(Standard type) TESTING (Standard type) PhotoMOS RELAYS HE (High-function Economy) Type 1- Channel (Form B) Type FEATURES 8.80.05 .346.002 4. Controls various types of load such as relays, motors, lamps and solenoids. 5. Eliminates the need for a power supply to drive the power MOSFET A power supply used to drive the power MOSFET is unnecessary because of the built-in optoelectronic device. This results in easy circuit design and small PC board area. 6. Low thermal electromotive force (Approx. 1 V) (Basic insulation) 7. Reinforced insulation 5,000 V type also available. More than 0.4 mm .016 inch internal insulation distance between inputs and outputs. Conforms to IEC950 (reinforced insulation). 1. Form B (Normally-closed) type Has been realized thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method. 6.40.05 .252.002 , 3.90.2 .154.008 6.40.05 .252.002 3.60.2 .142.008 Cross section of the normally-closed type of power MOS Passivation membrane Intermediate Source electrode Gate electrode insulating membrane , , 8.80.05 .346.002 N+ P+ N+ N+ P+ N+ Gate oxidation membrane N- Drain electrode mm inch N+ 2. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 3. High sensitivity, low ON resistance Can control a maximum 0.15 A load current with a 5 mA input current. Low ON resistance of 16 (AQV454). Stable operation because there are no metallic contact parts. TYPICAL APPLICATIONS * Security equipment * High-speed inspection machines * Measuring instruments * Telephone equipment * Sensors TYPES Output rating* Type I/O isolation 1,500 V AC AC/DC Reinforced 5,000 V AC Part No. Through hole terminal Load voltage Load current 250 V 200 mA 400 V 150 mA Surface-mount terminal Tube packing style AQV453 AQV454 AQV453A AQV454A AQV454H AQV454HA Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQV453AX AQV453AZ AQV454AX AQV454AZ AQV454HAX AQV454HAZ Packing quantity Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. * Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X"and "Z" are omitted from the seal. 575 AQV45 RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Type of Symbol connection IF Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Input VR IFP Pin VL Continuous load current IL Output Peak load current IPEAK Power dissipation Total power dissipation I/O isolation voltage POUT PT Viso Temperature limits AQV453(A) A B C AQV454(A) AQV454H(A) 50 mA 3V 1A 75 mW f = 100 Hz, Duty factor = 0.1% 250 V 0.2 A 0.3 A 0.4 A 400 V 0.15 A 0.18 A 0.25 A 0.6 A 0.5 A 360 mW 410 mW 1,500 V AC Remarks A connection: Peak AC, DC B,C connection: DC A connection: 100 ms (1 shot), VL = DC 5,000 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F Non-condensing at low temperatures 2. Electrical characteristics (Ambient temperature: 25C 77F) Type of Symbol connection Item Typical Maximum Minimum LED reverse (ON) current Typical Typical LED dropout voltage Maximum LED operate (OFF) current Input IFoff -- IFon -- VF -- Ron A Ron B Ron C ILeak Switching speed Transfer characteristics Reverse (ON) time* I/O capacitance Initial I/O isolation resistance Minimum Note: Recommendable LED forward current. Standard type: IF= 5 mA Reinforced type: IF= 5 to 10 mA *Operate/Reverse time IL = Max. IF = 5 mA 16 2.7 6.3 6.3 4 8 8 1.4 3.1 3.1 2 4 4 -- 1 A 10 A 10 A IF= 5 mA VL= Max. Toff -- 1.52 ms 3 ms 1.2 ms 2.0 ms 1.8 ms 3.0 ms IF = 0 mA 5 mA IL = Max. Ton -- 0.4 ms 1 ms 0.36 ms 1.0 ms 0.4 ms 1.0 ms IF = 5 mA 0 mA IL = Max. Ciso -- 1.3 pF 3 pF f = 1 MHz VB = 0 Riso -- 1,000 M 500 V DC Maximum Typical Maximum Typical Maximum Typical Maximum IL = Max. 16 Typical Operate (OFF) time* 0.9 mA 1.4 mA 3 mA 0.4 mA 0.9 mA 0.8 mA 1.3 mA 1.14 V (1.25V at IF=50 mA) 1.5 V 8 Maximum Maximum 1 mA Remarks 10.5 Typical Off state leakage current AQV454H(A) 10.5 Maximum Output AQV454(A) 5.5 Typical On resistance AQV453(A) IF = 0 mA IL= Max. Within 1 s on time IF = 0 mA IL= Max. Within 1 s on time IF = 0 mA IL = Max. Within 1 s on time For type of connection, see Page 445. Input Output 10% 90% Toff 576 Ton For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 445. For Cautions for Use, see Page 449. AQV45 REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 0 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 16 200 5 AQV453 AQV454H 150 AQV454(H) 100 Operate (OFF) time, ms On resistance, Load current, mA AQV454(H) 14 12 10 AQV453 50 8 0 -40 -20 0 20 40 60 0 8085100 4 AQV454 AQV453 3 2 1 -40 -20 Ambient temperature, C 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperautre, C 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 2.0 1.5 AQV454, AQV453 1.0 0.5 5 5 4 AQV454H 3 2 AQV454 AQV453 1 LED reverse (ON) current, mA LED operate (OFF) current, mA Reverse (ON) time, ms 2.5 4 AQV454H 3 2 AQV454 1 AQV454H -40 -20 0 20 40 60 0 8085 -40 -20 0 20 40 60 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 200 Current, mA LED dropout voltage, V 1.5 1.4 1.3 -3 1.2 -2 -1 0 20 40 60 -20 0 20 40 60 80 Ambient temperautre, C 9. Off state leakage current Sample: AQV454; Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 80 40 0 1 2 3 Voltage, V 10-3 10-6 10-9 -120 AQV454(H) -40 -20 120 -80 1.0 0 -40 AQV453 160 0 -40 50mA 30mA 20mA 10mA 5mA 1.1 0 8085 Ambient temperautre, C Ambient temperautre, C Off state leakage current, A 0 -160 10-12 -200 80 85 0 Ambient temperautre, C 20 40 60 80 100 Load voltage, V 10. LED forward current vs. operate (OFF) time characteristics 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F 1.0 8 AQV454H 6 4 2 0 0.6 AQV454H 0.4 AQV454, AQV453 20 30 40 300 200 100 AQV453 0 50 LED forward current, mA 9/1/2000 0.8 0.2 AQV454, AQV453 10 400 Output capacitance, pF Reverse (ON) time, ms Opperate (OFF) time, ms 10 60 10 20 30 40 50 LED forward current, mA 60 0 0 AQV454(H) 10 20 30 40 50 Applied voltage, V All Rights Reserved, (c) Copyright Matsushita Electric Works, 577 Ltd. Go To Online Catalog