M83401, C83401 www.vishay.com Vishay Dale Thin Film Thin Film Resistor Network Military, MIL-PRF-83401 Qualified, Type RZ070, RZ080, RZ090, RZ210, RZ220, RZ230, Single-In-Line SIP FEATURES Qualified to meet MIL-PRF-83401 characteristic "R", "V", and "H" These resistor networks are available in 6 pins, 8 pins, and 10 pins in schematic C and G styles. Custom circuits are not available. Schematic C and G only. They incorporate Vishay Dale Thin Film's patented passivated nichrome film to give superior performance on temperature coefficient of resistance, thermal stability, noise, voltage coefficient, power handling and resistance stability. The leads are attached to the metallized alumina substrates by Thermo-Compression bonding. The body is molded thermoset plastic with gold plated copper alloy leads. This product will outperform all of the requirements of characteristic "R", "V", and "H" of MIL-PRF-83401. * * * * * * * * MIL-PRF-83401 qualified (cage code 57489) Low Profile 0.195" (4.95 mm seated height) Characteristics R ( 25 ppm), H, V, K, and M Hot fused tin/lead 60/40 solder dipped Rugged molded low profile construction with standoff 100 % screened to groups A MIL-PRF-83410 testing Tolerances to 0.1 % Isolated and bussed (schematic C and G) TYPICAL PERFORMANCE ABSOLUTE TRACKING 25 5 TCR ABSOLUTE RATIO 0.1 0.1 to 0.05 TOL. SCHEMATIC C Schematic (Pin 1 Common) 1 2 3 4 G Schematic (Isolated) N 1 2 3 4 N STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio SPECIFICATIONS Passivated nichrome 6, 8, 10 100 to 200 k per resistor 25 ppm/C to 300 ppm/C 5 ppm/C 0.1 % to 5.0 % 0.1 % to R1 0.06 mW to 0.120 mW (per element typical at + 25 C) (1) 0.18 W to 1.08 W (1) R 0.05 % R 0.015 % < 0.1 ppm/V 100 V - 55 C to + 125 C - 55 C to + 125 C < - 30 dB < 0.08 V/C R 0.01 % R 0.002 % CONDITIONS Tolerance dependent (2) - 55 C to + 125 C (1) - 55 C to + 125 C + 25 C + 25 C Maximum at + 70 C Maximum at + 70 C 2000 h at + 70 C 2000 h at + 70 C 1 year at + 25 C 1 year at + 25 C Notes (1) Consult MIL-PRF-83401 (2) "H" characteristic 100 to 100 k resistance range at 0.1% best "R" characteristic 250 to 100 k resistance range at 0.1% best "R" characteristic 250 to 200 k resistance range at 1% best Revision: 01-Mar-13 Document Number: 60116 61 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M83401, C83401 www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters Part Number L Indicates Pin 1 Date Code Vishay Logo G INCHES MILLIMETERS A 0.035 0.89 B 0.040 1.02 C 0.100 0.005 non-accum. 2.54 0.13 D 0.019 0.006 typical 0.48 0.15 E E 0.187 0.010 4.75 0.25 F 0.135 3.43 F G 0.095 2.41 A B H C DIMENSION D H 0.012 0.004 0.31 0.10 L (6 Pins) 0.583 - 0.023/+ 0.01 14.81 - 0.584/+ 0.254 L (8 Pins) 0.783 - 0.023/+ 0.01 19.89 - 0.584/+ 0.254 L (10 Pins) 0.983 - 0.023/+ 0.01 24.97 - 0.584/+ 0.254 CONSTRUCTION High Purity Alumina Substrate Sputtered Film System Gold Plated Copper Leads Gold to Gold Thermo-Compression Bond (No Internal Solder) MECHANICAL SPECIFICATIONS Resistive Element TAMELOX passivated nichrome Substrate Material Alumina Body Molded Epoxy Terminals Copper alloy Plating/Solder Nickel/gold/Sn63 fussed POWER DERATING C Schematic (Pin 1 Common Characteristic H) G Schematic (Isolated Characteristic H) Low Profile Low Profile 0.84 0.60 0.54 10 Pin Package Power Rating (W) Power Rating (W) 1.08 8 Pin Package 6 Pin Package 10 Pin Package (Char. R and V) 0.60 0.48 0.36 0.30 Single Resistor Single Resistor (Char. R and V) - 55 + 25 0 0.12 0.06 Revision: 01-Mar-13 0.12 0.06 + 70 + 125 + 150 Ambient Temperature C - 55 10 Pin Package 8 Pin Package 6 Pin Package 10 Pin Package (Char. R and V) Single Resistor Single Resistor (Char. R and V) 0 + 25 + 70 + 125 + 150 Ambient Temperature C Document Number: 60116 62 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M83401, C83401 www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340107H1000BCUF M 8 3 4 0 1 0 7 H 1 0 0 0 B C U F V MODEL (5 digits) SCHEMATIC (2 digits) CHARACTERISTIC (1 digits) RESISTANCE (4 digits) TOLERANCE (1 digits) SCHEMATIC (1 digits) PACKAGING (2 digits) VENDOR (1 digits) M83401 Single in-line resistor network low profile 07 = 6 pin 08 = 8 pin 09 = 10 pin H = 50 ppm/C V = 50 ppm/C 5 ppm/C track R = 25 ppm/C 5 ppm/C track K = 100 ppm/C M = 300 ppm/C First 3 digits are significant figures and the last digit specifies the number of zeros to follow. (100 to 100 k) Examples: 1000 = 100 1001 = 1000 B = 0.1 % (3) D = 0.5 % (3) F=1% G=2% J=5% C= Pin 1 common G= Isolated resistors UF = Tubed UI = 100 min, 1 mult (item single lot date code) UP = 100 min.,1 mult (package unit single lot date) V (2) = Vishay Dale Thin Film 21 = 6 pin (1) 22 = 8 pin (1) 23 = 10 pin (1) C83401 Non burn in screened network Notes (1) No internal solder (2) "V" is not required for characteristics R, H, and V, it is only required for K and M. Characteristics tolerance equal to or greater than 1 %." (3) "H" characteristic 100 to 100 k resistance range at 0.1% best "R" characteristic 250 to 100 k resistance range at 0.1% best "R" characteristic 250 to 200 k resistance range at 1% best MODEL M83401 C83401 SCHEMATIC 07 = 6 pin (RZ070) 08 = 8 pin (RZ080) 09 = 10 pin (RZ090) 21 = 6 pin (RZ210) 22 = 8 pin (RZ220) 23 = 10 pin (RZ230) CHARACTERISTIC TOLERANCE H = 50 ppm/C 100 to 100K B, D, F, G, J V = 50 ppm/C/ 5 ppm/C track 250 to 100K B, D, F, G, J 250 to 200K F, G, J R = 25 ppm/C 5 ppm/C track 250 to 100K B, D, F, G, J 250 to 200K F, G, J 100 to 100K B, D, F, G, J K = 100 ppm/C M = 300 ppm/C Revision: 01-Mar-13 RESISTANCE RANGE SCHEMATIC C, G Document Number: 60116 63 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000