M8340108K1003BGUF - VISHAY - Datasheet.Directory

M83401, C83401

www.vishay.com Vishay Dale Thin Film

Revision: 01-Mar-13 61 Document Number: 60116

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thin Film Resistor Network Military, MIL-PRF-83401 Qualified,

Type RZ070, RZ080, RZ090, RZ210, RZ220, RZ230,

Single-In-Line SIP

Qualified to meet MIL-PRF-83401 characteristic “R”, “V”, and “H”

These resistor networks are available in 6 pins, 8 pins, and

10 pins in schematic C and G styles. Custom circuits are not

available. Schematic C and G only. They incorporate Vishay

Dale Thin Film’s patented passivated nichrome film to give

superior performance on temperature coefficient of

resistance, thermal stability, noise, voltage coefficient,

power handling and resistance stability. The leads are

attached to the metallized alumina substrates by

Thermo-Compression bonding. The body is molded

thermoset plastic with gold plated copper alloy leads. This

product will outperform all of the requirements of

characteristic “R”, “V”, and “H” of MIL-PRF-83401.

FEATURES

• MIL-PRF-83401 qualified (cage code 57489)

• Low Profile 0.195" (4.95 mm seated height)

• Characteristics R (± 25 ppm), H, V, K, and M

• Hot fused tin/lead 60/40 solder dipped

• Rugged molded low profile construction with standoff

• 100 % screened to groups A MIL-PRF-83410 testing

• Tolerances to 0.1 %

• Isolated and bussed (schematic C and G)

TYPICAL PERFORMANCE

SCHEMATIC

Notes

(1) Consult MIL-PRF-83401

(2) “H” characteristic 100  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 200 k resistance range at 1% best

ABSOLUTE TRACKING

TCR 25 5

ABSOLUTE RATIO

TOL. 0.1 0.1 to 0.05

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome -

Pin/Lead Number 6, 8, 10 -

Resistance Range 100  to 200 k per resistor Tolerance dependent (2)

TCR: Absolute ± 25 ppm/°C to 300 ppm/°C - 55 °C to + 125 °C (1)

TCR: Tracking ± 5 ppm/°C - 55 °C to + 125 °C

Tolerance: Absolute ± 0.1 % to ± 5.0 % + 25 °C

Tolerance: Ratio ± 0.1 % to R1+ 25 °C

Power Rating: Resistor 0.06 mW to 0.120 mW (per element typical at + 25 °C) (1) Maximum at + 70 °C

Power Rating: Package 0.18 W to 1.08 W (1) Maximum at + 70 °C

Stability: Absolute R ± 0.05 % 2000 h at + 70 °C

Stability: Ratio R ± 0.015 % 2000 h at + 70 °C

Voltage Coefficient < 0.1 ppm/V -

Working Voltage 100 V -

Operating Temperature Range - 55 °C to + 125 °C -

Storage Temperature Range - 55 °C to + 125 °C -

Noise < - 30 dB -

Thermal EMF < 0.08 μV/°C -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C

Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C

C Schematic (Pin 1 Common)

234 N 1

G Schematic (Isolated)

23 4 N

M83401, C83401

www.vishay.com Vishay Dale Thin Film

Revision: 01-Mar-13 62 Document Number: 60116

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

POWER DERATING

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION INCHES MILLIMETERS

A 0.035 0.89

B 0.040 1.02

C 0.100 ± 0.005 non-accum. 2.54 ± 0.13

D 0.019 ± 0.006 typical 0.48 ± 0.15

E 0.187 ± 0.010 4.75 ± 0.25

F 0.135 3.43

G 0.095 2.41

H 0.012 ± 0.004 0.31 ± 0.10

L (6 Pins) 0.583 - 0.023/+ 0.01 14.81 - 0.584/+ 0.254

L (8 Pins) 0.783 - 0.023/+ 0.01 19.89 - 0.584/+ 0.254

L (10 Pins) 0.983 - 0.023/+ 0.01 24.97 - 0.584/+ 0.254

CONSTRUCTION

MECHANICAL SPECIFICATIONS

Resistive Element TAMELOX passivated nichrome

Substrate Material Alumina

Body Molded Epoxy

Terminals Copper alloy

Plating/Solder Nickel/gold/Sn63 fussed

C Schematic (Pin 1 Common Characteristic H) G Schematic (Isolated Characteristic H)

Indicates

Pin 1

Vishay

Logo

Part

Number

Date

Code

High Purity

Alumina Substrate

Gold Plated

Copper Leads

Gold to Gold

Thermo-Compression Bond

(No Internal Solder)

Sputtered

Film System

Low Profile

1.08

0.12

10 Pin Package

8 Pin Package

6 Pin Package

Single Resistor

- 55 + 25 + 70 + 125 + 150

0.60

0.84

Power Rating (W)

Ambient Temperature °C

0.06 Single Resistor

(Char. R and V)

0.54 10 Pin Package

(Char. R and V)

0.60

0.48

0.36

0.12

10 Pin Package

8 Pin Package

6 Pin Package

Single Resistor

Low Profile

- 55 0 + 25 + 70 + 125 + 150

Power Rating (W)

Ambient Temperature °C

0.06

0.30 10 Pin Package

(Char. R and V)

Single Resistor

(Char. R and V)

M83401, C83401

www.vishay.com Vishay Dale Thin Film

Revision: 01-Mar-13 63 Document Number: 60116

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) No internal solder

(2) “V" is not required for characteristics R, H, and V, it is only required for K and M. Characteristics tolerance equal to or greater than 1 %."

(3) “H” characteristic 100  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 100 k resistance range at 0.1% best

“R” characteristic 250  to 200 k resistance range at 1% best

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M8340107H1000BCUF

MODEL

(5 digits)

SCHEMATIC

(2 digits)

CHARACTERISTIC

(1 digits)

RESISTANCE

(4 digits)

TOLERANCE

(1 digits)

SCHEMATIC

(1 digits)

PACKAGING

(2 digits)

VENDOR

(1 digits)

M83401

Single

in-line

resistor

network

low profile

C83401

Non burn in

screened

network

07 = 6 pin

08 = 8 pin

09 = 10 pin

21 = 6 pin (1)

22 = 8 pin (1)

23 = 10 pin (1)

H = 50 ppm/°C

V = 50 ppm/°C

5 ppm/°C track

R = 25 ppm/°C

5 ppm/°C track

K = 100 ppm/°C

M = 300 ppm/°C

First 3 digits

are significant

figures and the

last digit specifies

the number of

zeros to follow.

(100  to 100 k)

Examples:

1000 = 100 

1001 = 1000 

B = 0.1 % (3)

D = 0.5 % (3)

F = 1 %

G = 2 %

J = 5 %

C =

Pin 1

common

G =

Isolated

resistors

UF =

Tubed

UI =

100 min, 1 mult

(item single

lot date code)

UP =

100 min.,1 mult

(package unit

single lot date)

V (2) =

Vishay Dale

Thin Film

MODEL SCHEMATIC CHARACTERISTIC RESISTANCE

RANGE TOLERANCE SCHEMATIC

M83401

C83401

07 = 6 pin (RZ070)

08 = 8 pin (RZ080)

09 = 10 pin (RZ090)

21 = 6 pin (RZ210)

22 = 8 pin (RZ220)

23 = 10 pin (RZ230)

H = 50 ppm/°C 100 to 100K B, D, F, G, J

C, G

V = 50 ppm/°C/

5 ppm/°C track

250 to 100K B, D, F, G, J

250 to 200K F, G, J

R = 25 ppm/°C

5 ppm/°C track

250 to 100K B, D, F, G, J

250 to 200K F, G, J

K = 100 ppm/°C 100 to 100K B, D, F, G, J

M = 300 ppm/°C

0107 100HM3 BCU0FV8 4

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.