SD103AWS-V-G, SD103BWS-V-G, SD103CWS-V-G Vishay Semiconductors Small Signal Schottky Diodes Features * The SD103 series is a metal-on-silicon Schottky barrier device which is protected by a PN junction guard ring * The low forward voltage drop and fast switching make it ideal for protection of MOS devices, steering, biasing, and coupling diodes for fast switching and low logic level applications * Other applications are click suppression, efficient full wave bridges in telephone subsets, and blocking diodes in rechargeable low voltage battery systems * For general purpose applications * AEC-Q101 qualified * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 20145 Mechanical Data Case: SOD-323 Weight: approx. 4.0 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box Parts Table Part Ordering code Type marking Remarks SD103AWS-V-G SD103AWS-V-G-18 or SD103AWS-V-G-08 Z6 Tape and reel SD103BWS-V-G SD103BWS-V-G-18 or SD103BWS-V-G-08 Z7 Tape and reel SD103CWS-V-G SD103CWS-V-G-18 or SD103CWS-V-G-08 Z8 Tape and reel Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Peak reverse voltage Part Symbol Value Unit SD103AWS-V-G VRRM 40 V SD103BWS-V-G VRRM 30 V SD103CWS-V-G VRRM 20 IF Forward continuous current Single cycle surge 350 IFSM 10 s square wave mA 2 Ptot Power dissipation V 1) 200 A 1) mW Note 1) Valid provided that electrodes are kept at ambient temperature Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Junction temperature Storage temperature range Symbol Value Unit RthJA 500 1) K/W Tj 125 C Tstg - 55 to + 150 C Note 1) Valid provided that electrodes are kept at ambient temperature ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number 81142 Rev. 1.1, 13-May-11 SD103AWS-V-G, SD103BWS-V-G, SD103CWS-V-G Vishay Semiconductors Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Part Symbol Max. Unit VR = 30 V SD103AWS-V-G IR 5 A VR = 20 V SD103BWS-V-G IR 5 A VR = 10 V SD103CWS-V-G IR 5 A VF 370 mV 600 mV Leakage current IF = 20 mA Forward voltage drop Typ. IF = 200 mA VF VR = 0 V, f = 1 MHz CD 50 pF IF = IR = 50 mA to 200 mA, recover to 0.1 IR trr 10 ns Diode capacitance Reverse recovery time Min. Typical Characteristics Tamb = 25 C unless otherwise specified 1000 1000 IR - Reverse Current (A) I F - Forward Current (mA) Tamb = 125 C 100 10 1 0.1 0.01 0 0.2 0.4 0.6 0.8 75 C 10 50 C 1 25 C 0.1 5 10 15 20 25 30 35 40 45 50 20084 Figure 1. Typical Variation of Forward Current vs. Forward Voltage VR - Reverse Voltage (V) Figure 3. Typical Variation of Reverse Current at Various Temperatures 5 100 tp = 300 ms 4 C D - Diode Capacitance (pF) I F - Forward Current (A) 100 C 0.01 0 1.0 VF - Forward Voltage (V) 18488 100 duty cycle = 2 % 3 2 1 0 0 18489 0.5 1.0 1 1.5 VF - Forward Voltage (V) Figure 2. Typical High Current Forward Conduction Curve 10 0 18491 10 20 30 40 50 VR - Reverse Voltage (V) Figure 4. Diode Capacitance vs. Reverse Voltage For technical questions within your region, please contact one of the following: Document Number 81142 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.1, 13-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 2 SD103AWS-V-G, SD103BWS-V-G, SD103CWS-V-G Vishay Semiconductors VR - Reverse Voltage (V) 50 40 100 mA 30 200 mA I F = 400 mA 20 10 0 18492 0 100 200 Tamb - Ambient Temperature (C) Figure 5. Blocking Voltage Deration vs. Temperature at Various Average Forward Currents 0.1 (0.004) max. 0 to 8 0.15 (0.006) 0.10 (0.004) 0.2 (0.008) 0.8 (0.031) 1.15 (0.045) Package Dimensions in millimeters (inches): SOD-323 0.40 (0.016) 0.25 (0.010) 1.95 (0.077) 1.60 (0.063) 2.50 (0.098) 1.1 (0.043) 2.85 (0.112) 1.5 (0.059) 0.40 (0.016) 0.20 (0.008) Cathode bar Foot print recommendation: Document no.:S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 5 - Date: 23.Sept.2009 17443 1.6 (0.063) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number 81142 Rev. 1.1, 13-May-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000