CX2001 0.6 m CMOS Fast-Turn ASIC Product Family Introduction The CX2001 is a fast-turn, 0.6m CMOS triple-metal module array product. The CX2001 features density ranges from 23k to 100k usable gates, up to 96k bits of configurable embedded RAM / ROM, and up to 556 I/Os. Using Chip Express' proprietary architecture, fast-turn delivery of prototypes and production is achieved. Seamless transitions from prototypes through low- and highvolume production permit scalable management of production. Prototypes - Production-Grade Five-day lead-time is available for the shipment of five (5) packaged and fully tested prototypes. Low-Volume Production Three-week lead-time is available for low-volume module array production. Customization is done using single-mask, single-wafer processing. High-Volume Production Sixteen-week lead-time is available for highvolume production. Features 0.6m CMOS TLM process 3.3V or 5V operation with mixed mode I/O 5V tolerance with reference voltage PCI compliant outputs (3.3V / 5V) Power dissipation: * 2.6W / MHz / Gate @ 5V * 1.1W / MHz / Gate @ 3.3V u 800 MHz maximum flip-flop toggle rate u Analog PLL operating frequency up to 250 MHz u u u u u u Embedded memory * Configurable as single-port RAM, dual-port RAM or ROM * Up to 96k bits / 24 individual memory configurations * Worst-case performance: 200 MHz @ 5V; 150 MHz @ 3.3V * Fully static, synchronous RAM * Word depth: programmable to 4096 bits * Word width: programmable 1-64 bits CX2001 Product Master Slice CX2041 CX2081 CX2121 CX2201 _____________ 1 Estimated Usable Gates 23k 50k 75k 100k Embedded Memory Bits 24k 32k 40k 96k Max I/O including both signals and power / ground. CEC016 (Rev. C, 2/16/01) 1 Max Memory Instantiations 6 8 10 24 Max I/O1 260 380 452 556 Max APLL 2 4 4 4 Cell Library u u u u u Synopsys DC and DesignWare support Low power flip-flops Built-in scan MUX in flip-flops 26 simple gates; 36 complex gates 31 flip-flops u u u u 24 latches Multiplexers, decoders Tristate / drive cells 1280 input / output cells Power Pin Assignment power pins with output drive requirements or match specific pin-out when replacing existing devices. All I/O cells are programmable as VDD, VSS, input, output, or bi-directional. This flexibility allows the user to properly ratio Input & Output Bi-Directional Cells The CX2001 library contains a large selection of input, output, and bi-directional cells that accommodate a wide range of designs. Input cells can be personalized with internal pull-up or pull-down resistors and with or without hysteresis. Output cells include slew rate control, current drive capability from 2mA to 12mA, as well as N channel and P channel open drains. If required, outputs can be used in parallel to enable increased drive capability. Each I/O can be programmed independently for 3.3V or 5V. Recommended Operating Conditions Absolute Maximum Ratings Symbol VDD VDDIO (3.3V) VDDIO (5V) VIN TJ TSTG TSOL Description Supply voltage I/O supply voltage I/O supply voltage DC input voltage range Junction temperature Storage temperature Soldering lead temperature (10 seconds) Min 0 -0.3 0 VSS -0.3 --65 -- Max 7.0 4.6 5.5 VDDWELL +0.32 150 150 210 Unit V V V V C C C Recommended Operating Conditions Symbol Description VDD Supply voltage (3.3V) VDD Supply voltage (5V) CEC016 (Rev. C, 2/16/01) Commercial (0C TJ 100C) Industrial (-40C TJ 115C) Military (-55C TJ 125C) Commercial (0C TJ 100C) Industrial (-40C TJ 115C) Military (-55C TJ 125C) 2 Min 3.0 3.0 3.0 4.75 4.75 4.5 Max 3.6 3.6 3.6 5.25 5.25 5.5 Units V V V V V V Symbol VIH VIL Tin Description TTL inputs Input high voltage CMOS inputs TTL inputs Input low voltage CMOS inputs Input signal transition time Min 2.0 0.7 VDD 0 0 -- Max VDD VDD 0.8 0.3 VDD 10 Units V V V V nS Min 2.45 0.7 VDD ---10 --- Max --0.45 0.3 VDD 10 --- Units V V V V A Note 1 Note 1 DC Characteristics Over Operating Conditions Symbol Description VOH Output high voltage VOL Output low voltage IIN Input leakage current CIN Input capacitance TTL outputs CMOS outputs TTL outputs CMOS outputs QFP packages BGA packages Note 1: Please refer to current packaging information on our website (www.chipexpress.com/design). For More Info Chip Express Corporation 2323 Owen Street Santa Clara, CA 95054 Phone: (408) 988-2445 Fax: (408) 988-2449 Toll Free: 1-800-95-CHIPX Email: moreinfo@chipx.com www.chipexpress.com _____________ 2 VDDWELL is 3.3V or 5V depending on the highest voltage in the system. CEC016 (Rev. C, 2/16/01) 3