1" input voltage SD- Shutdown "0" input voltage RPD Input pull-down resistance 2.9 V 50 2.9 1.2 V 100 A 2.0 A 1.2 V V 100 K Note: 5. This parameter guaranteed by design. (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 6 FAN73832 Half-Bridge Gate-Drive IC Electrical Characteristics VBIAS (VDD, VBS)=15.0V, VS=GND, CL=1000pF, RDT=20K and TA = 25C, unless otherwise specified. Symbol tON tOFF Parameter Turn-on propagation delay Conditions Min. VS=0V, RDT=20K 600V(5), Max. 580 730 Turn-off propagation delay VS=0V or 180 230 tR Turn-on rise time CL=1000pF 50 100 tF Turn-off fall time CL=1000pF 30 80 100 180 tSD(5) DT1, DT2 DMT RDT=20K Typ. Shutdown propagation delay Dead-time LO OFF to HO ON & HO OFF to LO ON Dead-time matching Unit ns RDT =20K 300 400 500 ns RDT = 200K 1.20 1.68 2.30 s RDT = 20K 0 60 RDT =200K 0 150 ns Note: 5. These parameters guaranteed by design. (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 7 FAN73832 Half-Bridge Gate-Drive IC Dynamic Electrical Characteristics 11.6 12.0 11.4 VDDUV- ,VBSUV- [V] VDDUV+ ,VBSUV+ [V] 11.8 11.6 11.4 11.2 11.0 10.8 10.6 10.4 11.0 10.2 10.8 -40 11.2 -20 0 20 40 60 80 100 10.0 -40 120 -20 0 Temperature [C] 500 100 400 80 300 40 100 20 0 20 40 60 60 80 100 120 60 200 -20 40 Figure 6. VDD/VBS UVLO (-) vs. Temperature IQBS [A] IQDD [A] Figure 5. VDD/VBS UVLO (+) vs. Temperature 0 -40 20 Temperature [C] 80 100 0 -40 120 -20 0 20 40 60 80 100 120 Temperature [C] Temperature [C] Figure 7. VDD Quiescent Current vs. Temperature Figure 8. VBS Quiescent Current vs. Temperature 1000 800 800 IPBS [A] IPDD [A] 600 600 400 400 200 200 0 -40 -20 0 20 40 60 80 100 0 -40 120 Temperature [C] 0 20 40 60 80 100 120 Temperature [C] Figure 9. VDD Operating Current vs. Temperature Figure 10. VBS Operating Current vs. Temperature (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 -20 www.fairchildsemi.com 8 FAN73832 Half-Bridge Gate-Drive IC Typical Characteristics 100 3.0 2.5 2.0 VIH [V] IIN+ [A] 80 60 1.5 40 1.0 20 0 -40 0.5 -20 0 20 40 60 80 100 0.0 -40 120 -20 0 Temperature [C] Figure 11. Logic Input Current vs. Temperature 2.5 2.5 SD+ BAR [V] 3.0 VIL [V] 2.0 1.5 0.5 0.5 20 40 60 80 100 120 1.5 1.0 0 60 2.0 1.0 -20 40 Figure 12. Logic Input High Voltage vs. Temperature 3.0 0.0 -40 20 Temperature [C] 80 100 0.0 -40 120 -20 0 20 40 60 80 100 120 Temperature [C] Temperature [C] Figure 13. Logic Input Low Voltage vs. Temperature Figure 14. SD Positive Threshold vs. Temperature 3.0 800 2.5 tON [nsec] SD- BAR [V] 600 2.0 1.5 400 1.0 200 0.5 0.0 -40 -20 0 20 40 60 80 100 0 -40 120 Temperature [C] 0 20 40 60 80 100 120 Temperature [C] Figure 15. SD Negative Threshold vs. Temperature Figure 16. Turn-on Delay Time vs. Temperature (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 -20 www.fairchildsemi.com 9 FAN73832 Half-Bridge Gate-Drive IC Typical Characteristics (Continued) 500 300 DT1, RDT= 20k [nsec] tOFF [nsec] 250 200 150 100 450 400 350 50 0 -40 -20 0 20 40 60 80 100 300 -40 120 -20 0 Figure 17. Turn-off Delay Time vs. Temperature 60 80 100 120 2.0 2.2 1.6 Deadtime [S] DT1, RDT= 200k [nsec] 40 Figure 18. Dead--Time (RDT=20k) vs. Temperature 2.4 2.0 1.8 1.6 1.2 0.8 0.4 1.4 1.2 -40 20 Temperature [C] Temperature [C] -20 0 20 40 60 80 100 0.0 20 120 40 60 80 100 120 140 160 180 200 RDT [kohm] Temperature [C] Figure 19. Dead Time (RDT=200k) vs. Temperature Figure 20. RDT vs. Dead-Time -6 VS [V] -8 -10 -12 -14 -40 -20 0 20 40 60 80 100 120 Temperature [C] Figure 21. Allowable Negative VS Voltage for Signal Propagation to High Side vs. Temperature (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 10 FAN73832 Half-Bridge Gate-Drive IC Typical Characteristics (Continued) +15V 10F 100nF 10F 100nF 1 IN 2 GND VB 8 HO 7 +15V HO 1nF Control SD 20K 3 DT/SD VS 6 VDD LO 5 4 LO FAN73832 1nF FAN73832 Rev:00 Figure 22. Switching Time Test Circuit IN HO LO DT/SD DT1 Shutdown DT2 DT2 Shutdown DT1 DT1 FAN73832 Rev.00 Figure 23. Input / Output Waveforms IN 50% 50% tOFF 90% tON LO 10% 90% HO tON tOFF 10% FAN73832 Rev.00 Figure 24. Switching Time Waveform Definitions (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 11 FAN73832 Half-Bridge Gate-Drive IC Switching Time Definitions FAN73832 Half-Bridge Gate-Drive IC 50% DT/SD 90% HO or LO tSD FAN73832 Rev.00 Figure 25. Shutdown Waveform Definition 90% HO 10% DT2 DT1 90% LO MDT= |DT1 - DT2| 10% FAN73832 Rev.00 Figure 26. Dead-Time Control Waveform Definition (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 12 1. Normal Operating Consideration 3. Layout Consideration The FAN73832 is a single PWM input, half-bridge, gatedrive IC with programmable dead-time and shutdown functions. For optimum performance of the high- and low-side gate drivers, considerations must be taken during printed circuit board (PCB) layout. The dead-time is set with a resistor (RDT) at the DT/SD pin. The wide dead-time programming range provides the flexibility to optimize drive signal timing for a selection of switching devices (MOSFET or IGBT) and applications. 3.1 Supply Capacitors If the output stages are able to quickly turn-on a switching device with a high value of current, the supply capacitors must be placed as close as possible to the device pins (VDD and GND for the ground-tied supply, VB and VS for the floating supply) to minimize parasitic inductance and resistance. The turn-on time delay circuitry (Dead-Time) accommodates resistor values from 20k to 200k with a dead-time proportional to the RDT resistance. 3.2 Gate Drive Loop If the DT/SD pin voltage decreases below 1.2V in the normal operation, the IC enters shutdown mode. Current loops behave like an antenna, able to receive and transmit noise. To reduce the noise coupling/emission and improve the power switch turn-on and off performances, gate drive loops must be reduced as much as possible. The external dead-time setting resistor (RDT) is at least above 20K for normal operation in typical applications. 2. Under-Voltage Lockout (UVLO) 3.3 Ground Plane The FAN73832 has an under-voltage lockout (UVLO) protection circuit for high- and low-side channels to prevent malfunction when VDD and VBS are lower than the specified threshold voltage. The UVLO circuitry monitors the supply voltage (VDD) and bootstrap capacitor voltage (VBS) antepenult. Ground plane must not be placed under or nearby the high-voltage floating side to minimize noise coupling. (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 13 FAN73832 Half-Bridge Gate-Drive IC Typical Application Information 8-SOP Dimensions are in millimeters (inches) unless otherwise noted.. MIN 0.1~0.25 0.004~0.001 #5 6.00 0.30 0.236 0.012 8 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 MAX0.10 MAX0.004 1.80 MAX 0.071 3.95 0.20 0.156 0.008 5.72 0.225 0.41 0.10 0.016 0.004 #4 1.27 0.050 #8 5.13 MAX 0.202 #1 4.92 0.20 0.194 0.008 ( 0.56 ) 0.022 1.55 0.20 0.061 0.008 0.50 0.20 0.020 0.008 January 2001, Rev. A 8sop225_dim.pdf Figure 27. 8-Lead Small Outline Package (SOP) (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 14 FAN73832 Half-Bridge Gate-Drive IC Mechanical Dimensions FAN73832 Half-Bridge Gate-Drive IC Mechanical Dimensions (Continued) 8-DIP #4 #5 1.524 0.10 0.060 0.004 0.46 0.10 #8 2.54 0.100 9.60 MAX 0.378 #1 9.20 0.20 0.362 0.008 ( 6.40 0.20 0.252 0.008 0.018 0.004 0.79 ) 0.031 Dimensions are in millimeters (inches) unless otherwise noted.. 7.62 0.300 3.30 0.30 0.130 0.012 5.08 MAX 0.200 3.40 0.20 0.134 0.008 0.33 0.013 MIN +0.10 0.25 -0.05 +0.004 0~15 0.010 -0.002 September 1999, Rev B pdip8_dim.pdf Figure 28. 8-Lead Dual In-Line Package (DIP) (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 15 (R) ACEx Across the board. Around the world. ActiveArray Bottomless Build it Now CoolFET CROSSVOLT CTLTM Current Transfer LogicTM DOME 2 E CMOS (R) EcoSPARK EnSigna FACT Quiet SeriesTM (R) FACT (R) FAST FASTr FPS (R) FRFET GlobalOptoisolator GTO (R) PowerTrench Programmable Active Droop (R) QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect ScalarPump SMART START (R) SPM SuperFET SuperSOT-3 SuperSOT-6 SuperSOT-8 TCM (R) The Power Franchise HiSeC i-Lo ImpliedDisconnect IntelliMAX ISOPLANAR MICROCOUPLER MicroPak MICROWIRE MSX MSXPro OCX OCXPro (R) OPTOLOGIC (R) OPTOPLANAR PACMAN POP (R) Power220 (R) Power247 PowerEdge PowerSaver (R) TinyLogic TINYOPTO TinyPower TinyWire TruTranslation PSerDes (R) UHC UniFET VCX Wire TM TinyBoost TinyBuck DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I23 (c) 2006 Fairchild Semiconductor Corporation FAN73832 Rev. 1.0.2 www.fairchildsemi.com 16 FAN73832 Half-Bridge Gate-Drive IC TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com