Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP 40
Circular connectors with threaded joint acc. to IEC 61076-2-106, IP 40
Connecteurs circulaires avec verrouillage à vis suivant CEI 61076-2-106, IP 40
www.lumberg.com 11/2012
03 03
WKV WKV
Bestellbezeichnung
Designation
Désignation
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Kabeldurchmesser
Cable diameter
Diamètre de cable
Bemessungsstrom
Rated current
Courant assigné
Bemessungsspannung2
Rated voltage2
Tension assignée2
Prüfspannung
Test voltage
Tension d’éssai
Isolationswiderstand
Insulation resistance
Résistance d’isolement
Kontaktkapazität
Contact capacitance
Capacité de
contact
mm2mm A V AC kV AC eff. GΩpF
WKV 30 3 50 0,75 4–6 5 250 2 > 10 ~ 2
WKV 40 4 50 0,75 4–6 5 250 2 > 10 ~ 2
WKV 50 5 50 0,75 4–6 5 60 1 > 10 ~ 3
WKV 50/6 5 50 0,75 4–6 5 250 2 > 10 ~ 2
WKV 60 6 50 0,75 4–6 5 250 2 > 10 ~ 2
WKV 70 7 50 0,75 4–6 5 250 2 > 10 ~ 2
WKV 71 7 50 0,75 4–6 5 60 1 > 10 ~ 3
WKV 80 8 50 0,75 4–6 5 60 1 > 10 ~ 3
WKV 81 8 50 0,75 4–6 5 60 1 > 10 ~ 3
WKV 120 12 50 0,25 4–6 3 60 1 > 10 ~ 3
Verpackung: im Karton
Packaging: in a cardboard box
Emballage: dans un carton
Socket acc. to IEC 61076-2-106, IP 40, angular, with threaded
joint, ground contact, bend protection and solder terminals
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF
Contact bush 3 to 8 poles CuZn, silvered and flash gilded
Contact bush 12 poles CuZn, pre-nickeled and gilded
Grounding spring CuZn, pre-nickeled and tinned
Housing PC
Knurled nut CuZn, nickeled
Bend protection TPE
Strain relief steel, nickeled
Sleeve steel, zinced
Screw stainless steel/steel, chromated
3. Mechanical data
Insertion force/contact 3–8 poles1< 5.0 N
Insertion force/contact 12 poles2< 5.0 N
Withdrawal force/contact 3–8 poles1> 1.2 N
Withdrawal force/contact 12 poles2> 0.9 N
Mating with plugs 033098, 033099, SFV, SGR,
SGV, SV, WSV
plugs according to IEC 61076-2-106
and IEC 60130-9
Protection3IP 40
For further information see table
4. Electrical data
Contact resistance ≤5 mΩ
For further information see table
1measured with a polished steel pin, nominal thickness 1.5 mm
2measured with a polished steel pin, nominal thickness 1.0 mm
3according to DIN EN 60529,
only in locked position with a proper counterpart
4according to VDE 0110/IEC 60664
Connecteur femelle suivant CEI 61076-2-106, IP 40, angu-
laire, avec verrouillage à vis, contact de masse, protecteur
contre pliage et connexion par soudure
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isolant PA GF
Prise de contact 3 à 8 pôles CuZn, argenté et doré flash
Prise de contact 12 pôles CuZn, sous-nickelé et doré
Ressort de terre CuZn, sous-nickelé et étamé
Boîtier PC
Écrou moleté CuZn, nickelé
Protection contre pliage TPE
Décharge de traction acier, nickeled
Douille acier, zingué
Vis acier inoxydable/acier, chromaté
3. Caractéristiques mécaniques
Force d’insertion/contact 3–8 pôles1< 5,0 N
Force d’insertion/contact 12 pôles2< 5,0 N
Force de séparation/contact 3–8
pôles
1
> 1,2 N
Force de séparation/contact 12
pôles
2
> 0,9 N
Raccordement avec connecteurs mâles 033098, 033099,
SFV, SGR, SGV, SV, WSV
connecteurs mâles suivant
CEI 61076-2-106 et CEI 60130-9
Protection3IP 40
Pour plus de détails, voir tableau
4. Caractéristiques électriques
Résistance de contact ≤5 mΩ
Pour plus de détails, voir tableau
1mesurée avec une tige d’acier poli, épaisseur nominale 1,5 mm
2mesurée avec une tige d’acier poli, épaisseur nominale 1,0 mm
3suivant DIN EN 60529,
uniquement à l’état verrouillé avec un propre pendant
4suivant VDE 0110/CEI 60664