Lighting Systems Electronic ballast for HID lamps High quality PET film capacitors for filtering and voltage stabilization in the DC/DC converters of the ballast. 18 PET metallized film capacitors in plastic case (MKT) B32522...24 series (LS 15 to LS 27,5 mm) Polyethylene terephthalate C = 0,22...2,2 F V = 400 V Flame-retardant encapsulation (UL 94V-0) Epoxy resin sealing h 6 -1 b e o d1 KMK0089-9 Advantages High reliability High thermal stability (-55C...+125C) High pulse strength Also available as SMD version: PEN film capacitors B32840 series PET film capacitors B32540 series For further information refer to our data book "Film Capacitors", edition 2001. EPCOS AG Ballast for HID lamps B32522...24 Lead spacing e (mm) VR Vdc CR F Ordering code Max. dimensions b x h x l (mm) 15,0 15,0 15,0 15,0 22,5 22,5 27,5 400 400 400 400 400 400 400 0,22 0,33 0,47 0,68 1,0 1,5 2,2 B32522-A6224-K590 7,0 x 12,5 B32522-A6334-K591 8,5 x 14,5 B32522-A6474-K592 9,0 x 17,5 B32522-A6684-K593 9,0 x 17,5 B32523-A6105-K594 10,5 x 16,5 B32523-A6155-K595 10,5 x 16,5 B32524-A6225-K596 12,5 x 21,5 x x x x x x x For further technical information see table 5 (below). 18,0 18,0 18,0 18,0 26,5 26,5 31,5 o d1 (mm) Vrms Vac dV/dt V/s k0 V2 /s 0,8 0,8 0,8 0,8 0,8 0,8 0,8 200 200 200 200 200 200 200 125 125 125 12,5 7,0 7,0 5,0 100 000 100 000 100 000 10 000 5 600 5 600 4 000 Capacitance tolerance: 20%=M, 10%=K, 5%=J Taped version in Ammo pack and reel packing also available. Technical data Operating temperature range (see voltage endurance test) -55C...+125C Damp heat test IEC 60068-2,3 56 days / 40C / 93% relative humidity DC test voltage IEC 60068-2 1,6 * VR , 2 s Voltage endurance test IEC 60068-2,2 2000 h / 100C / 0,8 * VR 1000 h / 125C / 0,5 * VR Dissipation factor tan (in 10 -3) at 20C (maximal values) at 1 kHz at 10 kHz at 100 kHz CR 0,1 F 8 15 30 CR > 0,1 F 10 -- -- Insulation resistance R is or time constant = CR * R is at 20C (minimal values) VR 100 V VR 250 V CR 0,33 F 3750 M 7500 M CR > 0,33 1250 s 2500 s Rapid change of temperature IEC 60068-2,14 500 cycles / -40C...+125C / 10 s between maximal and minimal temperature / 10 min. at maximal or minimal temperature Sealing after thermal shock IEC 60068-2,17 After thermal shock test / 5 bar / 2 h Charge and discharge IEC 60384 -2, 4.13 10 000 cycles / VR / 100C / tc =10 ms / td = 3 ms Vibration IEC 60068-2,6 Sine wave /10...500 Hz /10 g / 1 oct.per min./2 h in each of 3 areas (special vibration profiles can be checked on request) Table 5 EPCOS AG 19