B39162B8813P810 - RF 360 - Datasheet.Directory

RF360 Europe GmbH

A Qualcomm – TDK Joint Venture

RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of

RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.

is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to

EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.

RF360 Europe GmbH, Anzinger Str. 13, München, Germany

SAW Components

SAW GPS + COMPASS + GLONASS

filter

Series/type:

Ordering code:

DCN:

B8813

B39162B8813P810

80-PA243-26 Rev. A

Date: February 3, 2017

Version: 2.2

These materials, including the information contained herein, may be used only for informational purposes by

the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or

the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)

or information contained herein without notice. The materials and information are provided on an AS IS basis,

and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or

implied, with respect to the materials, or any output or results based on the use, application, or evaluation of

such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,

copyrights or any other intellectual property rights or other rights of third parties.

No use of this documentation or any information contained herein grants any license, whether express, implied,

by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned

by QUALCOMM Incorporated or any of its subsidiaries.

Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to

others without the express written permission of RF360 Europe GmbH.

Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States

and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be

trademarks or registered trademarks of their respective owners.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.

Diversion contrary to U.S. and international law is strictly prohibited.

EPCOS AG 2016. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

EPCOS AG is a TDK Group Company

SAW Components

SAW GPS + COMPASS + GLONASS

filter

Series/type:

Ordering code:

B8813

B39162B8813P810

Date:

Version:

June 07, 2016

2.2

2June 07, 2016

B8813

1582.47 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Application

■Low-loss RF GPS + COMPASS + GLONASS filter

■Simultaneous usage of GPS, COMPASS and GLO-

NASS bands

■Usable passbands: 2.0 MHz for GPS, 4.092 MHz for

COMPASS and 8.34 MHz for GLONASS

■Very low insertion attenuation

■High out of band selectivity

■Filter impedance 50 Ω

■Unbalanced to unbalanced operation

■No matching network required for operation at 50 Ω

Features

■Package size 1.1 x 0.9 mm2

package height 0.45 mm max.

■RoHS compatible

■Approximate weight 0.0012 g

■Package for Surface Mount Technology (SMT)

■Ni, gold-plated terminals

■Electrostatic Sensitive Device (ESD)

■Moisture Sensitivity Level 3 (MSL3)

side view

top view

0.9

1.1

0.4

0.25

0.3850.385

0.18

0.5

bottom view

0.45 max.

Pin configuration

■1 Input unbalanced

■4 Output unbalanced

■2,3,5 To be grounded

3June 07, 2016

B8813

1582.47 MHz

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics of Filter

Temperature range for specification: T = –30 ˚C to +85˚C

Terminating source impedance: ZS=50Ω

Terminating load impedance: ZL=50Ω

B8813

min. typ.

@ 25 ˚C

max.

Center frequency fC— 1582.47 — MHz

Maximum insertion attenuation αmax

1559.052... 1563.144 MHz — 1.0 1.9 dB

1574.42 ... 1576.42 MHz — 0.85 1.4 dB

1597.55 ... 1605.89 MHz — 1.2 1.9 dB

VSWR Input

1559.052... 1563.144 MHz — 1.50 1.9

1574.42 ... 1576.42 MHz — 1.25 1.8

1597.55 ... 1605.89 MHz — 1.55 1.9

VSWR Output

1559.052... 1563.144 MHz — 1.50 1.9

1574.42 ... 1576.42 MHz — 1.25 1.8

1597.55 ... 1605.89 MHz — 1.55 1.9

Group delay ripple1) (p-p)

1) Measured with an aperture of 2 MHz

∆τ

1597.55 ... 1605.89 MHz — 3 12 ns

Attenuation α

10.0 ... 960.0 MHz 47 50 — dB

960.0 ... 1463.0 MHz 36 40 — dB

1710.0 ... 1785.0 MHz 37 39 — dB

1785.0 ... 1990.0 MHz 37 39 — dB

1990.0 ... 2280.0 MHz 35 39 — dB

2280.0 ... 2400.0 MHz 35 39 — dB

2400.0 ... 2500.0 MHz 33 38 — dB

2500.0 ... 2700.0 MHz 32 36 — dB

2700.0 ... 3000.0 MHz 28 33 — dB

3000.0 ... 6000.0 MHz 15 22 — dB

4June 07, 2016

B8813

1582.47 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Maximum ratings of Filter

Operable temperature range T –30/+85 ˚C

Storage temperature range Tstg –40/+85 ˚C

DC voltage VDC 51)

1) 168h Damp Heat Steady State acc. to IEC60068-2-67 Cy

ESD voltage VESD 502)

2) acc. to JESD22-A115B (MM - Machine Model), 10 negative & 10 positive pulses

Vmachine model

Input power (10000 h, 55˚C)

777 to 915 MHz PIN 28 dBm 1/8 duty cycle,

effective power in the on-state

1710 to 2200 MHz PIN 28 dBm 1/8 duty cycle,

effective power in the on-state

5June 07, 2016

B8813

1582.47 MHz

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Transfer function passband

Transfer function narrowband

6June 07, 2016

B8813

1582.47 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Transfer function wideband

7June 07, 2016

B8813

1582.47 MHz

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Smith chart / VSWR

S11 function

S22 function

8June 07, 2016

B8813

1582.47 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW GPS + COMPASS + GLONASS filter

Data Sheet

Type B8813

Ordering code B39162B8813P810

Marking and package C61157-A8-A30

Packaging F61074-V8255-Z000

Date codes L_1126

S-parameters B8813_NB.s2p, B8813_WB.s2p

see file header for port/pin assignment table

Soldering profile S_6001

RoHS compatible RoHS-compatible means that products are compatible with the

requirements according to Art. 4 (substance restrictions) of Di-

rective 2011/65/EU of the European Parliament and of the

Council of June 8th, 2011, on the restriction of the use of certain

hazardous substances in electrical and electronic equipment

("Directive") with due regard to the application of exemptions as

per Annex III of the Directive in certain cases.

Moldability Before using in overmolding environment, please contact your

EPCOS sales office.

Matching coils See Inductor pdf-catalog

http://

www

.tdk.co.jp/tefe02/coil.htm#aname1

and Data Library for circuit simulation

http://www.tdk.co.jp/etvcl/index.htm

For further information please contact your local EPCOS sales office or visit our webpage at

ww.epcos.com .

Published by EPCOS AG

Systems, Acoustics, Waves Business Group

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2016. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

he international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

he type in question please also contact one of our Sales Offices.

9June 07, 2016

Important notes

he following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately

incumbent on the customer to check and decide whether an EPCOS product with the

properties described in the product speciﬁcation is suitable for use in a particular customer

application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as speciﬁed. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained

by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-speciﬁc products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current

version of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,

CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,

MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,

SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,

SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and

in other countries. Further information will be found on the Internet at